Project

General

Profile

Bug #4859 » osmo-bsc.dug20.rus01.log

keith, 11/10/2020 09:37 PM

 
1
root@tic-epc:/etc/osmocom# LD_LIBRARY_PATH=/lib/x86_64-linux-gnu/ /usr/bin/osmo-bsc -c /home/rhizomatica/src/osmo-bsc/doc/examples/osmo-bsc/ericsson/osmo-bsc.dug20-rus01-4trx.cfg 
2
DNM INFO <0004> fsm.c:461 NM_BTS_SM_OP[0x556b664597e0]{DISABLED_NOTINSTALLED}: Allocated
3
DNM INFO <0004> fsm.c:461 NM_BTS_OP[0x556b66456af0]{DISABLED_NOTINSTALLED}: Allocated
4
DLGLOBAL DEBUG <0015> rate_ctr.c:88 validating counter group 0x556b652dcd80(bts) with 88 counters
5
DNM INFO <0004> fsm.c:461 NM_RCARRIER_OP[0x556b6665e370]{DISABLED_NOTINSTALLED}: Allocated
6
DNM INFO <0004> fsm.c:461 NM_BB_TRANSC_OP[0x556b6665e540]{DISABLED_NOTINSTALLED}: Allocated
7
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6665e710]{NOT_INITIALIZED}: Allocated
8
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6665e840]{DISABLED_NOTINSTALLED}: Allocated
9
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6665ec90]{NOT_INITIALIZED}: Allocated
10
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6665ee40]{DISABLED_NOTINSTALLED}: Allocated
11
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6665f490]{NOT_INITIALIZED}: Allocated
12
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6665f640]{DISABLED_NOTINSTALLED}: Allocated
13
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6665fc90]{NOT_INITIALIZED}: Allocated
14
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6665fe40]{DISABLED_NOTINSTALLED}: Allocated
15
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66660490]{NOT_INITIALIZED}: Allocated
16
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b66660640]{DISABLED_NOTINSTALLED}: Allocated
17
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66660d20]{NOT_INITIALIZED}: Allocated
18
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b66660ed0]{DISABLED_NOTINSTALLED}: Allocated
19
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b666615b0]{NOT_INITIALIZED}: Allocated
20
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b66661760]{DISABLED_NOTINSTALLED}: Allocated
21
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66661e40]{NOT_INITIALIZED}: Allocated
22
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b66661ff0]{DISABLED_NOTINSTALLED}: Allocated
23
DRSL INFO <0003> acc.c:108 (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off)
24
DNM INFO <0004> fsm.c:461 NM_RCARRIER_OP[0x556b66663790]{DISABLED_NOTINSTALLED}: Allocated
25
DNM INFO <0004> fsm.c:461 NM_BB_TRANSC_OP[0x556b666638c0]{DISABLED_NOTINSTALLED}: Allocated
26
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b666639f0]{NOT_INITIALIZED}: Allocated
27
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b66663b20]{DISABLED_NOTINSTALLED}: Allocated
28
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66663ef0]{NOT_INITIALIZED}: Allocated
29
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666640a0]{DISABLED_NOTINSTALLED}: Allocated
30
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b666646f0]{NOT_INITIALIZED}: Allocated
31
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666648a0]{DISABLED_NOTINSTALLED}: Allocated
32
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66664ef0]{NOT_INITIALIZED}: Allocated
33
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666650a0]{DISABLED_NOTINSTALLED}: Allocated
34
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b666656f0]{NOT_INITIALIZED}: Allocated
35
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666658a0]{DISABLED_NOTINSTALLED}: Allocated
36
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66665ef0]{NOT_INITIALIZED}: Allocated
37
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666660a0]{DISABLED_NOTINSTALLED}: Allocated
38
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b666666f0]{NOT_INITIALIZED}: Allocated
39
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666668a0]{DISABLED_NOTINSTALLED}: Allocated
40
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66666f80]{NOT_INITIALIZED}: Allocated
41
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b66667130]{DISABLED_NOTINSTALLED}: Allocated
42
DNM INFO <0004> fsm.c:461 NM_RCARRIER_OP[0x556b66667ef0]{DISABLED_NOTINSTALLED}: Allocated
43
DNM INFO <0004> fsm.c:461 NM_BB_TRANSC_OP[0x556b666680c0]{DISABLED_NOTINSTALLED}: Allocated
44
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66668290]{NOT_INITIALIZED}: Allocated
45
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666683c0]{DISABLED_NOTINSTALLED}: Allocated
46
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66668810]{NOT_INITIALIZED}: Allocated
47
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666689c0]{DISABLED_NOTINSTALLED}: Allocated
48
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66669010]{NOT_INITIALIZED}: Allocated
49
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666691c0]{DISABLED_NOTINSTALLED}: Allocated
50
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66669810]{NOT_INITIALIZED}: Allocated
51
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666699c0]{DISABLED_NOTINSTALLED}: Allocated
52
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666a010]{NOT_INITIALIZED}: Allocated
53
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666a1c0]{DISABLED_NOTINSTALLED}: Allocated
54
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666a810]{NOT_INITIALIZED}: Allocated
55
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666a9c0]{DISABLED_NOTINSTALLED}: Allocated
56
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666b010]{NOT_INITIALIZED}: Allocated
57
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666b1c0]{DISABLED_NOTINSTALLED}: Allocated
58
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666b8a0]{NOT_INITIALIZED}: Allocated
59
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666ba50]{DISABLED_NOTINSTALLED}: Allocated
60
DNM INFO <0004> fsm.c:461 NM_RCARRIER_OP[0x556b6666c8b0]{DISABLED_NOTINSTALLED}: Allocated
61
DNM INFO <0004> fsm.c:461 NM_BB_TRANSC_OP[0x556b6666ca80]{DISABLED_NOTINSTALLED}: Allocated
62
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666cc50]{NOT_INITIALIZED}: Allocated
63
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666cd80]{DISABLED_NOTINSTALLED}: Allocated
64
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666d150]{NOT_INITIALIZED}: Allocated
65
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666d300]{DISABLED_NOTINSTALLED}: Allocated
66
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666d950]{NOT_INITIALIZED}: Allocated
67
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666db00]{DISABLED_NOTINSTALLED}: Allocated
68
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666e150]{NOT_INITIALIZED}: Allocated
69
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666e300]{DISABLED_NOTINSTALLED}: Allocated
70
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666e950]{NOT_INITIALIZED}: Allocated
71
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666eb00]{DISABLED_NOTINSTALLED}: Allocated
72
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666f150]{NOT_INITIALIZED}: Allocated
73
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666f300]{DISABLED_NOTINSTALLED}: Allocated
74
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666f950]{NOT_INITIALIZED}: Allocated
75
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666fb00]{DISABLED_NOTINSTALLED}: Allocated
76
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b666701e0]{NOT_INITIALIZED}: Allocated
77
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b66670390]{DISABLED_NOTINSTALLED}: Allocated
78
DLGLOBAL DEBUG <0015> rate_ctr.c:88 validating counter group 0x7fb5692b34e0(e1inp) with 5 counters
79
DLINP INFO <0017> e1_input.c:466 E1L(0) Line (0x556b666711f0) reference count ctor changed 0 -> 1 [1 (ctor)]
80
DLGLOBAL NOTICE <0015> telnet_interface.c:104 Available via telnet 127.0.0.1 4242
81
DLMI DEBUG <0019> e1_config.c:161 (bts=0) e1_reconfig_bts
82
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 0 -> 1 [2 (ctor,e1inp_sign_link)]
83
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 1 -> 2 [3 (ctor,2*e1inp_sign_link)]
84
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 2 -> 3 [4 (ctor,3*e1inp_sign_link)]
85
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,0,0)
86
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,0,1)
87
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,0,2)
88
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,0,3)
89
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,0,4)
90
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,0,5)
91
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,0,6)
92
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,0,7)
93
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 3 -> 4 [5 (ctor,4*e1inp_sign_link)]
94
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 4 -> 5 [6 (ctor,5*e1inp_sign_link)]
95
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,1,0)
96
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,1,1)
97
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,1,2)
98
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,1,3)
99
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,1,4)
100
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,1,5)
101
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,1,6)
102
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,1,7)
103
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 5 -> 6 [7 (ctor,6*e1inp_sign_link)]
104
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 6 -> 7 [8 (ctor,7*e1inp_sign_link)]
105
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,2,0)
106
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,2,1)
107
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,2,2)
108
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,2,3)
109
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,2,4)
110
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,2,5)
111
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,2,6)
112
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,2,7)
113
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 7 -> 8 [9 (ctor,8*e1inp_sign_link)]
114
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 8 -> 9 [10 (ctor,9*e1inp_sign_link)]
115
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,3,0)
116
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,3,1)
117
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,3,2)
118
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,3,3)
119
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,3,4)
120
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,3,5)
121
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,3,6)
122
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,3,7)
123
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'LINE-INIT' received
124
DLLAPD INFO <0016> input/lapd.c:194 (0:1-T62): LAPD state change on TEI 62: NONE -> ASSIGNED
125
DLLAPD NOTICE <0016> input/lapd.c:251 (0:1-T62-S62): LAPD Allocating SAP for SAPI=62 / TEI=62 (dl=0x556b664578f0, sap=0x556b664578d0)
126
DLLAPD NOTICE <0016> input/lapd.c:261 (0:1-T62-S62): k=1 N200=50 N201=260 T200=0.300000 T203=10.0
127
DLLAPD INFO <0016> lapd_core.c:314 ((0:1-T62-S62)) Init DL layer: sequence range = 128, k = 1, history range = 2
128
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
129
DLLAPD NOTICE <0016> input/lapd.c:523 (0:1-T62-S62): LAPD DL-ESTABLISH request TEI=62 SAPI=62
130
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
131
DLLAPD INFO <0016> lapd_core.c:1756 ((0:1-T62-S62)) perform normal establishm. (SABM)
132
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
133
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 7f 
134
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
135
DLLAPD INFO <0016> input/lapd.c:194 (0:1-T0): LAPD state change on TEI 0: NONE -> ASSIGNED
136
DLLAPD NOTICE <0016> input/lapd.c:251 (0:1-T0-S62): LAPD Allocating SAP for SAPI=62 / TEI=0 (dl=0x556b66454c00, sap=0x556b66454be0)
137
DLLAPD NOTICE <0016> input/lapd.c:261 (0:1-T0-S62): k=1 N200=50 N201=260 T200=0.300000 T203=10.0
138
DLLAPD INFO <0016> lapd_core.c:314 ((0:1-T0-S62)) Init DL layer: sequence range = 128, k = 1, history range = 2
139
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
140
DLLAPD NOTICE <0016> input/lapd.c:523 (0:1-T0-S62): LAPD DL-ESTABLISH request TEI=0 SAPI=62
141
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S62)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
142
DLLAPD INFO <0016> lapd_core.c:1756 ((0:1-T0-S62)) perform normal establishm. (SABM)
143
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
144
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: fa 01 7f 
145
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S62)) start T200 (timeout=0.300000s)
146
DLLAPD NOTICE <0016> input/lapd.c:251 (0:1-T0-S0): LAPD Allocating SAP for SAPI=0 / TEI=0 (dl=0x556b666568b0, sap=0x556b66656890)
147
DLLAPD NOTICE <0016> input/lapd.c:261 (0:1-T0-S0): k=2 N200=50 N201=260 T200=0.300000 T203=10.0
148
DLLAPD INFO <0016> lapd_core.c:314 ((0:1-T0-S0)) Init DL layer: sequence range = 128, k = 2, history range = 4
149
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
150
DLLAPD NOTICE <0016> input/lapd.c:523 (0:1-T0-S0): LAPD DL-ESTABLISH request TEI=0 SAPI=0
151
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
152
DLLAPD INFO <0016> lapd_core.c:1756 ((0:1-T0-S0)) perform normal establishm. (SABM)
153
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
154
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 7f 
155
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
156
DLLAPD INFO <0016> input/lapd.c:194 (0:4-T1): LAPD state change on TEI 1: NONE -> ASSIGNED
157
DLLAPD NOTICE <0016> input/lapd.c:251 (0:4-T1-S62): LAPD Allocating SAP for SAPI=62 / TEI=1 (dl=0x556b6667d130, sap=0x556b6667d110)
158
DLLAPD NOTICE <0016> input/lapd.c:261 (0:4-T1-S62): k=1 N200=50 N201=260 T200=0.300000 T203=10.0
159
DLLAPD INFO <0016> lapd_core.c:314 ((0:4-T1-S62)) Init DL layer: sequence range = 128, k = 1, history range = 2
160
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
161
DLLAPD NOTICE <0016> input/lapd.c:523 (0:4-T1-S62): LAPD DL-ESTABLISH request TEI=1 SAPI=62
162
DLLAPD INFO <0016> lapd_core.c:2233 ((0:4-T1-S62)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
163
DLLAPD INFO <0016> lapd_core.c:1756 ((0:4-T1-S62)) perform normal establishm. (SABM)
164
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
165
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: fa 03 7f 
166
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S62)) start T200 (timeout=0.300000s)
167
DLLAPD NOTICE <0016> input/lapd.c:251 (0:4-T1-S0): LAPD Allocating SAP for SAPI=0 / TEI=1 (dl=0x556b6667d480, sap=0x556b6667d460)
168
DLLAPD NOTICE <0016> input/lapd.c:261 (0:4-T1-S0): k=2 N200=50 N201=260 T200=0.300000 T203=10.0
169
DLLAPD INFO <0016> lapd_core.c:314 ((0:4-T1-S0)) Init DL layer: sequence range = 128, k = 2, history range = 4
170
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
171
DLLAPD NOTICE <0016> input/lapd.c:523 (0:4-T1-S0): LAPD DL-ESTABLISH request TEI=1 SAPI=0
172
DLLAPD INFO <0016> lapd_core.c:2233 ((0:4-T1-S0)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
173
DLLAPD INFO <0016> lapd_core.c:1756 ((0:4-T1-S0)) perform normal establishm. (SABM)
174
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
175
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 7f 
176
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
177
DLLAPD INFO <0016> input/lapd.c:194 (0:7-T2): LAPD state change on TEI 2: NONE -> ASSIGNED
178
DLLAPD NOTICE <0016> input/lapd.c:251 (0:7-T2-S62): LAPD Allocating SAP for SAPI=62 / TEI=2 (dl=0x556b6667d880, sap=0x556b6667d860)
179
DLLAPD NOTICE <0016> input/lapd.c:261 (0:7-T2-S62): k=1 N200=50 N201=260 T200=0.300000 T203=10.0
180
DLLAPD INFO <0016> lapd_core.c:314 ((0:7-T2-S62)) Init DL layer: sequence range = 128, k = 1, history range = 2
181
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S62)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
182
DLLAPD NOTICE <0016> input/lapd.c:523 (0:7-T2-S62): LAPD DL-ESTABLISH request TEI=2 SAPI=62
183
DLLAPD INFO <0016> lapd_core.c:2233 ((0:7-T2-S62)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
184
DLLAPD INFO <0016> lapd_core.c:1756 ((0:7-T2-S62)) perform normal establishm. (SABM)
185
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S62)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
186
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: fa 05 7f 
187
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S62)) start T200 (timeout=0.300000s)
188
DLLAPD NOTICE <0016> input/lapd.c:251 (0:7-T2-S0): LAPD Allocating SAP for SAPI=0 / TEI=2 (dl=0x556b6667dbd0, sap=0x556b6667dbb0)
189
DLLAPD NOTICE <0016> input/lapd.c:261 (0:7-T2-S0): k=2 N200=50 N201=260 T200=0.300000 T203=10.0
190
DLLAPD INFO <0016> lapd_core.c:314 ((0:7-T2-S0)) Init DL layer: sequence range = 128, k = 2, history range = 4
191
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
192
DLLAPD NOTICE <0016> input/lapd.c:523 (0:7-T2-S0): LAPD DL-ESTABLISH request TEI=2 SAPI=0
193
DLLAPD INFO <0016> lapd_core.c:2233 ((0:7-T2-S0)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
194
DLLAPD INFO <0016> lapd_core.c:1756 ((0:7-T2-S0)) perform normal establishm. (SABM)
195
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
196
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 7f 
197
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
198
DLLAPD INFO <0016> input/lapd.c:194 (0:10-T3): LAPD state change on TEI 3: NONE -> ASSIGNED
199
DLLAPD NOTICE <0016> input/lapd.c:251 (0:10-T3-S62): LAPD Allocating SAP for SAPI=62 / TEI=3 (dl=0x556b6667e070, sap=0x556b6667e050)
200
DLLAPD NOTICE <0016> input/lapd.c:261 (0:10-T3-S62): k=1 N200=50 N201=260 T200=0.300000 T203=10.0
201
DLLAPD INFO <0016> lapd_core.c:314 ((0:10-T3-S62)) Init DL layer: sequence range = 128, k = 1, history range = 2
202
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
203
DLLAPD NOTICE <0016> input/lapd.c:523 (0:10-T3-S62): LAPD DL-ESTABLISH request TEI=3 SAPI=62
204
DLLAPD INFO <0016> lapd_core.c:2233 ((0:10-T3-S62)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
205
DLLAPD INFO <0016> lapd_core.c:1756 ((0:10-T3-S62)) perform normal establishm. (SABM)
206
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
207
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: fa 07 7f 
208
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S62)) start T200 (timeout=0.300000s)
209
DLLAPD NOTICE <0016> input/lapd.c:251 (0:10-T3-S0): LAPD Allocating SAP for SAPI=0 / TEI=3 (dl=0x556b6667e3c0, sap=0x556b6667e3a0)
210
DLLAPD NOTICE <0016> input/lapd.c:261 (0:10-T3-S0): k=2 N200=50 N201=260 T200=0.300000 T203=10.0
211
DLLAPD INFO <0016> lapd_core.c:314 ((0:10-T3-S0)) Init DL layer: sequence range = 128, k = 2, history range = 4
212
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
213
DLLAPD NOTICE <0016> input/lapd.c:523 (0:10-T3-S0): LAPD DL-ESTABLISH request TEI=3 SAPI=0
214
DLLAPD INFO <0016> lapd_core.c:2233 ((0:10-T3-S0)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
215
DLLAPD INFO <0016> lapd_core.c:1756 ((0:10-T3-S0)) perform normal establishm. (SABM)
216
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
217
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 7f 
218
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
219
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'LINE-INIT' received
220
DLCTRL NOTICE <001c> control_if.c:911 CTRL at 127.0.0.1 4249
221
DLMGCP NOTICE <0025> mgcp_client.c:780 MGCP client: using endpoint domain '@mgw'
222
DLMGCP INFO <0025> mgcp_client.c:851 MGCP GW connection: r=127.0.0.1:2427<->l=127.0.0.1:2727
223
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
224
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 3, sapi(0) tei(0)
225
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 73 
226
DLLAPD INFO <0016> lapd_core.c:1170 ((0:1-T0-S0)) UA received in state LAPD_STATE_SABM_SENT
227
DLLAPD INFO <0016> lapd_core.c:1224 ((0:1-T0-S0)) UA in SABM state
228
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
229
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
230
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
231
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1250
232
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:1-T0-S0)) LAPD DL-ESTABLISH confirm TEI=0 SAPI=0
233
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:1) DL_EST: sapi(0) tei(0)
234
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
235
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
236
DRSL NOTICE <0003> osmo_bsc_main.c:318 (bts=0,trx=0) bootstrapping RSL on ARFCN 123 using MCC-MNC 901-70 LAC=1 CID=0 BSIC=63
237
DRR INFO <0002> system_information.c:697 Serving cell: 119 121 123
238
DRR DEBUG <0002> bts_trx.c:332 SI1: 55 06 19 05 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e5 04 00 2b 
239
DRR DEBUG <0002> bts_trx.c:332 SI2: 59 06 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff e5 04 00 
240
DRR DEBUG <0002> bts_trx.c:334 SI2bis: OFF
241
DRR DEBUG <0002> bts_trx.c:334 SI2ter: OFF
242
DRR DEBUG <0002> bts_trx.c:334 SI2quater: OFF
243
DRR DEBUG <0002> bts_trx.c:332 SI3: 49 06 1b 00 00 09 f1 07 00 01 c9 03 05 27 4e 00 e5 04 00 29 2b 2b 2b 
244
DRR DEBUG <0002> bts_trx.c:332 SI4: 31 06 1c 09 f1 07 00 01 4e 00 e5 04 00 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 
245
DRR DEBUG <0002> bts_trx.c:332 SI5: 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2b 2b 2b 2b 2b 
246
DRR DEBUG <0002> bts_trx.c:334 SI5bis: OFF
247
DRR DEBUG <0002> bts_trx.c:334 SI5ter: OFF
248
DRR DEBUG <0002> bts_trx.c:332 SI6: 06 1e 00 00 09 f1 07 00 01 27 ff 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 
249
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-0-0-NONE)[0x556b6665e710]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
250
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-0-0-NONE)[0x556b6665e710]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
251
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-0-1-NONE)[0x556b6665ec90]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
252
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-0-1-NONE)[0x556b6665ec90]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
253
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-0-2-NONE)[0x556b6665f490]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
254
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-0-2-NONE)[0x556b6665f490]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
255
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-0-3-NONE)[0x556b6665fc90]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
256
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-0-3-NONE)[0x556b6665fc90]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
257
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-0-4-NONE)[0x556b66660490]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
258
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-0-4-NONE)[0x556b66660490]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
259
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-0-5-NONE)[0x556b66660d20]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
260
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-0-5-NONE)[0x556b66660d20]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
261
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-0-6-NONE)[0x556b666615b0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
262
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-0-6-NONE)[0x556b666615b0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
263
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-0-7-NONE)[0x556b66661e40]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
264
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-0-7-NONE)[0x556b66661e40]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
265
DCTRL DEBUG <000b> osmo_bsc_ctrl.c:283 BTS connection (re)established, sending TRAP.
266
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 0c 11 01 80 1e 01 27 17 55 06 19 05 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e5 04 00 2b 
267
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
268
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 31
269
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
270
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
271
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 31 sent 0 left 31 N201 260 length 31 first byte 0c
272
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=0
273
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
274
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
275
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 00 00 0c 11 01 80 1e 01 27 17 55 06 19 05 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e5 04 00 2b 
276
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 31 sent 31 left 0 N201 260 length 0 first byte 0c
277
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
278
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 02 
279
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
280
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 0
281
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
282
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
283
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
284
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(0) tei(0)
285
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 00 02 10 1c 1a 02 62 11 1c 11 01 80 
286
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T0-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
287
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T0-S0)) incrementing V(R) to 1
288
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
289
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
290
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T0-S0)) message in single I frame
291
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 10 1c 1a 02 62 11 1c 11 01 80  sapi=0 tei=0
292
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=0) discarding RSL message received in locked administrative state
293
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1672
294
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T0-S0)) we are not busy and have no pending data, send RR
295
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 02 
296
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 0c 11 01 80 1e 02 27 17 59 06 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff e5 04 00 
297
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
298
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 31
299
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
300
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
301
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 31 sent 0 left 31 N201 260 length 31 first byte 0c
302
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=1
303
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
304
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
305
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 02 02 0c 11 01 80 1e 02 27 17 59 06 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff e5 04 00 
306
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 31 sent 31 left 0 N201 260 length 0 first byte 0c
307
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
308
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 04 
309
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
310
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 1
311
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
312
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
313
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
314
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(0) tei(0)
315
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 02 04 10 1c 1a 02 62 11 1c 11 01 80 
316
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T0-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
317
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T0-S0)) incrementing V(R) to 2
318
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
319
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
320
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T0-S0)) message in single I frame
321
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 10 1c 1a 02 62 11 1c 11 01 80  sapi=0 tei=0
322
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=0) discarding RSL message received in locked administrative state
323
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1672
324
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T0-S0)) we are not busy and have no pending data, send RR
325
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 04 
326
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 0c 11 01 80 1e 0a 
327
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
328
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 6
329
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
330
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
331
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 6 sent 0 left 6 N201 260 length 6 first byte 0c
332
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=2
333
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
334
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
335
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 04 04 0c 11 01 80 1e 0a 
336
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 6 sent 6 left 0 N201 260 length 0 first byte 0c
337
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
338
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 06 
339
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
340
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 2
341
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
342
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
343
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
344
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(0) tei(0)
345
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 04 06 10 1c 1a 02 62 11 1c 11 01 80 
346
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T0-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
347
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T0-S0)) incrementing V(R) to 3
348
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
349
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
350
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T0-S0)) message in single I frame
351
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 10 1c 1a 02 62 11 1c 11 01 80  sapi=0 tei=0
352
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=0) discarding RSL message received in locked administrative state
353
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1672
354
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T0-S0)) we are not busy and have no pending data, send RR
355
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 06 
356
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 0c 11 01 80 1e 0b 
357
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
358
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 6
359
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
360
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
361
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 6 sent 0 left 6 N201 260 length 6 first byte 0c
362
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=3
363
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
364
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
365
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 06 06 0c 11 01 80 1e 0b 
366
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 6 sent 6 left 0 N201 260 length 0 first byte 0c
367
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
368
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 08 
369
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
370
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 3
371
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
372
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
373
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
374
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(0) tei(0)
375
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 06 08 10 1c 1a 02 62 11 1c 11 01 80 
376
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T0-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
377
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T0-S0)) incrementing V(R) to 4
378
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
379
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
380
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T0-S0)) message in single I frame
381
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 10 1c 1a 02 62 11 1c 11 01 80  sapi=0 tei=0
382
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=0) discarding RSL message received in locked administrative state
383
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1672
384
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T0-S0)) we are not busy and have no pending data, send RR
385
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 08 
386
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 0c 11 01 80 1e 29 
387
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
388
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 6
389
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
390
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
391
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 6 sent 0 left 6 N201 260 length 6 first byte 0c
392
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=4
393
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
394
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
395
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 08 08 0c 11 01 80 1e 29 
396
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 6 sent 6 left 0 N201 260 length 0 first byte 0c
397
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
398
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 0a 
399
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
400
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 4
401
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
402
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
403
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
404
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(0) tei(0)
405
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 08 0a 10 1c 1a 02 62 11 1c 11 01 80 
406
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T0-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
407
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T0-S0)) incrementing V(R) to 5
408
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
409
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
410
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T0-S0)) message in single I frame
411
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 10 1c 1a 02 62 11 1c 11 01 80  sapi=0 tei=0
412
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=0) discarding RSL message received in locked administrative state
413
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1672
414
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T0-S0)) we are not busy and have no pending data, send RR
415
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 0a 
416
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 0c 11 01 80 1e 03 27 17 49 06 1b 00 00 09 f1 07 00 01 c9 03 05 27 4e 00 e5 04 00 29 2b 2b 2b 
417
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
418
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 31
419
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
420
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
421
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 31 sent 0 left 31 N201 260 length 31 first byte 0c
422
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=5
423
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
424
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
425
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 0a 0a 0c 11 01 80 1e 03 27 17 49 06 1b 00 00 09 f1 07 00 01 c9 03 05 27 4e 00 e5 04 00 29 2b 2b 2b 
426
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 31 sent 31 left 0 N201 260 length 0 first byte 0c
427
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
428
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 0c 
429
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
430
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 5
431
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
432
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
433
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
434
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(0) tei(0)
435
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 0a 0c 10 1c 1a 02 62 11 1c 11 01 80 
436
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T0-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
437
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T0-S0)) incrementing V(R) to 6
438
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
439
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
440
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T0-S0)) message in single I frame
441
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 10 1c 1a 02 62 11 1c 11 01 80  sapi=0 tei=0
442
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=0) discarding RSL message received in locked administrative state
443
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1672
444
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T0-S0)) we are not busy and have no pending data, send RR
445
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 0c 
446
DLLAPD INFO <0016> lapd_core.c:594 ((0:1-T62-S62)) Timeout T200 state=LAPD_STATE_SABM_SENT
447
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 7f 
448
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
449
DLLAPD INFO <0016> lapd_core.c:594 ((0:1-T0-S62)) Timeout T200 state=LAPD_STATE_SABM_SENT
450
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: fa 01 7f 
451
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S62)) start T200 (timeout=0.300000s)
452
DLLAPD INFO <0016> lapd_core.c:594 ((0:4-T1-S62)) Timeout T200 state=LAPD_STATE_SABM_SENT
453
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: fa 03 7f 
454
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S62)) start T200 (timeout=0.300000s)
455
DLLAPD INFO <0016> lapd_core.c:594 ((0:4-T1-S0)) Timeout T200 state=LAPD_STATE_SABM_SENT
456
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 7f 
457
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
458
DLLAPD INFO <0016> lapd_core.c:594 ((0:7-T2-S62)) Timeout T200 state=LAPD_STATE_SABM_SENT
459
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: fa 05 7f 
460
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S62)) start T200 (timeout=0.300000s)
461
DLLAPD INFO <0016> lapd_core.c:594 ((0:7-T2-S0)) Timeout T200 state=LAPD_STATE_SABM_SENT
462
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 7f 
463
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
464
DLLAPD INFO <0016> lapd_core.c:594 ((0:10-T3-S62)) Timeout T200 state=LAPD_STATE_SABM_SENT
465
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: fa 07 7f 
466
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S62)) start T200 (timeout=0.300000s)
467
DLLAPD INFO <0016> lapd_core.c:594 ((0:10-T3-S0)) Timeout T200 state=LAPD_STATE_SABM_SENT
468
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 7f 
469
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
470
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 3, sapi(62) tei(1)
471
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: fa 03 73 
472
DLLAPD INFO <0016> lapd_core.c:1170 ((0:4-T1-S62)) UA received in state LAPD_STATE_SABM_SENT
473
DLLAPD INFO <0016> lapd_core.c:1224 ((0:4-T1-S62)) UA in SABM state
474
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S62)) stop T200
475
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
476
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
477
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1250
478
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:4-T1-S62)) LAPD DL-ESTABLISH confirm TEI=1 SAPI=62
479
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:4) DL_EST: sapi(62) tei(1)
480
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
481
DNM NOTICE <0004> bts_ericsson_rbs2000.c:55 bootstrapping OML for TRX 0/1
482
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
483
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
484
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
485
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
486
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
487
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
488
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 3, sapi(62) tei(2)
489
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: fa 05 73 
490
DLLAPD INFO <0016> lapd_core.c:1170 ((0:7-T2-S62)) UA received in state LAPD_STATE_SABM_SENT
491
DLLAPD INFO <0016> lapd_core.c:1224 ((0:7-T2-S62)) UA in SABM state
492
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S62)) stop T200
493
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S62)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
494
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
495
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1250
496
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:7-T2-S62)) LAPD DL-ESTABLISH confirm TEI=2 SAPI=62
497
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:7) DL_EST: sapi(62) tei(2)
498
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
499
DNM NOTICE <0004> bts_ericsson_rbs2000.c:55 bootstrapping OML for TRX 0/2
500
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
501
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
502
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
503
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
504
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
505
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
506
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 3, sapi(62) tei(3)
507
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: fa 07 73 
508
DLLAPD INFO <0016> lapd_core.c:1170 ((0:10-T3-S62)) UA received in state LAPD_STATE_SABM_SENT
509
DLLAPD INFO <0016> lapd_core.c:1224 ((0:10-T3-S62)) UA in SABM state
510
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S62)) stop T200
511
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
512
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
513
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1250
514
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:10-T3-S62)) LAPD DL-ESTABLISH confirm TEI=3 SAPI=62
515
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:10) DL_EST: sapi(62) tei(3)
516
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
517
DNM NOTICE <0004> bts_ericsson_rbs2000.c:55 bootstrapping OML for TRX 0/3
518
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
519
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
520
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
521
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
522
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
523
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
524
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 3, sapi(62) tei(0)
525
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 01 73 
526
DLLAPD INFO <0016> lapd_core.c:1170 ((0:1-T0-S62)) UA received in state LAPD_STATE_SABM_SENT
527
DLLAPD INFO <0016> lapd_core.c:1224 ((0:1-T0-S62)) UA in SABM state
528
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S62)) stop T200
529
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
530
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
531
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1250
532
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:1-T0-S62)) LAPD DL-ESTABLISH confirm TEI=0 SAPI=62
533
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:1) DL_EST: sapi(62) tei(0)
534
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
535
DNM NOTICE <0004> bts_ericsson_rbs2000.c:55 bootstrapping OML for TRX 0/0
536
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
537
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
538
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
539
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
540
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
541
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
542
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 3, sapi(0) tei(1)
543
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 73 
544
DLLAPD INFO <0016> lapd_core.c:1170 ((0:4-T1-S0)) UA received in state LAPD_STATE_SABM_SENT
545
DLLAPD INFO <0016> lapd_core.c:1224 ((0:4-T1-S0)) UA in SABM state
546
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
547
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
548
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
549
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1250
550
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:4-T1-S0)) LAPD DL-ESTABLISH confirm TEI=1 SAPI=0
551
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:4) DL_EST: sapi(0) tei(1)
552
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
553
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
554
DRSL NOTICE <0003> osmo_bsc_main.c:318 (bts=0,trx=1) bootstrapping RSL on ARFCN 121 using MCC-MNC 901-70 LAC=1 CID=0 BSIC=63
555
DRR DEBUG <0002> bts_trx.c:332 SI5: 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2b 2b 2b 2b 2b 
556
DRR DEBUG <0002> bts_trx.c:334 SI5bis: OFF
557
DRR DEBUG <0002> bts_trx.c:334 SI5ter: OFF
558
DRR DEBUG <0002> bts_trx.c:332 SI6: 06 1e 00 00 09 f1 07 00 01 27 ff 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 
559
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-1-0-NONE)[0x556b666639f0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
560
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-1-0-NONE)[0x556b666639f0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
561
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-1-1-NONE)[0x556b66663ef0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
562
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-1-1-NONE)[0x556b66663ef0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
563
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-1-2-NONE)[0x556b666646f0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
564
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-1-2-NONE)[0x556b666646f0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
565
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-1-3-NONE)[0x556b66664ef0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
566
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-1-3-NONE)[0x556b66664ef0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
567
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-1-4-NONE)[0x556b666656f0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
568
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-1-4-NONE)[0x556b666656f0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
569
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-1-5-NONE)[0x556b66665ef0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
570
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-1-5-NONE)[0x556b66665ef0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
571
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-1-6-NONE)[0x556b666666f0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
572
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-1-6-NONE)[0x556b666666f0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
573
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-1-7-NONE)[0x556b66666f80]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
574
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-1-7-NONE)[0x556b66666f80]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
575
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:4) TX: 10 1a 1e 05 0b 00 12 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
576
DLLAPD INFO <0016> lapd_core.c:2233 ((0:4-T1-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
577
DLLAPD INFO <0016> lapd_core.c:1816 ((0:4-T1-S0)) writing message to send-queue: l3len: 25
578
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1822
579
DLLAPD INFO <0016> lapd_core.c:1877 ((0:4-T1-S0)) get message from send-queue
580
DLLAPD INFO <0016> lapd_core.c:1888 ((0:4-T1-S0)) msg-len 25 sent 0 left 25 N201 260 length 25 first byte 10
581
DLLAPD INFO <0016> lapd_core.c:1897 ((0:4-T1-S0)) send I frame V(S)=0
582
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
583
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
584
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 00 00 10 1a 1e 05 0b 00 12 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
585
DLLAPD INFO <0016> lapd_core.c:1888 ((0:4-T1-S0)) msg-len 25 sent 25 left 0 N201 260 length 0 first byte 10
586
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 3, sapi(0) tei(2)
587
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 02 05 73 
588
DLLAPD INFO <0016> lapd_core.c:1170 ((0:7-T2-S0)) UA received in state LAPD_STATE_SABM_SENT
589
DLLAPD INFO <0016> lapd_core.c:1224 ((0:7-T2-S0)) UA in SABM state
590
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S0)) stop T200
591
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
592
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
593
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1250
594
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:7-T2-S0)) LAPD DL-ESTABLISH confirm TEI=2 SAPI=0
595
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:7) DL_EST: sapi(0) tei(2)
596
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
597
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
598
DRSL NOTICE <0003> osmo_bsc_main.c:318 (bts=0,trx=2) bootstrapping RSL on ARFCN 119 using MCC-MNC 901-70 LAC=1 CID=0 BSIC=63
599
DRR DEBUG <0002> bts_trx.c:332 SI5: 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2b 2b 2b 2b 2b 
600
DRR DEBUG <0002> bts_trx.c:334 SI5bis: OFF
601
DRR DEBUG <0002> bts_trx.c:334 SI5ter: OFF
602
DRR DEBUG <0002> bts_trx.c:332 SI6: 06 1e 00 00 09 f1 07 00 01 27 ff 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 
603
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-2-0-NONE)[0x556b66668290]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
604
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-2-0-NONE)[0x556b66668290]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
605
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-2-1-NONE)[0x556b66668810]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
606
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-2-1-NONE)[0x556b66668810]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
607
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-2-2-NONE)[0x556b66669010]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
608
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-2-2-NONE)[0x556b66669010]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
609
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-2-3-NONE)[0x556b66669810]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
610
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-2-3-NONE)[0x556b66669810]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
611
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-2-4-NONE)[0x556b6666a010]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
612
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-2-4-NONE)[0x556b6666a010]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
613
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-2-5-NONE)[0x556b6666a810]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
614
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-2-5-NONE)[0x556b6666a810]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
615
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-2-6-NONE)[0x556b6666b010]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
616
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-2-6-NONE)[0x556b6666b010]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
617
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-2-7-NONE)[0x556b6666b8a0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
618
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-2-7-NONE)[0x556b6666b8a0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
619
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 3, sapi(0) tei(3)
620
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 73 
621
DLLAPD INFO <0016> lapd_core.c:1170 ((0:10-T3-S0)) UA received in state LAPD_STATE_SABM_SENT
622
DLLAPD INFO <0016> lapd_core.c:1224 ((0:10-T3-S0)) UA in SABM state
623
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
624
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
625
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
626
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1250
627
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:10-T3-S0)) LAPD DL-ESTABLISH confirm TEI=3 SAPI=0
628
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:10) DL_EST: sapi(0) tei(3)
629
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
630
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
631
DRSL NOTICE <0003> osmo_bsc_main.c:318 (bts=0,trx=3) bootstrapping RSL on ARFCN 119 using MCC-MNC 901-70 LAC=1 CID=0 BSIC=63
632
DRR DEBUG <0002> bts_trx.c:332 SI5: 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2b 2b 2b 2b 2b 
633
DRR DEBUG <0002> bts_trx.c:334 SI5bis: OFF
634
DRR DEBUG <0002> bts_trx.c:334 SI5ter: OFF
635
DRR DEBUG <0002> bts_trx.c:332 SI6: 06 1e 00 00 09 f1 07 00 01 27 ff 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 
636
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-3-0-NONE)[0x556b6666cc50]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
637
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-3-0-NONE)[0x556b6666cc50]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
638
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-3-1-NONE)[0x556b6666d150]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
639
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-3-1-NONE)[0x556b6666d150]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
640
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-3-2-NONE)[0x556b6666d950]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
641
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-3-2-NONE)[0x556b6666d950]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
642
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-3-3-NONE)[0x556b6666e150]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
643
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-3-3-NONE)[0x556b6666e150]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
644
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-3-4-NONE)[0x556b6666e950]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
645
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-3-4-NONE)[0x556b6666e950]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
646
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-3-5-NONE)[0x556b6666f150]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
647
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-3-5-NONE)[0x556b6666f150]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
648
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-3-6-NONE)[0x556b6666f950]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
649
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-3-6-NONE)[0x556b6666f950]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
650
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-3-7-NONE)[0x556b666701e0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
651
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-3-7-NONE)[0x556b666701e0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
652
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:7) TX: 10 1a 1e 05 0b 00 12 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
653
DLLAPD INFO <0016> lapd_core.c:2233 ((0:7-T2-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
654
DLLAPD INFO <0016> lapd_core.c:1816 ((0:7-T2-S0)) writing message to send-queue: l3len: 25
655
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1822
656
DLLAPD INFO <0016> lapd_core.c:1877 ((0:7-T2-S0)) get message from send-queue
657
DLLAPD INFO <0016> lapd_core.c:1888 ((0:7-T2-S0)) msg-len 25 sent 0 left 25 N201 260 length 25 first byte 10
658
DLLAPD INFO <0016> lapd_core.c:1897 ((0:7-T2-S0)) send I frame V(S)=0
659
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
660
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
661
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 00 00 10 1a 1e 05 0b 00 12 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
662
DLLAPD INFO <0016> lapd_core.c:1888 ((0:7-T2-S0)) msg-len 25 sent 25 left 0 N201 260 length 0 first byte 10
663
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:10) TX: 10 1a 1e 05 0b 00 12 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
664
DLLAPD INFO <0016> lapd_core.c:2233 ((0:10-T3-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
665
DLLAPD INFO <0016> lapd_core.c:1816 ((0:10-T3-S0)) writing message to send-queue: l3len: 25
666
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1822
667
DLLAPD INFO <0016> lapd_core.c:1877 ((0:10-T3-S0)) get message from send-queue
668
DLLAPD INFO <0016> lapd_core.c:1888 ((0:10-T3-S0)) msg-len 25 sent 0 left 25 N201 260 length 25 first byte 10
669
DLLAPD INFO <0016> lapd_core.c:1897 ((0:10-T3-S0)) send I frame V(S)=0
670
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
671
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
672
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 00 00 10 1a 1e 05 0b 00 12 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
673
DLLAPD INFO <0016> lapd_core.c:1888 ((0:10-T3-S0)) msg-len 25 sent 25 left 0 N201 260 length 0 first byte 10
674
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 0c 11 01 80 1e 04 27 17 31 06 1c 09 f1 07 00 01 4e 00 e5 04 00 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 
675
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
676
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 31
677
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
678
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
679
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 31 sent 0 left 31 N201 260 length 31 first byte 0c
680
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=6
681
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
682
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
683
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 0c 0c 0c 11 01 80 1e 04 27 17 31 06 1c 09 f1 07 00 01 4e 00 e5 04 00 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 
684
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 31 sent 31 left 0 N201 260 length 0 first byte 0c
685
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
686
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 02 
687
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
688
DLLAPD INFO <0016> lapd_core.c:765 ((0:4-T1-S0)) ack frame 0
689
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
690
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
691
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
692
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
693
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 01 02 
694
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
695
DLLAPD INFO <0016> lapd_core.c:765 ((0:10-T3-S0)) ack frame 0
696
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
697
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
698
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
699
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
700
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 02 05 01 02 
701
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
702
DLLAPD INFO <0016> lapd_core.c:765 ((0:7-T2-S0)) ack frame 0
703
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S0)) stop T200
704
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
705
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
706
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
707
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 0e 
708
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
709
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 6
710
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
711
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
712
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
713
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(0) tei(0)
714
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 0c 0e 10 1c 1a 02 62 11 1c 11 01 80 
715
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T0-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
716
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T0-S0)) incrementing V(R) to 7
717
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
718
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
719
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T0-S0)) message in single I frame
720
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 10 1c 1a 02 62 11 1c 11 01 80  sapi=0 tei=0
721
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=0) discarding RSL message received in locked administrative state
722
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1672
723
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T0-S0)) we are not busy and have no pending data, send RR
724
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 0e 
725
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:4) TX: 10 1a 1e 0d 
726
DLLAPD INFO <0016> lapd_core.c:2233 ((0:4-T1-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
727
DLLAPD INFO <0016> lapd_core.c:1816 ((0:4-T1-S0)) writing message to send-queue: l3len: 4
728
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1822
729
DLLAPD INFO <0016> lapd_core.c:1877 ((0:4-T1-S0)) get message from send-queue
730
DLLAPD INFO <0016> lapd_core.c:1888 ((0:4-T1-S0)) msg-len 4 sent 0 left 4 N201 260 length 4 first byte 10
731
DLLAPD INFO <0016> lapd_core.c:1897 ((0:4-T1-S0)) send I frame V(S)=1
732
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
733
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
734
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 02 00 10 1a 1e 0d 
735
DLLAPD INFO <0016> lapd_core.c:1888 ((0:4-T1-S0)) msg-len 4 sent 4 left 0 N201 260 length 0 first byte 10
736
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:7) TX: 10 1a 1e 0d 
737
DLLAPD INFO <0016> lapd_core.c:2233 ((0:7-T2-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
738
DLLAPD INFO <0016> lapd_core.c:1816 ((0:7-T2-S0)) writing message to send-queue: l3len: 4
739
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1822
740
DLLAPD INFO <0016> lapd_core.c:1877 ((0:7-T2-S0)) get message from send-queue
741
DLLAPD INFO <0016> lapd_core.c:1888 ((0:7-T2-S0)) msg-len 4 sent 0 left 4 N201 260 length 4 first byte 10
742
DLLAPD INFO <0016> lapd_core.c:1897 ((0:7-T2-S0)) send I frame V(S)=1
743
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
744
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
745
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 02 00 10 1a 1e 0d 
746
DLLAPD INFO <0016> lapd_core.c:1888 ((0:7-T2-S0)) msg-len 4 sent 4 left 0 N201 260 length 0 first byte 10
747
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:10) TX: 10 1a 1e 0d 
748
DLLAPD INFO <0016> lapd_core.c:2233 ((0:10-T3-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
749
DLLAPD INFO <0016> lapd_core.c:1816 ((0:10-T3-S0)) writing message to send-queue: l3len: 4
750
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1822
751
DLLAPD INFO <0016> lapd_core.c:1877 ((0:10-T3-S0)) get message from send-queue
752
DLLAPD INFO <0016> lapd_core.c:1888 ((0:10-T3-S0)) msg-len 4 sent 0 left 4 N201 260 length 4 first byte 10
753
DLLAPD INFO <0016> lapd_core.c:1897 ((0:10-T3-S0)) send I frame V(S)=1
754
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
755
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
756
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 02 00 10 1a 1e 0d 
757
DLLAPD INFO <0016> lapd_core.c:1888 ((0:10-T3-S0)) msg-len 4 sent 4 left 0 N201 260 length 0 first byte 10
758
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 10 1a 1e 05 0b 00 12 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
759
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
760
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 25
761
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
762
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
763
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 25 sent 0 left 25 N201 260 length 25 first byte 10
764
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=7
765
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
766
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
767
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 0e 0e 10 1a 1e 05 0b 00 12 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
768
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 25 sent 25 left 0 N201 260 length 0 first byte 10
769
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
770
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 04 
771
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
772
DLLAPD INFO <0016> lapd_core.c:765 ((0:4-T1-S0)) ack frame 1
773
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
774
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
775
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
776
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
777
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 02 05 01 04 
778
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
779
DLLAPD INFO <0016> lapd_core.c:765 ((0:7-T2-S0)) ack frame 1
780
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S0)) stop T200
781
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
782
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
783
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
784
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 01 04 
785
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
786
DLLAPD INFO <0016> lapd_core.c:765 ((0:10-T3-S0)) ack frame 1
787
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
788
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
789
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
790
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
791
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 10 
792
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
793
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 7
794
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
795
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
796
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
797
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:4) TX: 10 1a 1e 0e 
798
DLLAPD INFO <0016> lapd_core.c:2233 ((0:4-T1-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
799
DLLAPD INFO <0016> lapd_core.c:1816 ((0:4-T1-S0)) writing message to send-queue: l3len: 4
800
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1822
801
DLLAPD INFO <0016> lapd_core.c:1877 ((0:4-T1-S0)) get message from send-queue
802
DLLAPD INFO <0016> lapd_core.c:1888 ((0:4-T1-S0)) msg-len 4 sent 0 left 4 N201 260 length 4 first byte 10
803
DLLAPD INFO <0016> lapd_core.c:1897 ((0:4-T1-S0)) send I frame V(S)=2
804
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
805
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
806
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 04 00 10 1a 1e 0e 
807
DLLAPD INFO <0016> lapd_core.c:1888 ((0:4-T1-S0)) msg-len 4 sent 4 left 0 N201 260 length 0 first byte 10
808
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:7) TX: 10 1a 1e 0e 
809
DLLAPD INFO <0016> lapd_core.c:2233 ((0:7-T2-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
810
DLLAPD INFO <0016> lapd_core.c:1816 ((0:7-T2-S0)) writing message to send-queue: l3len: 4
811
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1822
812
DLLAPD INFO <0016> lapd_core.c:1877 ((0:7-T2-S0)) get message from send-queue
813
DLLAPD INFO <0016> lapd_core.c:1888 ((0:7-T2-S0)) msg-len 4 sent 0 left 4 N201 260 length 4 first byte 10
814
DLLAPD INFO <0016> lapd_core.c:1897 ((0:7-T2-S0)) send I frame V(S)=2
815
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
816
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
817
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 04 00 10 1a 1e 0e 
818
DLLAPD INFO <0016> lapd_core.c:1888 ((0:7-T2-S0)) msg-len 4 sent 4 left 0 N201 260 length 0 first byte 10
819
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:10) TX: 10 1a 1e 0e 
820
DLLAPD INFO <0016> lapd_core.c:2233 ((0:10-T3-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
821
DLLAPD INFO <0016> lapd_core.c:1816 ((0:10-T3-S0)) writing message to send-queue: l3len: 4
822
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1822
823
DLLAPD INFO <0016> lapd_core.c:1877 ((0:10-T3-S0)) get message from send-queue
824
DLLAPD INFO <0016> lapd_core.c:1888 ((0:10-T3-S0)) msg-len 4 sent 0 left 4 N201 260 length 4 first byte 10
825
DLLAPD INFO <0016> lapd_core.c:1897 ((0:10-T3-S0)) send I frame V(S)=2
826
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
827
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
828
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 04 00 10 1a 1e 0e 
829
DLLAPD INFO <0016> lapd_core.c:1888 ((0:10-T3-S0)) msg-len 4 sent 4 left 0 N201 260 length 0 first byte 10
830
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 10 1a 1e 0d 
831
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
832
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 4
833
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
834
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
835
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 4 sent 0 left 4 N201 260 length 4 first byte 10
836
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=8
837
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
838
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
839
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 10 0e 10 1a 1e 0d 
840
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 4 sent 4 left 0 N201 260 length 0 first byte 10
841
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
842
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 06 
843
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
844
DLLAPD INFO <0016> lapd_core.c:765 ((0:4-T1-S0)) ack frame 2
845
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
846
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
847
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
848
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
849
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 02 05 01 06 
850
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
851
DLLAPD INFO <0016> lapd_core.c:765 ((0:7-T2-S0)) ack frame 2
852
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S0)) stop T200
853
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
854
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
855
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
856
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 01 06 
857
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
858
DLLAPD INFO <0016> lapd_core.c:765 ((0:10-T3-S0)) ack frame 2
859
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
860
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
861
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
862
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
863
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 12 
864
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
865
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 8
866
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
867
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
868
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
869
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 11, sapi(0) tei(1)
870
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 00 06 10 1c 1a 01 3f 1c 1a 
871
DLLAPD INFO <0016> lapd_core.c:1520 ((0:4-T1-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
872
DLLAPD INFO <0016> lapd_core.c:1606 ((0:4-T1-S0)) incrementing V(R) to 1
873
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
874
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
875
DLLAPD INFO <0016> lapd_core.c:1615 ((0:4-T1-S0)) message in single I frame
876
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:4) RX: 10 1c 1a 01 3f 1c 1a  sapi=0 tei=1
877
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=1) discarding RSL message received in locked administrative state
878
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1672
879
DLLAPD INFO <0016> lapd_core.c:1681 ((0:4-T1-S0)) we are not busy and have no pending data, send RR
880
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 02 
881
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 11, sapi(0) tei(2)
882
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 00 06 10 1c 1a 01 3f 1c 1a 
883
DLLAPD INFO <0016> lapd_core.c:1520 ((0:7-T2-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
884
DLLAPD INFO <0016> lapd_core.c:1606 ((0:7-T2-S0)) incrementing V(R) to 1
885
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
886
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
887
DLLAPD INFO <0016> lapd_core.c:1615 ((0:7-T2-S0)) message in single I frame
888
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:7) RX: 10 1c 1a 01 3f 1c 1a  sapi=0 tei=2
889
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=2) discarding RSL message received in locked administrative state
890
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1672
891
DLLAPD INFO <0016> lapd_core.c:1681 ((0:7-T2-S0)) we are not busy and have no pending data, send RR
892
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 02 
893
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 11, sapi(0) tei(3)
894
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 00 06 10 1c 1a 01 3f 1c 1a 
895
DLLAPD INFO <0016> lapd_core.c:1520 ((0:10-T3-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
896
DLLAPD INFO <0016> lapd_core.c:1606 ((0:10-T3-S0)) incrementing V(R) to 1
897
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
898
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
899
DLLAPD INFO <0016> lapd_core.c:1615 ((0:10-T3-S0)) message in single I frame
900
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:10) RX: 10 1c 1a 01 3f 1c 1a  sapi=0 tei=3
901
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=3) discarding RSL message received in locked administrative state
902
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1672
903
DLLAPD INFO <0016> lapd_core.c:1681 ((0:10-T3-S0)) we are not busy and have no pending data, send RR
904
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 02 
905
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:4) TX: 10 1a 1e 06 0b 00 0c 06 1e 00 00 09 f1 07 00 01 27 ff 2b 
906
DLLAPD INFO <0016> lapd_core.c:2233 ((0:4-T1-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
907
DLLAPD INFO <0016> lapd_core.c:1816 ((0:4-T1-S0)) writing message to send-queue: l3len: 19
908
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1822
909
DLLAPD INFO <0016> lapd_core.c:1877 ((0:4-T1-S0)) get message from send-queue
910
DLLAPD INFO <0016> lapd_core.c:1888 ((0:4-T1-S0)) msg-len 19 sent 0 left 19 N201 260 length 19 first byte 10
911
DLLAPD INFO <0016> lapd_core.c:1897 ((0:4-T1-S0)) send I frame V(S)=3
912
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
913
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
914
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 06 02 10 1a 1e 06 0b 00 0c 06 1e 00 00 09 f1 07 00 01 27 ff 2b 
915
DLLAPD INFO <0016> lapd_core.c:1888 ((0:4-T1-S0)) msg-len 19 sent 19 left 0 N201 260 length 0 first byte 10
916
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:7) TX: 10 1a 1e 06 0b 00 0c 06 1e 00 00 09 f1 07 00 01 27 ff 2b 
917
DLLAPD INFO <0016> lapd_core.c:2233 ((0:7-T2-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
918
DLLAPD INFO <0016> lapd_core.c:1816 ((0:7-T2-S0)) writing message to send-queue: l3len: 19
919
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1822
920
DLLAPD INFO <0016> lapd_core.c:1877 ((0:7-T2-S0)) get message from send-queue
921
DLLAPD INFO <0016> lapd_core.c:1888 ((0:7-T2-S0)) msg-len 19 sent 0 left 19 N201 260 length 19 first byte 10
922
DLLAPD INFO <0016> lapd_core.c:1897 ((0:7-T2-S0)) send I frame V(S)=3
923
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
924
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
925
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 06 02 10 1a 1e 06 0b 00 0c 06 1e 00 00 09 f1 07 00 01 27 ff 2b 
926
DLLAPD INFO <0016> lapd_core.c:1888 ((0:7-T2-S0)) msg-len 19 sent 19 left 0 N201 260 length 0 first byte 10
927
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:10) TX: 10 1a 1e 06 0b 00 0c 06 1e 00 00 09 f1 07 00 01 27 ff 2b 
928
DLLAPD INFO <0016> lapd_core.c:2233 ((0:10-T3-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
929
DLLAPD INFO <0016> lapd_core.c:1816 ((0:10-T3-S0)) writing message to send-queue: l3len: 19
930
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1822
931
DLLAPD INFO <0016> lapd_core.c:1877 ((0:10-T3-S0)) get message from send-queue
932
DLLAPD INFO <0016> lapd_core.c:1888 ((0:10-T3-S0)) msg-len 19 sent 0 left 19 N201 260 length 19 first byte 10
933
DLLAPD INFO <0016> lapd_core.c:1897 ((0:10-T3-S0)) send I frame V(S)=3
934
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
935
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
936
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 06 02 10 1a 1e 06 0b 00 0c 06 1e 00 00 09 f1 07 00 01 27 ff 2b 
937
DLLAPD INFO <0016> lapd_core.c:1888 ((0:10-T3-S0)) msg-len 19 sent 19 left 0 N201 260 length 0 first byte 10
938
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 10 1a 1e 0e 
939
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
940
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 4
941
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
942
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
943
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 4 sent 0 left 4 N201 260 length 4 first byte 10
944
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=9
945
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
946
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
947
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 12 0e 10 1a 1e 0e 
948
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 4 sent 4 left 0 N201 260 length 0 first byte 10
949
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
950
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 14 
951
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
952
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 9
953
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
954
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
955
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
956
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
957
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 08 
958
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
959
DLLAPD INFO <0016> lapd_core.c:765 ((0:4-T1-S0)) ack frame 3
960
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
961
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
962
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
963
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
964
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 02 05 01 08 
965
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
966
DLLAPD INFO <0016> lapd_core.c:765 ((0:7-T2-S0)) ack frame 3
967
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S0)) stop T200
968
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
969
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
970
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 11, sapi(0) tei(0)
971
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 0e 14 10 1c 1a 01 3f 1c 1a 
972
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T0-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
973
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T0-S0)) incrementing V(R) to 8
974
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
975
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
976
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T0-S0)) message in single I frame
977
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 10 1c 1a 01 3f 1c 1a  sapi=0 tei=0
978
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=0) discarding RSL message received in locked administrative state
979
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1672
980
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T0-S0)) we are not busy and have no pending data, send RR
981
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 10 
982
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
983
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 01 08 
984
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
985
DLLAPD INFO <0016> lapd_core.c:765 ((0:10-T3-S0)) ack frame 3
986
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
987
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
988
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
989
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 10 1a 1e 06 0b 00 0c 06 1e 00 00 09 f1 07 00 01 27 ff 2b 
990
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
991
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 19
992
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
993
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
994
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 19 sent 0 left 19 N201 260 length 19 first byte 10
995
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=10
996
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
997
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
998
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 14 10 10 1a 1e 06 0b 00 0c 06 1e 00 00 09 f1 07 00 01 27 ff 2b 
999
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 19 sent 19 left 0 N201 260 length 0 first byte 10
1000
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
1001
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 16 
1002
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
1003
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 10
1004
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
1005
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
1006
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
1007
DLLAPD INFO <0016> lapd_core.c:594 ((0:1-T62-S62)) Timeout T200 state=LAPD_STATE_SABM_SENT
1008
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 7f 
1009
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
1010
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 3, sapi(62) tei(62)
1011
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 73 
1012
DLLAPD INFO <0016> lapd_core.c:1170 ((0:1-T62-S62)) UA received in state LAPD_STATE_SABM_SENT
1013
DLLAPD INFO <0016> lapd_core.c:1224 ((0:1-T62-S62)) UA in SABM state
1014
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
1015
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
1016
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1017
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1250
1018
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:1-T62-S62)) LAPD DL-ESTABLISH confirm TEI=62 SAPI=62
1019
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:1) DL_EST: sapi(62) tei(62)
1020
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
1021
DNM NOTICE <0004> bts_ericsson_rbs2000.c:40 bootstrapping OML for BTS 0
1022
DNM DEBUG <0004> fsm.c:461 OM2000-BTS(0)[0x556b6667de60]{INIT}: Allocated
1023
DNM DEBUG <0004> abis_om2000.c:2569 OM2000-BTS(0)[0x556b6667de60]{INIT}: Received Event START
1024
DNM DEBUG <0004> abis_om2000.c:2362 OM2000-BTS(0)[0x556b6667de60]{INIT}: state_chg to WAIT-CF
1025
DNM DEBUG <0004> fsm.c:461 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{INIT}: Allocated
1026
DNM DEBUG <0004> abis_om2000.c:66 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{INIT}: is child of OM2000-BTS(0)[0x556b6667de60]
1027
DNM DEBUG <0004> abis_om2000.c:2020 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{INIT}: Received Event START
1028
DNM DEBUG <0004> abis_om2000.c:1680 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{INIT}: state_chg to WAIT-START-ACCEPT
1029
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=CF/00/ff/00 Start Request
1030
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
1031
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
1032
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
1033
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
1034
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
1035
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
1036
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 84 0a 00 ff 00 
1037
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
1038
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
1039
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
1040
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
1041
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
1042
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=0
1043
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1044
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
1045
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 00 00 80 80 00 06 00 84 0a 00 ff 00 
1046
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=1 V(A)=0)
1047
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 76, sapi(62) tei(62)
1048
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 00 00 80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 40 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00 
1049
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
1050
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 1
1051
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
1052
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 40 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00  sapi=62 tei=62
1053
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=CF/00/ff/00 Fault Report (80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 40 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00 )
1054
DNM DEBUG <0004> abis_om2000.c:2740 Rx MO=CF/00/ff/00 Fault Report, MO State: STARTED
1055
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Internal Fault Map Class 2A (25,43)
1056
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: External Condition Map Class 2 (6)
1057
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Replacement Unit Map (0,7,34)
1058
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Internal Fault Map Class 2A Extension (5,10,21,41)
1059
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Replacement Unit Map Extension (13)
1060
DNM ERROR <0004> abis_om2000.c:2848 Rx MO=CF/00/ff/00 Fault Report: invalid tlv element!
1061
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=CF/00/ff/00 Fault Report ACK
1062
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
1063
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=1 V(A)=0)
1064
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
1065
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 02 
1066
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1067
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 02 
1068
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
1069
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 0
1070
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
1071
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1072
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1073
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
1074
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(62) tei(62)
1075
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 02 02 80 80 00 06 00 86 0a 00 ff 00 
1076
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
1077
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 2
1078
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1079
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1080
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
1081
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 06 00 86 0a 00 ff 00  sapi=62 tei=62
1082
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=CF/00/ff/00 Start Request Accept (80 80 00 06 00 86 0a 00 ff 00 )
1083
DNM DEBUG <0004> abis_om2000.c:2044 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{WAIT-START-ACCEPT}: Received Event RX-RESET-REQ-ACCEPT
1084
DNM DEBUG <0004> abis_om2000.c:1735 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{WAIT-START-ACCEPT}: state_chg to WAIT-START-RES
1085
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
1086
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
1087
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 04 
1088
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 40 0a 00 ff 00 
1089
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
1090
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
1091
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
1092
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
1093
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
1094
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=1
1095
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1096
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
1097
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 02 04 80 80 00 06 00 40 0a 00 ff 00 
1098
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=2 V(A)=1)
1099
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1100
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 04 
1101
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
1102
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 1
1103
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
1104
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1105
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1106
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
1107
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 69, sapi(62) tei(62)
1108
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 04 04 80 80 00 3d 01 06 0a 00 ff 00 90 35 02 04 00 47 31 32 52 31 30 47 31 32 52 31 31 47 31 32 52 31 32 47 31 32 52 31 33 04 01 47 30 31 52 31 32 47 30 31 52 31 33 47 30 31 52 31 34 47 30 31 52 31 35 
1109
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
1110
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 3
1111
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1112
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1113
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
1114
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 3d 01 06 0a 00 ff 00 90 35 02 04 00 47 31 32 52 31 30 47 31 32 52 31 31 47 31 32 52 31 32 47 31 32 52 31 33 04 01 47 30 31 52 31 32 47 30 31 52 31 33 47 30 31 52 31 34 47 30 31 52 31 35  sapi=62 tei=62
1115
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=CF/00/ff/00 Negotiation Request (80 80 00 3d 01 06 0a 00 ff 00 90 35 02 04 00 47 31 32 52 31 30 47 31 32 52 31 31 47 31 32 52 31 32 47 31 32 52 31 33 04 01 47 30 31 52 31 32 47 30 31 52 31 33 47 30 31 52 31 34 47 30 31 52 31 35 )
1116
DNM DEBUG <0004> abis_om2000.c:2639 	IWD Type 0 Gen G12 Rev R10
1117
DNM DEBUG <0004> abis_om2000.c:2639 	IWD Type 0 Gen G12 Rev R11
1118
DNM DEBUG <0004> abis_om2000.c:2639 	IWD Type 0 Gen G12 Rev R12
1119
DNM DEBUG <0004> abis_om2000.c:2639 	IWD Type 0 Gen G12 Rev R13
1120
DNM DEBUG <0004> abis_om2000.c:2639 	IWD Type 1 Gen G01 Rev R12
1121
DNM DEBUG <0004> abis_om2000.c:2639 	IWD Type 1 Gen G01 Rev R13
1122
DNM DEBUG <0004> abis_om2000.c:2639 	IWD Type 1 Gen G01 Rev R14
1123
DNM DEBUG <0004> abis_om2000.c:2639 	IWD Type 1 Gen G01 Rev R15
1124
DNM DEBUG <0004> abis_om2000.c:2591 Tx MO=CF/00/ff/00 Negotiation Request ACK
1125
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
1126
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
1127
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 06 
1128
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 17 01 04 0a 00 ff 00 91 0f 02 00 47 31 32 52 31 30 01 47 30 31 52 31 35 
1129
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
1130
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 27
1131
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
1132
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
1133
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 27 sent 0 left 27 N201 260 length 27 first byte 80
1134
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=2
1135
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1136
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
1137
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 04 06 80 80 00 17 01 04 0a 00 ff 00 91 0f 02 00 47 31 32 52 31 30 01 47 30 31 52 31 35 
1138
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=3 V(A)=2)
1139
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1140
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 06 
1141
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
1142
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 2
1143
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
1144
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1145
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1146
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 27 sent 27 left 0 N201 260 length 0 first byte 80
1147
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 50, sapi(62) tei(62)
1148
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 06 06 80 80 00 2a 00 8a 0a 00 ff 00 2c 01 48 00 40 45 52 41 47 30 37 52 33 32 56 30 31 43 04 fe ff fe 74 44 01 ff 45 05 ff fb ff ff 07 46 01 ff 
1149
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
1150
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 4
1151
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1152
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1153
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
1154
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 2a 00 8a 0a 00 ff 00 2c 01 48 00 40 45 52 41 47 30 37 52 33 32 56 30 31 43 04 fe ff fe 74 44 01 ff 45 05 ff fb ff ff 07 46 01 ff  sapi=62 tei=62
1155
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=CF/00/ff/00 Start Result (80 80 00 2a 00 8a 0a 00 ff 00 2c 01 48 00 40 45 52 41 47 30 37 52 33 32 56 30 31 43 04 fe ff fe 74 44 01 ff 45 05 ff fb ff ff 07 46 01 ff )
1156
DNM DEBUG <0004> abis_om2000.c:2740 Rx MO=CF/00/ff/00 Start Result, MO State: STARTED
1157
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=CF/00/ff/00 Start Result ACK
1158
DNM DEBUG <0004> abis_om2000.c:2049 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{WAIT-START-RES}: Received Event RX-START-RESULT
1159
DNM DEBUG <0004> abis_om2000.c:1753 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{WAIT-START-RES}: state_chg to WAIT-OPINFO-ACCEPT
1160
DNM DEBUG <0004> abis_om2000.c:1172 Tx MO=CF/00/ff/00 Operational Information
1161
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
1162
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
1163
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 08 
1164
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 88 0a 00 ff 00 
1165
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
1166
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
1167
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
1168
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
1169
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
1170
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=3
1171
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1172
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
1173
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 06 08 80 80 00 06 00 88 0a 00 ff 00 
1174
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=4 V(A)=3)
1175
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1176
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 08 
1177
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
1178
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 3
1179
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
1180
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1181
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1182
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
1183
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 76, sapi(62) tei(62)
1184
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 08 08 80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 40 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00 
1185
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
1186
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 5
1187
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1188
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1189
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
1190
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 40 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00  sapi=62 tei=62
1191
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=CF/00/ff/00 Fault Report (80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 40 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00 )
1192
DNM DEBUG <0004> abis_om2000.c:2740 Rx MO=CF/00/ff/00 Fault Report, MO State: STARTED
1193
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Internal Fault Map Class 2A (25,43)
1194
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: External Condition Map Class 2 (6)
1195
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Replacement Unit Map (0,7,34)
1196
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Internal Fault Map Class 2A Extension (5,10,21,41)
1197
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Replacement Unit Map Extension (13)
1198
DNM ERROR <0004> abis_om2000.c:2848 Rx MO=CF/00/ff/00 Fault Report: invalid tlv element!
1199
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=CF/00/ff/00 Fault Report ACK
1200
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
1201
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
1202
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 0a 
1203
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 08 00 74 0a 00 ff 00 2e 01 
1204
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
1205
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 12
1206
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
1207
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
1208
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 12 sent 0 left 12 N201 260 length 12 first byte 80
1209
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=4
1210
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1211
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
1212
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 08 0a 80 80 00 08 00 74 0a 00 ff 00 2e 01 
1213
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=5 V(A)=4)
1214
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1215
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 0a 
1216
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
1217
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 4
1218
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
1219
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1220
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1221
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 12 sent 12 left 0 N201 260 length 0 first byte 80
1222
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(62) tei(62)
1223
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 0a 0a 80 80 00 06 00 76 0a 00 ff 00 
1224
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
1225
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 6
1226
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1227
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1228
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
1229
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 06 00 76 0a 00 ff 00  sapi=62 tei=62
1230
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=CF/00/ff/00 Operational Information Accept (80 80 00 06 00 76 0a 00 ff 00 )
1231
DNM DEBUG <0004> abis_om2000.c:2087 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{WAIT-OPINFO-ACCEPT}: Received Event RX-OPINFO-ACCEPT
1232
DNM DEBUG <0004> abis_om2000.c:1865 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{WAIT-OPINFO-ACCEPT}: state_chg to DONE
1233
DNM DEBUG <0004> abis_om2000.c:1872 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
1234
DNM DEBUG <0004> abis_om2000.c:1872 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{DONE}: Removing from parent OM2000-BTS(0)[0x556b6667de60]
1235
DNM DEBUG <0004> abis_om2000.c:1872 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{DONE}: Freeing instance
1236
DNM DEBUG <0004> fsm.c:573 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{DONE}: Deallocated
1237
DNM DEBUG <0004> abis_om2000.c:1872 OM2000-BTS(0)[0x556b6667de60]{WAIT-CF}: Received Event CF-DONE
1238
DNM DEBUG <0004> abis_om2000.c:2374 OM2000-BTS(0)[0x556b6667de60]{WAIT-CF}: state_chg to WAIT-TF
1239
DNM DEBUG <0004> fsm.c:461 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{INIT}: Allocated
1240
DNM DEBUG <0004> abis_om2000.c:66 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{INIT}: is child of OM2000-BTS(0)[0x556b6667de60]
1241
DNM DEBUG <0004> abis_om2000.c:2020 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{INIT}: Received Event START
1242
DNM DEBUG <0004> abis_om2000.c:1692 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{INIT}: state_chg to WAIT-CONN-COMPL
1243
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=TF/00/ff/00 Connect Command
1244
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
1245
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
1246
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 0c 
1247
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 40 0a 00 ff 00 
1248
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
1249
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
1250
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
1251
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
1252
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
1253
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=5
1254
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1255
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
1256
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 0a 0c 80 80 00 06 00 40 0a 00 ff 00 
1257
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=6 V(A)=5)
1258
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1259
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 0c 
1260
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
1261
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 5
1262
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
1263
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1264
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1265
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
1266
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 1c 04 00 ff 00 
1267
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
1268
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
1269
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
1270
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
1271
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
1272
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=6
1273
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1274
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
1275
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 0c 0c 80 80 00 06 00 1c 04 00 ff 00 
1276
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=7 V(A)=6)
1277
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1278
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 0e 
1279
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
1280
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 6
1281
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
1282
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1283
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1284
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
1285
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(62) tei(62)
1286
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 0c 0e 80 80 00 06 00 1e 04 00 ff 00 
1287
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
1288
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 7
1289
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1290
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1291
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
1292
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 06 00 1e 04 00 ff 00  sapi=62 tei=62
1293
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=TF/00/ff/00 Connect Complete (80 80 00 06 00 1e 04 00 ff 00 )
1294
DNM DEBUG <0004> abis_om2000.c:2032 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-CONN-COMPL}: Received Event RX-CONN-COMPL
1295
DNM DEBUG <0004> abis_om2000.c:1713 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-CONN-COMPL}: state_chg to WAIT-RES-COMPL
1296
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=TF/00/ff/00 Reset Command
1297
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
1298
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
1299
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 0e 
1300
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 78 04 00 ff 00 
1301
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
1302
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
1303
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
1304
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
1305
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
1306
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=7
1307
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1308
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
1309
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 0e 0e 80 80 00 06 00 78 04 00 ff 00 
1310
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=8 V(A)=7)
1311
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1312
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 10 
1313
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
1314
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 7
1315
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
1316
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1317
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1318
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
1319
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(62) tei(62)
1320
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 0e 10 80 80 00 06 00 7a 04 00 ff 00 
1321
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
1322
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 8
1323
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1324
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1325
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
1326
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 06 00 7a 04 00 ff 00  sapi=62 tei=62
1327
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=TF/00/ff/00 Reset Complete (80 80 00 06 00 7a 04 00 ff 00 )
1328
DNM DEBUG <0004> abis_om2000.c:2038 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-RES-COMPL}: Received Event RX-RESET-COMPL
1329
DNM DEBUG <0004> abis_om2000.c:1724 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-RES-COMPL}: state_chg to WAIT-START-ACCEPT
1330
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=TF/00/ff/00 Start Request
1331
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
1332
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
1333
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 10 
1334
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 84 04 00 ff 00 
1335
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
1336
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
1337
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
1338
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
1339
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
1340
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=8
1341
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1342
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
1343
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 10 10 80 80 00 06 00 84 04 00 ff 00 
1344
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=9 V(A)=8)
1345
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1346
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 12 
1347
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
1348
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 8
1349
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
1350
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1351
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1352
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
1353
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(62) tei(62)
1354
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 10 12 80 80 00 06 00 86 04 00 ff 00 
1355
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
1356
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 9
1357
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1358
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1359
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
1360
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 06 00 86 04 00 ff 00  sapi=62 tei=62
1361
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=TF/00/ff/00 Start Request Accept (80 80 00 06 00 86 04 00 ff 00 )
1362
DNM DEBUG <0004> abis_om2000.c:2044 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-START-ACCEPT}: Received Event RX-RESET-REQ-ACCEPT
1363
DNM DEBUG <0004> abis_om2000.c:1735 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-START-ACCEPT}: state_chg to WAIT-START-RES
1364
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
1365
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
1366
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 12 
1367
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 16, sapi(62) tei(62)
1368
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 12 12 80 80 00 08 00 8a 04 00 ff 00 2c 03 
1369
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
1370
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 10
1371
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1372
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1373
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
1374
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 08 00 8a 04 00 ff 00 2c 03  sapi=62 tei=62
1375
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=TF/00/ff/00 Start Result (80 80 00 08 00 8a 04 00 ff 00 2c 03 )
1376
DNM DEBUG <0004> abis_om2000.c:2740 Rx MO=TF/00/ff/00 Start Result, MO State: DISABLED
1377
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=TF/00/ff/00 Start Result ACK
1378
DNM DEBUG <0004> abis_om2000.c:2049 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-START-RES}: Received Event RX-START-RESULT
1379
DNM DEBUG <0004> abis_om2000.c:1773 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-START-RES}: state_chg to WAIT-CFG-ACCEPT
1380
DNM DEBUG <0004> abis_om2000.c:1413 Tx MO=TF/00/ff/00 TF Configuration Request
1381
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
1382
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
1383
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 14 
1384
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 88 04 00 ff 00 
1385
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
1386
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
1387
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
1388
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
1389
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
1390
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=9
1391
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1392
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
1393
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 12 14 80 80 00 06 00 88 04 00 ff 00 
1394
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=10 V(A)=9)
1395
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1396
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 14 
1397
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
1398
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 9
1399
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
1400
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1401
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1402
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
1403
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 10 00 a0 04 00 ff 00 3a 01 86 00 98 ff ff ff ff ff 
1404
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
1405
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 20
1406
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
1407
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
1408
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 20 sent 0 left 20 N201 260 length 20 first byte 80
1409
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=10
1410
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1411
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
1412
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 14 14 80 80 00 10 00 a0 04 00 ff 00 3a 01 86 00 98 ff ff ff ff ff 
1413
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=11 V(A)=10)
1414
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1415
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 16 
1416
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
1417
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 10
1418
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
1419
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1420
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1421
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 20 sent 20 left 0 N201 260 length 0 first byte 80
1422
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(62) tei(62)
1423
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 14 16 80 80 00 06 00 a2 04 00 ff 00 
1424
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
1425
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 11
1426
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1427
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1428
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
1429
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 06 00 a2 04 00 ff 00  sapi=62 tei=62
1430
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=TF/00/ff/00 TF Configuration Request Accept (80 80 00 06 00 a2 04 00 ff 00 )
1431
DNM DEBUG <0004> abis_om2000.c:2060 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-CFG-ACCEPT}: Received Event RX-CFG-REQ-ACCEPT
1432
DNM DEBUG <0004> abis_om2000.c:1808 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-CFG-ACCEPT}: state_chg to WAIT-CFG-RES
1433
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
1434
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
1435
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 16 
1436
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(62) tei(62)
1437
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 16 16 80 80 00 06 00 12 0a 00 ff 00 
1438
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
1439
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 12
1440
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1441
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1442
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
1443
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 06 00 12 0a 00 ff 00  sapi=62 tei=62
1444
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=CF/00/ff/00 Calendar Time Request (80 80 00 06 00 12 0a 00 ff 00 )
1445
DNM ERROR <0004> abis_om2000.c:3006 MO object should not generate any message. fsm == NULL Calendar Time Request: [L2]> 80 80 00 06 00 12 0a 00 ff 00 [L3]> 
1446
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
1447
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
1448
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 18 
1449
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 0d 00 10 0a 00 ff 00 0d 14 0b 0a 0f 1e 24 
1450
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
1451
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 17
1452
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
1453
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
1454
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 17 sent 0 left 17 N201 260 length 17 first byte 80
1455
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=11
1456
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1457
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
1458
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 16 18 80 80 00 0d 00 10 0a 00 ff 00 0d 14 0b 0a 0f 1e 24 
1459
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=12 V(A)=11)
1460
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1461
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 18 
1462
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
1463
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 11
1464
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
1465
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1466
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1467
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 17 sent 17 left 0 N201 260 length 0 first byte 80
1468
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
1469
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
1470
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
1471
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01 
1472
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
1473
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
1474
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
1475
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1476
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01 
1477
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
1478
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
1479
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01 
1480
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
1481
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
1482
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
1483
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1484
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01 
1485
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
1486
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
1487
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01 
1488
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
1489
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
1490
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
1491
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1492
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01 
1493
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
1494
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
1495
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01 
1496
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
1497
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
1498
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
1499
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1500
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01 
1501
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
1502
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
1503
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09 
1504
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
1505
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
1506
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
1507
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1508
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03 
1509
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
1510
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
1511
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09 
1512
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
1513
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
1514
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
1515
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1516
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03 
1517
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
1518
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
1519
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09 
1520
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
1521
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
1522
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
1523
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1524
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03 
1525
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
1526
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
1527
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17 
1528
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
1529
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
1530
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
1531
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1532
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11 
1533
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
1534
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
1535
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
1536
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
1537
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 19 
1538
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
1539
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1540
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 19 
1541
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
1542
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
1543
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
1544
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
1545
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1546
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1547
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1548
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 19 
1549
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
1550
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1551
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1552
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1553
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 19 
1554
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1555
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
1556
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
1557
DLLAPD INFO <0016> lapd_core.c:719 ((0:7-T2-S62)) Timeout T203 state=LAPD_STATE_MF_EST
1558
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
1559
DLLAPD INFO <0016> lapd_core.c:732 ((0:7-T2-S62)) transmit an RR poll command
1560
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: fa 05 01 01 
1561
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S62)) start T200 (timeout=0.300000s)
1562
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
1563
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01 
1564
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_TIMER_RECOV
1565
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1566
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01 
1567
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
1568
DLLAPD INFO <0016> lapd_core.c:1849 ((0:7-T2-S62)) timer recovery, not sending
1569
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T0-S62)) Timeout T203 state=LAPD_STATE_MF_EST
1570
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
1571
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T0-S62)) transmit an RR poll command
1572
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: fa 01 01 01 
1573
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S62)) start T200 (timeout=0.300000s)
1574
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
1575
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01 
1576
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_TIMER_RECOV
1577
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1578
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01 
1579
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
1580
DLLAPD INFO <0016> lapd_core.c:1849 ((0:1-T0-S62)) timer recovery, not sending
1581
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
1582
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01 
1583
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
1584
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
1585
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
1586
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1587
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01 
1588
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
1589
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S62)) Timeout T203 state=LAPD_STATE_MF_EST
1590
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
1591
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S62)) transmit an RR poll command
1592
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: fa 03 01 01 
1593
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S62)) start T200 (timeout=0.300000s)
1594
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
1595
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01 
1596
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
1597
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1598
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01 
1599
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
1600
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S62)) timer recovery, not sending
1601
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
1602
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: fa 05 01 01 
1603
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_TIMER_RECOV
1604
DLLAPD INFO <0016> lapd_core.c:1364 ((0:7-T2-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
1605
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S62)) stop T200
1606
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
1607
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
1608
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
1609
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
1610
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 01 01 01 
1611
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_TIMER_RECOV
1612
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T0-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
1613
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S62)) stop T200
1614
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
1615
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
1616
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
1617
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
1618
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: fa 03 01 01 
1619
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
1620
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
1621
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S62)) stop T200
1622
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
1623
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
1624
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
1625
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
1626
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09 
1627
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
1628
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
1629
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
1630
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1631
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03 
1632
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
1633
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
1634
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09 
1635
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
1636
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
1637
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
1638
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1639
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03 
1640
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
1641
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S0)) Timeout T203 state=LAPD_STATE_MF_EST
1642
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
1643
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S0)) transmit an RR poll command
1644
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 01 03 
1645
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
1646
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
1647
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09 
1648
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
1649
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1650
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03 
1651
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
1652
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S0)) timer recovery, not sending
1653
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
1654
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 09 
1655
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
1656
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
1657
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
1658
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
1659
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
1660
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
1661
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
1662
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17 
1663
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
1664
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
1665
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
1666
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1667
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11 
1668
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
1669
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
1670
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
1671
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
1672
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 19 
1673
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
1674
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1675
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 19 
1676
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
1677
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
1678
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
1679
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
1680
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1681
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1682
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1683
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 19 
1684
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
1685
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1686
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1687
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1688
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 19 
1689
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1690
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
1691
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
1692
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
1693
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01 
1694
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
1695
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
1696
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
1697
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1698
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01 
1699
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
1700
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
1701
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01 
1702
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
1703
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
1704
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
1705
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1706
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01 
1707
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
1708
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S62)) Timeout T203 state=LAPD_STATE_MF_EST
1709
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
1710
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S62)) transmit an RR poll command
1711
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: fa 07 01 01 
1712
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S62)) start T200 (timeout=0.300000s)
1713
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
1714
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01 
1715
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
1716
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1717
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01 
1718
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
1719
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S62)) timer recovery, not sending
1720
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
1721
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01 
1722
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
1723
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
1724
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
1725
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1726
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01 
1727
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
1728
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
1729
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: fa 07 01 01 
1730
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
1731
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
1732
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S62)) stop T200
1733
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
1734
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
1735
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
1736
DLLAPD INFO <0016> lapd_core.c:719 ((0:7-T2-S0)) Timeout T203 state=LAPD_STATE_MF_EST
1737
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
1738
DLLAPD INFO <0016> lapd_core.c:732 ((0:7-T2-S0)) transmit an RR poll command
1739
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 01 03 
1740
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
1741
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
1742
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09 
1743
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_TIMER_RECOV
1744
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1745
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03 
1746
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
1747
DLLAPD INFO <0016> lapd_core.c:1849 ((0:7-T2-S0)) timer recovery, not sending
1748
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S0)) Timeout T203 state=LAPD_STATE_MF_EST
1749
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
1750
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S0)) transmit an RR poll command
1751
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 01 03 
1752
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
1753
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
1754
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09 
1755
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_TIMER_RECOV
1756
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1757
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03 
1758
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
1759
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S0)) timer recovery, not sending
1760
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
1761
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09 
1762
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
1763
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
1764
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
1765
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1766
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03 
1767
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
1768
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
1769
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 02 05 01 09 
1770
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_TIMER_RECOV
1771
DLLAPD INFO <0016> lapd_core.c:1364 ((0:7-T2-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
1772
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S0)) stop T200
1773
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
1774
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
1775
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
1776
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
1777
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 01 09 
1778
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_TIMER_RECOV
1779
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
1780
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
1781
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
1782
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
1783
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
1784
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
1785
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17 
1786
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
1787
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
1788
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
1789
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1790
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11 
1791
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
1792
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
1793
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
1794
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
1795
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 19 
1796
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
1797
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1798
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 19 
1799
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
1800
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
1801
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
1802
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
1803
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1804
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1805
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1806
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 19 
1807
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
1808
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1809
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1810
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1811
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 19 
1812
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1813
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
1814
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
1815
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
1816
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01 
1817
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
1818
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
1819
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
1820
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1821
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01 
1822
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
1823
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
1824
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01 
1825
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
1826
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
1827
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
1828
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1829
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01 
1830
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
1831
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
1832
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01 
1833
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
1834
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
1835
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
1836
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1837
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01 
1838
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
1839
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
1840
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01 
1841
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
1842
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
1843
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
1844
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1845
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01 
1846
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
1847
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
1848
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09 
1849
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
1850
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
1851
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
1852
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1853
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03 
1854
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
1855
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
1856
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09 
1857
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
1858
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
1859
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
1860
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1861
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03 
1862
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
1863
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
1864
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09 
1865
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
1866
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
1867
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
1868
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1869
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03 
1870
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
1871
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T0-S0)) Timeout T203 state=LAPD_STATE_MF_EST
1872
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
1873
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T0-S0)) transmit an RR poll command
1874
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 01 11 
1875
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
1876
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
1877
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17 
1878
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_TIMER_RECOV
1879
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1880
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11 
1881
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
1882
DLLAPD INFO <0016> lapd_core.c:1849 ((0:1-T0-S0)) timer recovery, not sending
1883
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
1884
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 17 
1885
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_TIMER_RECOV
1886
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T0-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
1887
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
1888
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
1889
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
1890
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
1891
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
1892
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
1893
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
1894
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 19 
1895
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
1896
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1897
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 19 
1898
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
1899
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
1900
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
1901
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
1902
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1903
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1904
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
1905
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 19 
1906
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
1907
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1908
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1909
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1910
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 19 
1911
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
1912
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
1913
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
1914
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
1915
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01 
1916
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
1917
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
1918
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
1919
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1920
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01 
1921
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
1922
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
1923
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01 
1924
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
1925
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
1926
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
1927
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1928
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01 
1929
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
1930
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
1931
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01 
1932
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
1933
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
1934
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
1935
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1936
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01 
1937
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
1938
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S62)) Timeout T203 state=LAPD_STATE_MF_EST
1939
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
1940
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S62)) transmit an RR poll command
1941
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: fa 03 01 01 
1942
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S62)) start T200 (timeout=0.300000s)
1943
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
1944
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01 
1945
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
1946
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1947
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01 
1948
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
1949
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S62)) timer recovery, not sending
1950
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
1951
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: fa 03 01 01 
1952
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
1953
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
1954
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S62)) stop T200
1955
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
1956
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
1957
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
1958
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
1959
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09 
1960
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
1961
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
1962
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
1963
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1964
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03 
1965
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
1966
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
1967
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09 
1968
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
1969
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
1970
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
1971
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1972
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03 
1973
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
1974
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
1975
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09 
1976
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
1977
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
1978
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
1979
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1980
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03 
1981
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
1982
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
1983
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17 
1984
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
1985
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
1986
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
1987
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
1988
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11 
1989
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
1990
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 76, sapi(62) tei(62)
1991
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 18 18 80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 00 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00 
1992
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
1993
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 13
1994
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
1995
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
1996
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
1997
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 00 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00  sapi=62 tei=62
1998
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=CF/00/ff/00 Fault Report (80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 00 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00 )
1999
DNM DEBUG <0004> abis_om2000.c:2740 Rx MO=CF/00/ff/00 Fault Report, MO State: STARTED
2000
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Internal Fault Map Class 2A (25,43)
2001
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Replacement Unit Map (0,7,34)
2002
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Internal Fault Map Class 2A Extension (5,10,21,41)
2003
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Replacement Unit Map Extension (13)
2004
DNM ERROR <0004> abis_om2000.c:2848 Rx MO=CF/00/ff/00 Fault Report: invalid tlv element!
2005
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=CF/00/ff/00 Fault Report ACK
2006
DNM ERROR <0004> abis_om2000.c:3006 MO object should not generate any message. fsm == NULL Fault Report: [L2]> 80 80 00 44 00 42 0a 00 ff 00 [L3]> 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 00 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00 
2007
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
2008
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
2009
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1a 
2010
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 40 0a 00 ff 00 
2011
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
2012
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
2013
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
2014
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
2015
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
2016
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=12
2017
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
2018
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
2019
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 18 1a 80 80 00 06 00 40 0a 00 ff 00 
2020
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=13 V(A)=12)
2021
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
2022
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1a 
2023
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
2024
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 12
2025
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
2026
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
2027
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
2028
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
2029
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
2030
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
2031
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
2032
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01 
2033
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
2034
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
2035
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
2036
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2037
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01 
2038
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
2039
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
2040
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01 
2041
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
2042
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
2043
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
2044
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2045
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01 
2046
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
2047
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2048
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2049
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S62)) transmit an RR poll command
2050
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: fa 07 01 01 
2051
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S62)) start T200 (timeout=0.300000s)
2052
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
2053
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01 
2054
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2055
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2056
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01 
2057
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
2058
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S62)) timer recovery, not sending
2059
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
2060
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01 
2061
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
2062
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
2063
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
2064
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2065
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01 
2066
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
2067
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
2068
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: fa 07 01 01 
2069
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2070
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2071
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S62)) stop T200
2072
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2073
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
2074
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
2075
DLLAPD INFO <0016> lapd_core.c:719 ((0:7-T2-S0)) Timeout T203 state=LAPD_STATE_MF_EST
2076
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2077
DLLAPD INFO <0016> lapd_core.c:732 ((0:7-T2-S0)) transmit an RR poll command
2078
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 01 03 
2079
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
2080
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
2081
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09 
2082
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2083
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2084
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03 
2085
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
2086
DLLAPD INFO <0016> lapd_core.c:1849 ((0:7-T2-S0)) timer recovery, not sending
2087
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S0)) Timeout T203 state=LAPD_STATE_MF_EST
2088
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2089
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S0)) transmit an RR poll command
2090
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 01 03 
2091
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
2092
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
2093
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09 
2094
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2095
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2096
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03 
2097
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
2098
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S0)) timer recovery, not sending
2099
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S0)) Timeout T203 state=LAPD_STATE_MF_EST
2100
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2101
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S0)) transmit an RR poll command
2102
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 01 03 
2103
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
2104
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
2105
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09 
2106
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2107
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2108
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03 
2109
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
2110
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S0)) timer recovery, not sending
2111
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
2112
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 02 05 01 09 
2113
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2114
DLLAPD INFO <0016> lapd_core.c:1364 ((0:7-T2-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
2115
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S0)) stop T200
2116
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2117
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
2118
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
2119
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
2120
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 01 09 
2121
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2122
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
2123
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
2124
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2125
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
2126
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
2127
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
2128
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 09 
2129
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2130
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
2131
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
2132
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2133
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
2134
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
2135
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
2136
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17 
2137
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
2138
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
2139
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
2140
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2141
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11 
2142
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
2143
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2144
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2145
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
2146
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b 
2147
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
2148
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
2149
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b 
2150
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2151
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2152
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
2153
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2154
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
2155
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
2156
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
2157
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b 
2158
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
2159
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
2160
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
2161
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2162
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b 
2163
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
2164
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
2165
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
2166
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
2167
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01 
2168
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
2169
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
2170
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
2171
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2172
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01 
2173
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
2174
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
2175
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01 
2176
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
2177
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
2178
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
2179
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2180
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01 
2181
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
2182
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
2183
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01 
2184
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
2185
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
2186
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
2187
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2188
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01 
2189
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
2190
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
2191
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01 
2192
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
2193
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
2194
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
2195
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2196
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01 
2197
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
2198
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
2199
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09 
2200
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
2201
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
2202
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
2203
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2204
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03 
2205
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
2206
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
2207
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09 
2208
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
2209
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
2210
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
2211
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2212
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03 
2213
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
2214
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
2215
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09 
2216
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
2217
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
2218
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
2219
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2220
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03 
2221
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
2222
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T0-S0)) Timeout T203 state=LAPD_STATE_MF_EST
2223
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2224
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T0-S0)) transmit an RR poll command
2225
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 01 11 
2226
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
2227
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
2228
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17 
2229
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2230
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2231
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11 
2232
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
2233
DLLAPD INFO <0016> lapd_core.c:1849 ((0:1-T0-S0)) timer recovery, not sending
2234
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
2235
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 17 
2236
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2237
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T0-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
2238
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
2239
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2240
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
2241
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
2242
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2243
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2244
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
2245
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b 
2246
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
2247
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
2248
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b 
2249
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2250
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2251
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
2252
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2253
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
2254
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
2255
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
2256
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b 
2257
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
2258
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
2259
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
2260
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2261
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b 
2262
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
2263
DLGLOBAL INFO <0015> telnet_interface.c:186 Accept()ed new telnet connection r=127.0.0.1:39762<->l=127.0.0.1:4242
2264
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
2265
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
2266
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
2267
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01 
2268
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
2269
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
2270
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
2271
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2272
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01 
2273
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
2274
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
2275
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01 
2276
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
2277
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
2278
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
2279
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2280
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01 
2281
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
2282
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
2283
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01 
2284
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
2285
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
2286
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
2287
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2288
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01 
2289
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
2290
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2291
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2292
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S62)) transmit an RR poll command
2293
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: fa 03 01 01 
2294
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S62)) start T200 (timeout=0.300000s)
2295
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
2296
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01 
2297
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2298
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2299
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01 
2300
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
2301
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S62)) timer recovery, not sending
2302
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
2303
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: fa 03 01 01 
2304
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2305
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2306
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S62)) stop T200
2307
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2308
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
2309
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
2310
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
2311
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09 
2312
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
2313
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
2314
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
2315
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2316
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03 
2317
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
2318
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
2319
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09 
2320
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
2321
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
2322
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
2323
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2324
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03 
2325
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
2326
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
2327
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09 
2328
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
2329
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
2330
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
2331
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2332
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03 
2333
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
2334
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
2335
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17 
2336
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
2337
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
2338
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
2339
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2340
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11 
2341
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
2342
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2343
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2344
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
2345
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b 
2346
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
2347
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
2348
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b 
2349
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2350
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2351
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
2352
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2353
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
2354
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
2355
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
2356
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b 
2357
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
2358
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
2359
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
2360
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2361
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b 
2362
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
2363
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
2364
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
2365
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
2366
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01 
2367
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
2368
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
2369
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
2370
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2371
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01 
2372
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
2373
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
2374
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01 
2375
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
2376
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
2377
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
2378
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2379
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01 
2380
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
2381
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2382
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2383
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S62)) transmit an RR poll command
2384
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: fa 07 01 01 
2385
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S62)) start T200 (timeout=0.300000s)
2386
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
2387
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01 
2388
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2389
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2390
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01 
2391
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
2392
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S62)) timer recovery, not sending
2393
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
2394
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01 
2395
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
2396
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
2397
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
2398
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2399
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01 
2400
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
2401
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
2402
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: fa 07 01 01 
2403
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2404
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2405
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S62)) stop T200
2406
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2407
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
2408
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
2409
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
2410
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09 
2411
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
2412
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
2413
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
2414
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2415
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03 
2416
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
2417
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
2418
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09 
2419
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
2420
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
2421
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
2422
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2423
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03 
2424
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
2425
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
2426
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09 
2427
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
2428
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
2429
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
2430
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2431
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03 
2432
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
2433
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
2434
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17 
2435
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
2436
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
2437
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
2438
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2439
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11 
2440
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
2441
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2442
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2443
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
2444
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b 
2445
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
2446
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
2447
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b 
2448
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2449
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2450
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
2451
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2452
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
2453
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
2454
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
2455
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b 
2456
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
2457
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
2458
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
2459
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2460
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b 
2461
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
2462
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
2463
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
2464
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
2465
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01 
2466
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
2467
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
2468
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
2469
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2470
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01 
2471
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
2472
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
2473
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01 
2474
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
2475
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
2476
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
2477
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2478
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01 
2479
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
2480
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
2481
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01 
2482
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
2483
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
2484
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
2485
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2486
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01 
2487
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
2488
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
2489
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01 
2490
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
2491
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
2492
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
2493
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2494
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01 
2495
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
2496
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
2497
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09 
2498
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
2499
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
2500
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
2501
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2502
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03 
2503
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
2504
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S0)) Timeout T203 state=LAPD_STATE_MF_EST
2505
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2506
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S0)) transmit an RR poll command
2507
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 01 03 
2508
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
2509
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
2510
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09 
2511
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2512
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2513
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03 
2514
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
2515
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S0)) timer recovery, not sending
2516
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S0)) Timeout T203 state=LAPD_STATE_MF_EST
2517
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2518
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S0)) transmit an RR poll command
2519
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 01 03 
2520
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
2521
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
2522
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09 
2523
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2524
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2525
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03 
2526
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
2527
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S0)) timer recovery, not sending
2528
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
2529
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 01 09 
2530
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2531
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
2532
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
2533
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2534
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
2535
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
2536
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
2537
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 09 
2538
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2539
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
2540
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
2541
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2542
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
2543
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
2544
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T0-S0)) Timeout T203 state=LAPD_STATE_MF_EST
2545
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2546
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T0-S0)) transmit an RR poll command
2547
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 01 11 
2548
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
2549
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
2550
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17 
2551
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2552
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2553
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11 
2554
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
2555
DLLAPD INFO <0016> lapd_core.c:1849 ((0:1-T0-S0)) timer recovery, not sending
2556
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
2557
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 17 
2558
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2559
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T0-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
2560
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
2561
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2562
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
2563
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
2564
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2565
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2566
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
2567
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b 
2568
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
2569
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
2570
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b 
2571
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2572
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2573
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
2574
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2575
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
2576
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
2577
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
2578
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b 
2579
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
2580
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
2581
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
2582
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2583
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b 
2584
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
2585
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
2586
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
2587
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
2588
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01 
2589
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
2590
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
2591
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
2592
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2593
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01 
2594
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
2595
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T0-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2596
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2597
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T0-S62)) transmit an RR poll command
2598
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: fa 01 01 01 
2599
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S62)) start T200 (timeout=0.300000s)
2600
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
2601
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01 
2602
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2603
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2604
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01 
2605
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
2606
DLLAPD INFO <0016> lapd_core.c:1849 ((0:1-T0-S62)) timer recovery, not sending
2607
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2608
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2609
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S62)) transmit an RR poll command
2610
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: fa 07 01 01 
2611
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S62)) start T200 (timeout=0.300000s)
2612
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
2613
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01 
2614
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2615
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2616
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01 
2617
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
2618
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S62)) timer recovery, not sending
2619
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2620
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2621
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S62)) transmit an RR poll command
2622
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: fa 03 01 01 
2623
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S62)) start T200 (timeout=0.300000s)
2624
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
2625
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01 
2626
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2627
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2628
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01 
2629
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
2630
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S62)) timer recovery, not sending
2631
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
2632
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 01 01 01 
2633
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2634
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T0-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2635
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S62)) stop T200
2636
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2637
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
2638
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
2639
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
2640
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: fa 07 01 01 
2641
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2642
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2643
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S62)) stop T200
2644
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2645
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
2646
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
2647
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
2648
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: fa 03 01 01 
2649
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2650
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2651
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S62)) stop T200
2652
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2653
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
2654
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
2655
DLLAPD INFO <0016> lapd_core.c:719 ((0:7-T2-S0)) Timeout T203 state=LAPD_STATE_MF_EST
2656
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2657
DLLAPD INFO <0016> lapd_core.c:732 ((0:7-T2-S0)) transmit an RR poll command
2658
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 01 03 
2659
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
2660
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
2661
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09 
2662
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2663
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2664
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03 
2665
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
2666
DLLAPD INFO <0016> lapd_core.c:1849 ((0:7-T2-S0)) timer recovery, not sending
2667
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
2668
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09 
2669
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
2670
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
2671
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
2672
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2673
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03 
2674
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
2675
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
2676
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09 
2677
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
2678
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
2679
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
2680
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2681
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03 
2682
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
2683
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
2684
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 02 05 01 09 
2685
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2686
DLLAPD INFO <0016> lapd_core.c:1364 ((0:7-T2-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
2687
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S0)) stop T200
2688
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2689
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
2690
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
2691
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
2692
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17 
2693
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
2694
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
2695
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
2696
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2697
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11 
2698
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
2699
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2700
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2701
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
2702
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b 
2703
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
2704
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
2705
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b 
2706
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2707
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2708
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
2709
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2710
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
2711
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
2712
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
2713
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b 
2714
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
2715
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
2716
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
2717
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2718
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b 
2719
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
2720
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
2721
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
2722
DLLAPD INFO <0016> lapd_core.c:719 ((0:7-T2-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2723
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2724
DLLAPD INFO <0016> lapd_core.c:732 ((0:7-T2-S62)) transmit an RR poll command
2725
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: fa 05 01 01 
2726
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S62)) start T200 (timeout=0.300000s)
2727
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
2728
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01 
2729
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2730
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2731
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01 
2732
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
2733
DLLAPD INFO <0016> lapd_core.c:1849 ((0:7-T2-S62)) timer recovery, not sending
2734
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
2735
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01 
2736
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
2737
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
2738
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
2739
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2740
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01 
2741
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
2742
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
2743
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01 
2744
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
2745
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
2746
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
2747
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2748
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01 
2749
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
2750
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
2751
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01 
2752
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
2753
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
2754
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
2755
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2756
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01 
2757
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
2758
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
2759
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: fa 05 01 01 
2760
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2761
DLLAPD INFO <0016> lapd_core.c:1364 ((0:7-T2-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2762
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S62)) stop T200
2763
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2764
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
2765
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
2766
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
2767
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09 
2768
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
2769
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
2770
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
2771
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2772
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03 
2773
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
2774
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
2775
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09 
2776
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
2777
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
2778
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
2779
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2780
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03 
2781
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
2782
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
2783
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09 
2784
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
2785
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
2786
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
2787
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2788
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03 
2789
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
2790
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
2791
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17 
2792
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
2793
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
2794
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
2795
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2796
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11 
2797
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
2798
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2799
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2800
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
2801
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b 
2802
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
2803
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
2804
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b 
2805
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2806
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2807
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
2808
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2809
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
2810
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
2811
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
2812
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b 
2813
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
2814
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
2815
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
2816
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2817
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b 
2818
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
2819
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
2820
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
2821
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
2822
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01 
2823
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
2824
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
2825
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
2826
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2827
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01 
2828
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
2829
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T0-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2830
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2831
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T0-S62)) transmit an RR poll command
2832
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: fa 01 01 01 
2833
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S62)) start T200 (timeout=0.300000s)
2834
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
2835
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01 
2836
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2837
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2838
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01 
2839
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
2840
DLLAPD INFO <0016> lapd_core.c:1849 ((0:1-T0-S62)) timer recovery, not sending
2841
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2842
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2843
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S62)) transmit an RR poll command
2844
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: fa 07 01 01 
2845
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S62)) start T200 (timeout=0.300000s)
2846
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
2847
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01 
2848
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2849
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2850
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01 
2851
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
2852
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S62)) timer recovery, not sending
2853
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2854
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2855
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S62)) transmit an RR poll command
2856
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: fa 03 01 01 
2857
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S62)) start T200 (timeout=0.300000s)
2858
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
2859
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01 
2860
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2861
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2862
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01 
2863
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
2864
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S62)) timer recovery, not sending
2865
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
2866
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 01 01 01 
2867
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2868
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T0-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2869
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S62)) stop T200
2870
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2871
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
2872
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
2873
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
2874
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: fa 07 01 01 
2875
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2876
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2877
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S62)) stop T200
2878
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2879
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
2880
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
2881
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
2882
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: fa 03 01 01 
2883
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2884
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2885
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S62)) stop T200
2886
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2887
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
2888
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
2889
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
2890
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09 
2891
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
2892
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
2893
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
2894
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2895
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03 
2896
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
2897
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S0)) Timeout T203 state=LAPD_STATE_MF_EST
2898
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2899
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S0)) transmit an RR poll command
2900
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 01 03 
2901
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
2902
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
2903
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09 
2904
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2905
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2906
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03 
2907
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
2908
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S0)) timer recovery, not sending
2909
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S0)) Timeout T203 state=LAPD_STATE_MF_EST
2910
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2911
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S0)) transmit an RR poll command
2912
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 01 03 
2913
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
2914
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
2915
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09 
2916
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2917
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2918
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03 
2919
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
2920
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S0)) timer recovery, not sending
2921
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
2922
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 01 09 
2923
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2924
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
2925
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
2926
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2927
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
2928
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
2929
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
2930
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 09 
2931
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2932
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
2933
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
2934
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2935
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
2936
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
2937
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T0-S0)) Timeout T203 state=LAPD_STATE_MF_EST
2938
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2939
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T0-S0)) transmit an RR poll command
2940
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 01 11 
2941
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
2942
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
2943
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17 
2944
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2945
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2946
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11 
2947
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
2948
DLLAPD INFO <0016> lapd_core.c:1849 ((0:1-T0-S0)) timer recovery, not sending
2949
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
2950
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 17 
2951
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_TIMER_RECOV
2952
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T0-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
2953
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
2954
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2955
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
2956
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
2957
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
2958
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
2959
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
2960
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b 
2961
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
2962
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
2963
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b 
2964
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
2965
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
2966
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
2967
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
2968
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
2969
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
2970
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
2971
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b 
2972
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
2973
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
2974
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
2975
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2976
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b 
2977
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
2978
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
2979
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
2980
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
2981
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01 
2982
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
2983
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
2984
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
2985
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2986
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01 
2987
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
2988
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
2989
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01 
2990
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
2991
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
2992
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
2993
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
2994
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01 
2995
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
2996
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
2997
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01 
2998
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
2999
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
3000
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
3001
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3002
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01 
3003
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
3004
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
3005
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01 
3006
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
3007
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
3008
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
3009
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3010
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01 
3011
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
3012
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
3013
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09 
3014
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
3015
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
3016
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
3017
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3018
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03 
3019
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
3020
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
3021
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09 
3022
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
3023
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
3024
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
3025
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3026
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03 
3027
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
3028
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
3029
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09 
3030
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
3031
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
3032
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
3033
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3034
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03 
3035
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
3036
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
3037
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17 
3038
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
3039
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
3040
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
3041
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3042
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11 
3043
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
3044
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
3045
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
3046
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
3047
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b 
3048
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
3049
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
3050
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b 
3051
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
3052
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
3053
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
3054
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
3055
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
3056
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
3057
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
3058
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b 
3059
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
3060
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
3061
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
3062
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3063
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b 
3064
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
3065
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
3066
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
3067
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
3068
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01 
3069
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
3070
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
3071
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
3072
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3073
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01 
3074
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
3075
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
3076
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01 
3077
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
3078
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
3079
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
3080
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3081
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01 
3082
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
3083
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
3084
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01 
3085
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
3086
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
3087
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
3088
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3089
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01 
3090
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
3091
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S62)) Timeout T203 state=LAPD_STATE_MF_EST
3092
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
3093
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S62)) transmit an RR poll command
3094
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: fa 03 01 01 
3095
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S62)) start T200 (timeout=0.300000s)
3096
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
3097
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01 
3098
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
3099
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3100
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01 
3101
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
3102
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S62)) timer recovery, not sending
3103
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
3104
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: fa 03 01 01 
3105
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
3106
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
3107
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S62)) stop T200
3108
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
3109
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
3110
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
3111
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
3112
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09 
3113
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
3114
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
3115
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
3116
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3117
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03 
3118
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
3119
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
3120
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09 
3121
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
3122
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
3123
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
3124
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3125
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03 
3126
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
3127
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S0)) Timeout T203 state=LAPD_STATE_MF_EST
3128
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
3129
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S0)) transmit an RR poll command
3130
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 01 03 
3131
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
3132
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
3133
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09 
3134
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
3135
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3136
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03 
3137
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
3138
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S0)) timer recovery, not sending
3139
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
3140
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 09 
3141
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
3142
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
3143
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
3144
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
3145
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
3146
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
3147
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
3148
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17 
3149
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
3150
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
3151
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
3152
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3153
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11 
3154
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
3155
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
3156
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
3157
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
3158
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b 
3159
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
3160
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
3161
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b 
3162
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
3163
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
3164
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
3165
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
3166
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
3167
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
3168
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
3169
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b 
3170
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
3171
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
3172
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
3173
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3174
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b 
3175
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
3176
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
3177
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
3178
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
3179
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01 
3180
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
3181
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
3182
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
3183
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3184
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01 
3185
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
3186
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
3187
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01 
3188
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
3189
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
3190
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
3191
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3192
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01 
3193
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
3194
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S62)) Timeout T203 state=LAPD_STATE_MF_EST
3195
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
3196
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S62)) transmit an RR poll command
3197
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: fa 07 01 01 
3198
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S62)) start T200 (timeout=0.300000s)
3199
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
3200
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01 
3201
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
3202
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3203
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01 
3204
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
3205
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S62)) timer recovery, not sending
3206
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
3207
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01 
3208
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
3209
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
3210
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
3211
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3212
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01 
3213
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
3214
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
3215
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: fa 07 01 01 
3216
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
3217
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
3218
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S62)) stop T200
3219
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
3220
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
3221
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
3222
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
3223
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09 
3224
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
3225
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
3226
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
3227
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3228
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03 
3229
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
3230
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
3231
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09 
3232
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
3233
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
3234
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
3235
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3236
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03 
3237
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
3238
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
3239
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09 
3240
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
3241
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
3242
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
3243
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3244
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03 
3245
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
3246
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
3247
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17 
3248
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
3249
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
3250
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
3251
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3252
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11 
3253
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
3254
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
3255
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
3256
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
3257
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b 
3258
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
3259
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
3260
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b 
3261
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
3262
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
3263
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
3264
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
3265
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
3266
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
3267
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
3268
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b 
3269
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
3270
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
3271
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
3272
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
3273
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b 
3274
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
3275
^Csignal 2 received
3276
DNM NOTICE <0004> bsc_init.c:66 shutting down OML for BTS 0
3277
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-0-0-NONE)[0x556b6665e710]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3278
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-0-1-NONE)[0x556b6665ec90]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3279
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-0-2-NONE)[0x556b6665f490]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3280
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-0-3-NONE)[0x556b6665fc90]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3281
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-0-4-NONE)[0x556b66660490]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3282
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-0-5-NONE)[0x556b66660d20]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3283
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-0-6-NONE)[0x556b666615b0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3284
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-0-7-NONE)[0x556b66661e40]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3285
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-1-0-NONE)[0x556b666639f0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3286
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-1-1-NONE)[0x556b66663ef0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3287
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-1-2-NONE)[0x556b666646f0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3288
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-1-3-NONE)[0x556b66664ef0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3289
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-1-4-NONE)[0x556b666656f0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3290
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-1-5-NONE)[0x556b66665ef0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3291
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-1-6-NONE)[0x556b666666f0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3292
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-1-7-NONE)[0x556b66666f80]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3293
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-2-0-NONE)[0x556b66668290]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3294
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-2-1-NONE)[0x556b66668810]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3295
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-2-2-NONE)[0x556b66669010]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3296
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-2-3-NONE)[0x556b66669810]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3297
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-2-4-NONE)[0x556b6666a010]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3298
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-2-5-NONE)[0x556b6666a810]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3299
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-2-6-NONE)[0x556b6666b010]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3300
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-2-7-NONE)[0x556b6666b8a0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3301
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-3-0-NONE)[0x556b6666cc50]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3302
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-3-1-NONE)[0x556b6666d150]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3303
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-3-2-NONE)[0x556b6666d950]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3304
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-3-3-NONE)[0x556b6666e150]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3305
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-3-4-NONE)[0x556b6666e950]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3306
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-3-5-NONE)[0x556b6666f150]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3307
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-3-6-NONE)[0x556b6666f950]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3308
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-3-7-NONE)[0x556b666701e0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
3309

    
(1-1/8)
Add picture from clipboard (Maximum size: 48.8 MB)