1
|
|
2
|
RUS 01 0 log
|
3
|
**************
|
4
|
|
5
|
[1970-01-01 00:00:00.000] - xpai_xos.c:214 INFO:XPP (PID=CXC1321797/4_R5B), is RUNNING
|
6
|
[1970-01-01 00:00:00.000] - xos.c:1925 INFO:AUM2HP Flash=64Mb RAM=16Mb AUC-rev=0x0 OSE Delta PowerPC/BL250069
|
7
|
[1970-01-01 00:00:00.000] - xos.c:1937 INFO:XPP STARTED
|
8
|
[1970-01-01 00:00:00.000] - xos.c:1941 INFO:SYS_LM_PID: CXC1321797/4_R5B
|
9
|
[1970-01-01 00:00:00.000] - xos.c:1945 INFO:SYS_LF_PID: CXP901096%12_R27KB
|
10
|
[1970-01-01 00:00:00.000] - xos.c:1949 INFO:SYS_RESTART_CAUSE: COLD
|
11
|
[1970-01-01 00:00:00.000] - xos.c:1953 INFO:IBOOT startRestartCause: IBOOT_POWER_ON_RESET
|
12
|
[1970-01-01 00:00:00.000] - xos.c:1989 INFO:IBOOT PID: CXC1321302/4-R3B
|
13
|
[1970-01-01 00:00:00.000] - xos.c:1990 INFO:XPL PID: CXC1321812/1-R4F
|
14
|
[1970-01-01 00:00:00.000] - xos.c:919 INFO:SYS_HW_PID: KRC 118 62/2
|
15
|
[1970-01-01 00:00:00.000] - xos.c:919 INFO:SYS_HW_REV: R1E
|
16
|
[1970-01-01 00:00:00.000] - xos.c:919 INFO:SYS_HW_NAME: RUS 01 B8
|
17
|
[1970-01-01 00:00:00.000] - xos.c:919 INFO:SYS_HW_DATE: 20120725
|
18
|
[1970-01-01 00:00:00.000] - xos.c:919 INFO:SYS_HW_SERIAL: CA70667306
|
19
|
[1970-01-01 00:00:00.000] XPP_XHP_ARM_LM xhp_arm_lm.c:434 INFO:Supports 2 links
|
20
|
[1970-01-01 00:00:00.000] XPP_XHP_ARM_LM xhp_arm_lm.c:443 INFO:Subscribe tag DPStarted
|
21
|
[1970-01-01 00:00:00.000] XPP_HDR_I2C hdr_i2c_aum2.c:369 INFO:Four different I2C buses are connected via a PCA9516 hub to the AUC's I2C port
|
22
|
[1970-01-01 00:00:00.004] XPP_XHP_LM hdr_fifo.c:1675 INFO:HDR_int created
|
23
|
[1970-01-01 00:00:00.004] XPP_XHP_LM xhp_lm.c:178 INFO:XPP_XHP created
|
24
|
[1970-01-01 00:00:00.004] XPP_XHP_LM xhp_lm.c:186 INFO:XPP_XHP_TS created
|
25
|
[1970-01-01 00:00:01.024] XPP_HDR_clk hdr_clk.c:315 INFO:Estimated clock frequency: 194 MHz
|
26
|
[1970-01-01 00:00:06.764] XPP_XLL_OffsetAddressCheck xll.c:2529 INFO:XPP_XLL_OffsetAddressCheck started, lmcNo=0
|
27
|
[1970-01-01 00:00:06.768] XPP_XHP xhp.c:2544 INFO:Sniff frames with TRACE(2..
|
28
|
[1970-01-01 00:00:06.768] INT_PROC hdr_fifo.c:589 INFO:HDLC address 2 configured in HDR
|
29
|
[1970-01-01 00:00:06.768] XPP_XHP xhp.c:696 INFO:HDLC Station Address 2 is configured
|
30
|
[1970-01-01 00:00:06.768] INT_PROC hdr_fifo.c:589 INFO:HDLC address 3 configured in HDR
|
31
|
[1970-01-01 00:00:06.768] XPP_XHP xhp.c:696 INFO:HDLC Station Address 3 is configured
|
32
|
[1970-01-01 00:00:06.932] main xos.c:716 INFO:Heap for application created, start=0x380000, size=0x10000
|
33
|
[1970-01-01 00:00:06.932] main xos.c:1171 INFO:Application XDP with PID CXC1327128/2_R6A_1 is started in SUPERVISORY mode
|
34
|
[1970-01-01 00:00:06.972] main xos.c:716 INFO:Heap for application created, start=0x500000, size=0x500000
|
35
|
[1970-01-01 00:00:06.972] main xos.c:1171 INFO:Application RUWA with PID CXC1123437%1_R27KB is started in SUPERVISORY mode
|
36
|
[1970-01-01 00:00:06.972] XPP_XCBC xcbc.c:4421 INFO:User application started. No XP CBCI-AU server XcbcServer started.
|
37
|
[1970-01-01 00:00:07.012] - xpai_xos.c:214 INFO:XDP (PID=CXC1327128/2_R6A_1), is RUNNING
|
38
|
[1970-01-01 00:00:07.016] XDP_XDMMI xdmmi.c:1228 INFO:found 1 maintenance button
|
39
|
[1970-01-01 00:00:07.092] - xpai_xos.c:214 INFO:RUWA (PID=CXC1123437%1_R27KB), is RUNNING
|
40
|
[1970-01-01 00:00:07.100] cfhe cfhe.cc:4402 INFO:SAR:CFHE started
|
41
|
[1970-01-01 00:00:07.100] ccie ccie.cc:6916 INFO:SAR:CCIE_SW(PID=CXA104300_3-R3B01) is running
|
42
|
[1970-01-01 00:00:07.108] - initFunc.cc:11 INFO:initFuncLayer started
|
43
|
[1970-01-01 00:00:07.108] - startUp.cc:63 INFO:DBG:StartUp constructor start
|
44
|
[1970-01-01 00:00:07.108] - startUp.cc:66 INFO:DBG:StartUp constructor end
|
45
|
[1970-01-01 00:00:07.108] - startUp.cc:105 INFO:DBG:StartUp init begin
|
46
|
[1970-01-01 00:00:07.120] - cmdProxy.cc:190 INFO:CMD xpp caled cmd proxy
|
47
|
[1970-01-01 00:00:07.120] - cmdProxy.cc:190 INFO:CMD hal caled cmd proxy
|
48
|
[1970-01-01 00:00:07.120] - cmdProxy.cc:190 INFO:CMD board caled cmd proxy
|
49
|
[1970-01-01 00:00:07.128] eLogEngineProc cmdProxy.cc:190 INFO:CMD elog caled cmd proxy
|
50
|
[1970-01-01 00:00:07.680] - dataBase.cc:297 INFO:SW Data Base loaded.
|
51
|
[1970-01-01 00:00:07.752] - dataBase.cc:408 INFO:Production(calibration) Data Base loaded.
|
52
|
[1970-01-01 00:00:08.636] - dataBase.cc:172 INFO:freqBand=BandVIII, trxDrvSet=422, paDrvSet=pa208
|
53
|
[1970-01-01 00:00:08.636] - dataBase.cc:173 INFO:Power Class 80W selected
|
54
|
[1970-01-01 00:00:08.636] - cmdProxy.cc:190 INFO:CMD db caled cmd proxy
|
55
|
[1970-01-01 00:00:08.640] - startUp.cc:76 INFO:DBG:StartUp initSalInterfaces start
|
56
|
[1970-01-01 00:00:08.640] - cmdProxy.cc:190 INFO:CMD salparam caled cmd proxy
|
57
|
[1970-01-01 00:00:08.644] - startUp.cc:88 INFO:DBG:StartUp initSalInterfaces end
|
58
|
[1970-01-01 00:00:08.644] - cmdProxy.cc:190 INFO:CMD gio caled cmd proxy
|
59
|
[1970-01-01 00:00:09.820] - fpga.cc:108 INFO:FPGA Application (CXC 112 3631/4 R5K01 20101009) is loaded and started.
|
60
|
[1970-01-01 00:00:09.820] - cmdProxy.cc:190 INFO:CMD cfpga caled cmd proxy
|
61
|
[1970-01-01 00:00:09.940] - ltu491warp.cc:106 INFO:Programming LTU as free run
|
62
|
[1970-01-01 00:00:09.952] - warp.cc:358 INFO:Driver warpA_mcr's warp version is 1.7.
|
63
|
[1970-01-01 00:00:09.952] - cmdProxy.cc:190 INFO:CMD warpA caled cmd proxy
|
64
|
[1970-01-01 00:00:09.964] - cmdProxy.cc:190 INFO:CMD spi caled cmd proxy
|
65
|
[1970-01-01 00:00:09.964] XDP_XDOS xdos.c:1125 INFO:set board parameter SYS_BUTTON0_PRESS_VEC to 58
|
66
|
[1970-01-01 00:00:09.964] XDP_XDOS xdos.c:1125 INFO:set board parameter SYS_BUTTON0_RELEASE_VEC to 57
|
67
|
[1970-01-01 00:00:09.964] XDP_XDLM xdos.c:684 INFO:UIC3 INIT!!!!
|
68
|
[1970-01-01 00:00:09.964] XPP_XHP_ARM_LM xhp_arm_lm.c:603 INFO:Tag received. Start links.
|
69
|
[1970-01-01 00:00:09.964] XPP_XHP_ARM_LM hdr_ecp_aum2e.c:1095 INFO:Create ECP driver with ecpAddress=0x90404800, ecpIntVec=51
|
70
|
[1970-01-01 00:00:09.968] XPP_XHP_ARM_LM hdr_ecp_aum2e.c:1110 INFO:HDR_md0 created
|
71
|
[1970-01-01 00:00:09.968] XPP_XHP_ARM_LM hdr_ecp_aum2e.c:1119 INFO:HDR_0 created
|
72
|
[1970-01-01 00:00:09.968] XPP_XHP_ARM_LM hdr_ecp_aum2e.c:1151 INFO:HDR_int0 created
|
73
|
[1970-01-01 00:00:09.968] XPP_XHP_ARM_LM xhp_arm_cm_if.c:298 INFO:HDLC ARM CM connection object for CPRI link 0 created
|
74
|
[1970-01-01 00:00:09.968] - ricr_config.c:180 INFO:RICR Configuration:
|
75
|
cpri_intvec_start: 49
|
76
|
cpri_intvec_dir: Descending
|
77
|
no of ports: 2
|
78
|
speed:
|
79
|
min index: 0
|
80
|
max index: 1
|
81
|
time allowed for FPGA startup: 1 ms
|
82
|
speed setup method: Xilinx
|
83
|
rbs SFP MMI type: RBS6000_MMI
|
84
|
[1970-01-01 00:00:09.968] XPP_XHP_ARM_LM xhp_arm_lm.c:630 INFO:LINX link bp0 created
|
85
|
[1970-01-01 00:00:09.968] XPP_XHP_ARM_LM hdr_ecp_aum2e.c:1095 INFO:Create ECP driver with ecpAddress=0x90404850, ecpIntVec=50
|
86
|
[1970-01-01 00:00:09.968] XPP_XHP_ARM_LM hdr_ecp_aum2e.c:1110 INFO:HDR_md1 created
|
87
|
[1970-01-01 00:00:09.968] XPP_XHP_ARM_LM hdr_ecp_aum2e.c:1119 INFO:HDR_1 created
|
88
|
[1970-01-01 00:00:09.968] XPP_XHP_ARM_LM hdr_ecp_aum2e.c:1151 INFO:HDR_int1 created
|
89
|
[1970-01-01 00:00:09.968] XPP_XHP_ARM_LM xhp_arm_cm_if.c:298 INFO:HDLC ARM CM connection object for CPRI link 1 created
|
90
|
[1970-01-01 00:00:09.968] XPP_XHP_ARM_LM xhp_arm_lm.c:630 INFO:LINX link bp1 created
|
91
|
[1970-01-01 00:00:09.968] HDR_0 hdr_ecp_aum2e.c:1015 INFO:initInstanceData: interrupt mode
|
92
|
[1970-01-01 00:00:09.968] XPP_XHP_0 xhp_arm_cm.c:2656 INFO:Sniff frames with TRACE(2..
|
93
|
[1970-01-01 00:00:09.968] XPP_XHP_0 xhp_arm_cm.c:2669 INFO:DC_INIT
|
94
|
[1970-01-01 00:00:09.968] XPP_XHP_0 xhp_arm_cm.c:2684 INFO:DC_CONNECT
|
95
|
[1970-01-01 00:00:09.968] HDR_0 hdr_ecp_aum2e.c:830 INFO:HDLC address 2 configured in HDR
|
96
|
[1970-01-01 00:00:09.968] XPP_XHP_0 xhp_arm_cm.c:657 INFO:HDLC Station Address 2 is configured
|
97
|
[1970-01-01 00:00:09.968] HDR_0 hdr_ecp_aum2e.c:830 INFO:HDLC address 3 configured in HDR
|
98
|
[1970-01-01 00:00:09.968] XPP_XHP_0 xhp_arm_cm.c:657 INFO:HDLC Station Address 3 is configured
|
99
|
[1970-01-01 00:00:09.972] HDR_1 hdr_ecp_aum2e.c:1015 INFO:initInstanceData: interrupt mode
|
100
|
[1970-01-01 00:00:09.972] XPP_XHP_1 xhp_arm_cm.c:2656 INFO:Sniff frames with TRACE(2..
|
101
|
[1970-01-01 00:00:09.972] XPP_XHP_1 xhp_arm_cm.c:2669 INFO:DC_INIT
|
102
|
[1970-01-01 00:00:09.972] XPP_XHP_1 xhp_arm_cm.c:2684 INFO:DC_CONNECT
|
103
|
[1970-01-01 00:00:09.972] HDR_1 hdr_ecp_aum2e.c:830 INFO:HDLC address 2 configured in HDR
|
104
|
[1970-01-01 00:00:09.972] XPP_XHP_1 xhp_arm_cm.c:657 INFO:HDLC Station Address 2 is configured
|
105
|
[1970-01-01 00:00:09.972] HDR_1 hdr_ecp_aum2e.c:830 INFO:HDLC address 3 configured in HDR
|
106
|
[1970-01-01 00:00:09.972] XPP_XHP_1 xhp_arm_cm.c:657 INFO:HDLC Station Address 3 is configured
|
107
|
[1970-01-01 00:00:09.972] RICR_fault_handler ricr_common.c:520 INFO:PROCESS RICR_fault_handler started.
|
108
|
[1970-01-01 00:00:09.972] RICR nci_control.c:2420 INFO:Entering main loop
|
109
|
[1970-01-01 00:00:09.972] - ricrai.c:553 INFO:RICR_initRICR: RICR CYB10173/1 R5A started.
|
110
|
[1970-01-01 00:00:09.972] - cmdProxy.cc:190 INFO:CMD cpri caled cmd proxy
|
111
|
[1970-01-01 00:00:09.980] cpriCtrlProc linkCtrlProc.cc:81 INFO:RICR link status ind updated to link 0,hfnSync:0x00,linkOperational:0x00,syncBit:0x00,ltuMode:0
|
112
|
[1970-01-01 00:00:09.980] cpriCtrlProc linkCtrlProc.cc:81 INFO:RICR link status ind updated to link 1,hfnSync:0x00,linkOperational:0x00,syncBit:0x00,ltuMode:0
|
113
|
[1970-01-01 00:00:09.980] RICR_sup_link_0 slave.c:285 INFO:role_slave: link supervisor for link 0 started
|
114
|
[1970-01-01 00:00:09.980] RICR_sup_link_1 slave.c:285 INFO:role_slave: link supervisor for link 1 started
|
115
|
[1970-01-01 00:00:09.984] cpriCtrlProc linkCtrlProc.cc:214 INFO:RICR link status ind for link 1
|
116
|
hfnSync: 0x00
|
117
|
linkOperational: 0x00
|
118
|
syncBit: 0x00
|
119
|
[1970-01-01 00:00:09.984] cpriCtrlProc linkCtrlProc.cc:224 INFO: Link is not operational
|
120
|
[1970-01-01 00:00:09.984] cpriCtrlProc linkCtrlProc.cc:252 INFO: No HFNSYNC either
|
121
|
[1970-01-01 00:00:10.000] - startUp.cc:49 INFO:DBG:StartUp initHalCplusplusInterfaces begin
|
122
|
[1970-01-01 00:00:10.000] - halvswr.cc:40 INFO:Finished halVswrIfInit, found 0 measurers
|
123
|
[1970-01-01 00:00:10.000] - startUp.cc:52 INFO:DBG:StartUp initHalCplusplusInterfaces success
|
124
|
[1970-01-01 00:00:10.000] - startUp.cc:172 INFO:HW initialization completed
|
125
|
[1970-01-01 00:00:10.000] - startUp.cc:173 INFO:DBG:StartUp init success
|
126
|
[1970-01-01 00:00:10.000] - initFunc.cc:22 INFO:initFuncLayer complete
|
127
|
[1970-01-01 00:00:10.012] VSWRSvProc VSWR_Supervision_proc.cc:91 INFO:No VSWRMeasSupervision objects present, stopping VSWR background process
|
128
|
[1970-01-01 00:00:10.012] CurrMeasProc Current_Meas_proc.cc:73 INFO:CurrentMeas has now stopped with 0 supervision units
|
129
|
[1970-01-01 00:00:10.064] cbcRuProc cmdProxy.cc:190 INFO:CMD ru caled cmd proxy
|
130
|
[1970-01-01 00:00:10.068] - cmdProxy.cc:190 INFO:CMD bc caled cmd proxy
|
131
|
[1970-01-01 00:00:10.068] ccie ccieCommIfPubHandler.cc:325 INFO:SAR:Published interface: BcServer(0x1007d) and RRUL-BCI(highestProtocolRev:1,sigNoLimit:0x1658000->0x1658bff),dispatchPid_: 0x10062
|
132
|
[1970-01-01 00:00:10.084] cpriCtrlProc ltu491warp.cc:106 INFO:Programming LTU as free run
|
133
|
[1970-01-01 00:00:10.112] faultManagerProc cmdProxy.cc:190 INFO:CMD fm caled cmd proxy
|
134
|
[1970-01-01 00:00:10.112] faultManagerProc fault_manager.cc:806 INFO:Set event STARTUP_EVENT to time: 15000[ms], from 0x10058
|
135
|
[1970-01-01 00:00:10.148] ccie ccie.cc:618 INFO:SAR:Published interface: XcbcServer(0x1007e) and BASIC-CBCI(highestProtocolRev:511,sigNoLimit:0x103d000->0x103d5ff),dispatchPid_: 0x10063
|
136
|
[1970-01-01 00:00:10.148] cbcRuProc cbcRuw.cc:119 INFO:Auboot SW started
|
137
|
[1970-01-01 00:00:46.240] RICR_sup_link_0 nci_control.c:1454 INFO:update_clock_source: Using link 0 as clock source
|
138
|
[1970-01-01 00:00:46.240] cpriCtrlProc linkCtrlProc.cc:81 INFO:RICR link status ind updated to link 0,hfnSync:0x01,linkOperational:0x00,syncBit:0x00,ltuMode:0
|
139
|
[1970-01-01 00:00:46.244] cpriCtrlProc linkCtrlProc.cc:214 INFO:RICR link status ind for link 0
|
140
|
hfnSync: 0x01
|
141
|
linkOperational: 0x00
|
142
|
syncBit: 0x00
|
143
|
[1970-01-01 00:00:46.244] cpriCtrlProc linkCtrlProc.cc:224 INFO: Link is not operational
|
144
|
[1970-01-01 00:00:46.244] cpriCtrlProc linkCtrlProc.cc:228 INFO: Link has HFNSYNC
|
145
|
[1970-01-01 00:00:46.444] cpriCtrlProc ltu491warp.cc:125 INFO:Programming LTU to lock
|
146
|
[1970-01-01 00:00:46.972] cpriCtrlProc linkCtrlProc.cc:381 INFO:Ok, reporting LTU locked to RICR
|
147
|
[1970-01-01 00:00:46.972] RICR_sup_link_0 slave.c:759 INFO:role_slave: Link 0 up at 2.5 Gbps (densi-shield, CPRI rev 3)
|
148
|
[1970-01-01 00:00:46.972] cpriCtrlProc linkCtrlProc.cc:81 INFO:RICR link status ind updated to link 0,hfnSync:0x01,linkOperational:0x01,syncBit:0x00,ltuMode:1
|
149
|
[1970-01-01 00:00:46.976] cpriCtrlProc linkCtrlProc.cc:214 INFO:RICR link status ind for link 0
|
150
|
hfnSync: 0x01
|
151
|
linkOperational: 0x01
|
152
|
syncBit: 0x00
|
153
|
[1970-01-01 00:00:47.004] XPP_XHP_0 xhp_arm_cm.c:2468 INFO:Connected.
|
154
|
[1970-01-01 00:00:47.004] XPP_XHP_0 xhp_arm_cm.c:1278 INFO:Connected HDLC address: 2
|
155
|
[1970-01-01 00:00:47.004] XPP_XHP_SUP xhp_sup.c:240 INFO:Tag XHP_LinkUp0 received.
|
156
|
[1970-01-01 00:00:47.028] ccie ccieCommHandler.cc:684 INFO:ABN:signal rejected,signal:ELIB_BC_CONN_ESTABLISH_REJ,error code:unsuccessful(0x1),additional info: protocol not supported:3, highest supported protoco
|
157
|
l revision:1
|
158
|
[1970-01-01 00:00:47.028] ccie ccieCommHandler.cc:838 INFO:EVT:green led misssing resource end
|
159
|
[1970-01-01 00:00:47.028] ccie ccieBaseHandler.cc:530 INFO:EVT: State change, interface: RRUL-BCI,connection state:NOT_CONNECTED->CONNECTED
|
160
|
[1970-01-01 00:00:47.036] - bcRu.cc:211 INFO:Pre-installed SW found (CXP9017316%1_R39UG) in slot 1
|
161
|
[1970-01-01 00:00:47.040] bcHandler commonBoardControlBC.cc:2004 INFO:MMI type set: RBS6000
|
162
|
[1970-01-01 00:00:47.040] bcHandler commonBoardControlBC.cc:203 INFO: EVT: ELIB_BC_SET_VISUAL_INDICATION_CFM: visualized state: O DEPENDENT RESOURCE MISSING
|
163
|
[1970-01-01 00:00:47.052] - bcRu.cc:211 INFO:Pre-installed SW found (CXP9017316%1_R39UG) in slot 1
|
164
|
[1970-01-01 00:00:47.052] bcHandler boardControlBase.cc:2188 INFO:Compatible list file found for swPid CXP901096%12_R27KB: NO
|
165
|
[1970-01-01 00:00:47.056] bcHandler boardControlBase.cc:2184 INFO:Compatible list file found for swPid CXP9017316%1_R39UG: YES
|
166
|
[1970-01-01 00:00:47.060] bcHandler boardControlBase.cc:2184 INFO:Compatible list file found for swPid CXP9013268%6_R63DN: YES
|
167
|
[1970-01-01 00:00:47.068] bcHandler commonBoardControlBC.cc:203 INFO: EVT: ELIB_BC_SET_VISUAL_INDICATION_CFM: visualized state: O LOADING SW
|
168
|
[1970-01-01 00:00:47.072] bciLoadProc boardControlBase.cc:729 INFO:Start initiate the loading
|
169
|
[1970-01-01 00:00:47.072] XPP_XCBC xcbc.c:1939 INFO:Warning: Load LM init failed. ErrorCode=4
|
170
|
[1970-01-01 00:00:47.072] bciLoadProc boardControlBase.cc:793 INFO:Initiating of loading is ended, loadingInProcess=0
|
171
|
[1970-01-01 00:00:47.072] bcHandler boardControlBase.cc:942 INFO:handleSelectLmc: selected loadmodule :CXP9013268%6_R63DN found in flash
|
172
|
[1970-01-01 00:00:47.076] - bcRu.cc:488 INFO:Shutting down PA due to board restart.
|
173
|
[1970-01-01 00:00:47.076] - trxControllerImpl.cc:70 INFO:calling FpgaTest::init()
|
174
|
[1970-01-01 00:00:47.076] - cmdProxy.cc:190 INFO:CMD trx caled cmd proxy
|
175
|
[1970-01-01 00:00:47.096] - trxControllerImpl.cc:297 ERROR:TrxControllerImpl::executeAction() Cannot execute action. The TrxController has not been started!
|
176
|
[1970-01-01 00:00:47.096] - trxCtrlHandler.cc:1151 INFO:TrxCtrl zero fill failed
|
177
|
[1970-01-01 00:00:47.096] - trxControllerImpl.cc:297 ERROR:TrxControllerImpl::executeAction() Cannot execute action. The TrxController has not been started!
|
178
|
[1970-01-01 00:00:47.096] - trxCtrlHandler.cc:1156 INFO:Unable to instruct TrxCtrl to shut down the PA
|
179
|
[1970-01-01 00:00:47.100] bcHandler commonBoardControlBC.cc:575 INFO:G restart req
|
180
|
[1970-01-01 00:00:47.100] XPP_XCBC xcbc.c:2743 INFO:Restart board, signal: ELIB_BC_RESTART_BOARD_FWD, Restart reason: G restart req
|
181
|
[1970-01-01 00:00:47.100] XPP_XCBC xcbc.c:2834 INFO:Restarting on CXP9013268%6_R63DN
|
182
|
[1970-01-01 00:00:00.148] - xpai_xos.c:284 INFO:XPP (PID=CXC1321797/4_R36AE), is RUNNING
|
183
|
[1970-01-01 00:00:00.148] - xpai_xos.c:286 INFO:The XPP with XPAI REVISION: CYB10190-R6L
|
184
|
[1970-01-01 00:00:00.148] - xos.c:3614 INFO:AUM2HP Flash=FLASH_STRATA_P30 64Mb RAM=16Mb AUC-rev=0x0 OSE Delta PowerPC/BL770463
|
185
|
[1970-01-01 00:00:00.148] - xos.c:3626 INFO:XPP STARTED
|
186
|
[1970-01-01 00:00:00.148] - xos.c:3630 INFO:SYS_LM_PID: CXC1321797/4_R36AE
|
187
|
[1970-01-01 00:00:00.148] - xos.c:3634 INFO:SYS_LF_PID: CXP9013268%6_R63DN
|
188
|
[1970-01-01 00:00:00.148] - xos.c:3638 INFO:SYS_RESTART_CAUSE: ORDERED
|
189
|
[1970-01-01 00:00:00.148] - xos.c:3643 INFO:IBOOT startRestartCause: IBOOT_SW_RESET
|
190
|
[1970-01-01 00:00:00.148] - xos.c:3679 INFO:IBOOT PID: CXC1321302/4-R3B
|
191
|
[1970-01-01 00:00:00.148] - xos.c:3680 INFO:XPL PID: CXC1321812/1-R6A
|
192
|
[1970-01-01 00:00:00.148] - xos.c:1840 INFO:SYS_HW_PID: KRC 118 62/2
|
193
|
[1970-01-01 00:00:00.148] - xos.c:1840 INFO:SYS_HW_REV: R1E
|
194
|
[1970-01-01 00:00:00.148] - xos.c:1840 INFO:SYS_HW_NAME: RUS 01 B8
|
195
|
[1970-01-01 00:00:00.148] - xos.c:1840 INFO:SYS_HW_DATE: 20120725
|
196
|
[1970-01-01 00:00:00.148] - xos.c:1840 INFO:SYS_HW_SERIAL: CA70667306
|
197
|
[1970-01-01 00:00:00.148] - xdai_xdos.c:155 INFO:The XPP with XDAI REVISION: CYB10191-R3B
|
198
|
[1970-01-01 00:00:00.148] a4ci_startup /repo/ncixp.build/nci/BCP_CNH1606396/xp_bl/xpp_bl/ecb_swu/src/mhp_device.c:654 INFO:0 ports found on 0 primary stations.
|
199
|
[1970-01-01 00:00:00.148] XDP_XDMMI xdmmi.c:1382 INFO:Maintenance button found of type MAIN.
|
200
|
[1970-01-01 00:00:00.148] XXP_0 xxp.c:1823 INFO:Configured with logPortAddr=0, dmeId=0, muxChannel=0, xdhpPid=0x10004B
|
201
|
[1970-01-01 00:00:00.148] XXP_1 xxp.c:1823 INFO:Configured with logPortAddr=1, dmeId=0, muxChannel=1, xdhpPid=0x10004B
|
202
|
[1970-01-01 00:00:00.148] main xos.c:2180 INFO:Application RUS with PID CXC1123669%1R63DN is started in SUPERVISORY mode
|
203
|
[1970-01-01 00:00:00.148] XPP_XCBC xcbc.c:4597 INFO:User application started. No XP CBCI-AU server XcbcServer started.
|
204
|
[1970-01-01 00:00:00.188] - xpai_xos.c:284 INFO:RUS (PID=CXC1123669%1R63DN), is RUNNING
|
205
|
[1970-01-01 00:00:00.188] - xpai_xos.c:286 INFO:The RUS with XPAI REVISION: CYB10190-R6L
|
206
|
[1970-01-01 00:00:00.188] - xdai_xdos.c:155 INFO:The RUS with XDAI REVISION: CYB10191-R3B
|
207
|
[1970-01-01 00:00:00.196] cfhe cfheProc.cc:58 INFO:SAR:CFHE started
|
208
|
[1970-01-01 00:00:00.216] startUp delayHandler.cc:337 INFO:initDelayRunner: DelayRtcBusyWait
|
209
|
[1970-01-01 00:00:00.328] startUp dataBase.cc:848 INFO:HW Data Base loaded.
|
210
|
[1970-01-01 00:00:01.024] XPP_HDR_clk hdr_clk.c:281 INFO:Estimated clock frequency: 194 MHz
|
211
|
[1970-01-01 00:00:03.452] startUp fpga.cc:165 INFO:FPGA Application (CXC 112 3631/4 R6C01 20150601) is loaded and started.
|
212
|
[1970-01-01 00:00:03.548] startUp ltu491warp.cc:136 INFO:Programming LTU as free run
|
213
|
[1970-01-01 00:00:03.548] startUp ltu491warp.cc:137 INFO:Delay 0ms after programming LTU to free run
|
214
|
[1970-01-01 00:00:03.680] ltuServer0 ltuiServer.cc:673 INFO:Create an instance of LtuiServer.
|
215
|
[1970-01-01 00:00:03.808] XPP_XHP_ARM_LM xhp_arm_dev.c:427 INFO:Opening Device Driver "XHP_ARM_XDD_ECP", unit 0
|
216
|
[1970-01-01 00:00:03.812] XPP_XHP_ARM_LM xhp_arm_dev.c:427 INFO:Opening Device Driver "XHP_ARM_XDD_ECP", unit 5
|
217
|
[1970-01-01 00:00:03.812] XPP_XHP_0_0 xhp_arm_dev.c:511 INFO:Starting Device Driver "XHP_ARM_XDD_ECP", unit 0
|
218
|
[1970-01-01 00:00:03.812] XPP_XHP_1_0 xhp_arm_dev.c:511 INFO:Starting Device Driver "XHP_ARM_XDD_ECP", unit 5
|
219
|
[1970-01-01 00:00:03.820] startUp ricrai.c:2379 INFO:HRICR not found!
|
220
|
[1970-01-01 00:00:03.824] HRICR hricr_config.c:1856 INFO:HRICR Configuration: cpri_intvec_start: 49, cpri_intvec_dir: -1
|
221
|
[1970-01-01 00:00:03.824] HRICR hricr_config.c:4579 INFO:HRICR Configuration:device type: COM_FPGA; number of logical ports: 2; number of physical ports: 4; min index slave: 2, max index slave: 3, min index mas
|
222
|
ter: 2, max index master: 3, preferred index: -; time allowed for FPGA startup: 1 ms; speed setup method: Xilinx; rbs SFP MMI type: RBS6000_MMI; fpga release number (for alcor): 0; port_based_addition_ecp_confi
|
223
|
g: 0.
|
224
|
[1970-01-01 00:00:03.824] HRICR hricr_config.c:4595 INFO:HRICR Configuration:cpri_cfgtx_invpair: 0x00000000; cpri_cfgtx_adj_mask: 0x00000000; cpri_cfgtx_adj_bits[0]: 0x00000000; cpri_cfgtx_adj_bits[1]: 0x000000
|
225
|
00; cpri_cfgtx_adj_bits[2]: 0x00000000; cpri_cfgtx_adj_bits[3]: 0x00000000; cpri_cfgrx_adj_mask: 0x00000000.
|
226
|
[1970-01-01 00:00:03.828] HRICR hricr.c:7408 INFO:Process HRICR_hw_monitor found.
|
227
|
[1970-01-01 00:00:03.828] startUp hricrai.c:637 INFO:HRICR CYB10173/8 R11EG is started, processName HRICR
|
228
|
[1970-01-01 00:00:03.828] HRICR hricr.c:2330 INFO:HRICR conn_state change: RIHI_NOT_CONNECTED->RIHI_CONNECTED
|
229
|
[1970-01-01 00:00:03.828] RICR ricr_config.c:178 INFO:RICR Configuration:no of ports: 2; speed: min index slave: 2, max index slave: 3, min index master: 2 max index master: 3 preferred index: -; Running in app
|
230
|
lication mode
|
231
|
[1970-01-01 00:00:03.828] RICR_fault_handler ricr_common.c:519 INFO:PROCESS RICR_fault_handler started.
|
232
|
[1970-01-01 00:00:03.832] RICR_sup_link_0 slave.c:712 INFO:slave_init: link supervisor for link 0 started
|
233
|
[1970-01-01 00:00:03.832] RICR_sup_link_1 slave.c:712 INFO:slave_init: link supervisor for link 1 started
|
234
|
[1970-01-01 00:00:03.836] startUp ricrai.c:2446 INFO:RICR PID:CYB10173/11-R12EG is started, processName RICR
|
235
|
[1970-01-01 00:00:03.836] RICR ltui_if.c:315 INFO:server_status = LTUI_LOCKING
|
236
|
[1970-01-01 00:00:03.836] startUp ricrai.c:560 INFO:added internal ricr subscriber, type 0
|
237
|
[1970-01-01 00:00:03.836] cpriCtrlProc linkCtrlCpriFpga.cc:281 INFO:Receive RICR link status ind:
|
238
|
linkPort: 0x00
|
239
|
hfnSync: 0x01
|
240
|
linkOperational: 0x00
|
241
|
syncBit: 0x00
|
242
|
tAdvance: 0x00000000
|
243
|
refClkPortNo 0
|
244
|
[1970-01-01 00:00:03.836] cpriCtrlProc linkCtrlCpriFpga.cc:365 INFO:m_ricrCpriDetected=1 ltu_locked_on_link=-1 cpriPort[0].linkOperational=0 cpriPort[1].linkOperational=0
|
245
|
[1970-01-01 00:00:03.836] cpriCtrlProc linkCtrlCpriFpga.cc:281 INFO:Receive RICR link status ind:
|
246
|
linkPort: 0x01
|
247
|
hfnSync: 0x00
|
248
|
linkOperational: 0x00
|
249
|
syncBit: 0x00
|
250
|
tAdvance: 0x00000000
|
251
|
refClkPortNo 0
|
252
|
[1970-01-01 00:00:03.836] cpriCtrlProc linkCtrlCpriFpga.cc:365 INFO:m_ricrCpriDetected=1 ltu_locked_on_link=-1 cpriPort[1].linkOperational=0 cpriPort[0].linkOperational=0
|
253
|
[1970-01-01 00:00:03.840] ltuServer0 ltu491warp.cc:163 INFO:Programming LTU to lock
|
254
|
[1970-01-01 00:00:03.840] ltuServer0 ltu491warp.cc:164 INFO:Delay 100ms after programming LTU to lock
|
255
|
[1970-01-01 00:00:03.944] ltuServer0 ltuiServer.cc:510 INFO:LtuState:FREE_RUN->LOCK_IN_PROGRESS
|
256
|
[1970-01-01 00:00:03.956] ltuServer0 ltuiServer.cc:448 INFO:LtuState:LOCK_IN_PROGRESS->LOCKED, lock notification timer started
|
257
|
[1970-01-01 00:00:03.956] RICR ltui_if.c:391 INFO:server_status = LTUI_LOCKED
|
258
|
[1970-01-01 00:00:03.972] RICR_sup_link_0 slave.c:1571 INFO:slave_main_loop_code: Link 0 up at 2.5 Gbps (densi-shield, CPRI rev 3)
|
259
|
[1970-01-01 00:00:03.972] cpriCtrlProc linkCtrlCpriFpga.cc:281 INFO:Receive RICR link status ind:
|
260
|
linkPort: 0x00
|
261
|
hfnSync: 0x01
|
262
|
linkOperational: 0x01
|
263
|
syncBit: 0x00
|
264
|
tAdvance: 0x000007c9
|
265
|
refClkPortNo 0
|
266
|
[1970-01-01 00:00:03.972] cpriCtrlProc linkCtrlCpriFpga.cc:365 INFO:m_ricrCpriDetected=1 ltu_locked_on_link=0 cpriPort[0].linkOperational=1 cpriPort[1].linkOperational=0
|
267
|
[1970-01-01 00:00:03.972] cpriCtrlProc dataPortDelayMgr.cc:197 INFO:setDataPortStateParam, mPreviouslinkState=(0)->linkStatus=(1), tAdv=(1993), refClock=(0), portNo=(0), syncBit=(0), smgDiff[0]=(0), smgDiff[1]=
|
268
|
(0), mDlLinkDelayComp=(0), mUlLinkDelayComp=(0)
|
269
|
[1970-01-01 00:00:04.036] cpriCtrlProc linkHalIfCpriFpga.cc:135 INFO:comFpgaDelay:3676 [0.1ns]
|
270
|
[1970-01-01 00:00:04.036] cpriCtrlProc linkHalIfCpriFpga.cc:136 INFO:serdesDelay:(33), jbDelay:(1264), hardDelay:(834)
|
271
|
[1970-01-01 00:00:04.036] cpriCtrlProc linkHalIfCpriFpga.cc:140 INFO:RfsDelay:(488.281250 + 162.760417), BfnDelay:(813.802083 + 0.000000), tBfnFabToCalibPortDelay:(80)
|
272
|
[1970-01-01 00:00:04.036] cpriCtrlProc dataPortDelayMgr.cc:963 INFO:Detected setting nominal internal BFN delay for the first time. Saving the value nominalInternalBfnDelay=3676
|
273
|
[1970-01-01 00:00:04.968] XPP_XHP_0_0 xhp_arm_cm.c:2074 INFO:Connected.
|
274
|
[1970-01-01 00:00:04.968] XPP_XHP_0_0 xhp_arm_cm.c:1140 INFO:Connected HDLC address: 2
|
275
|
[1970-01-01 00:00:07.248] startUp fpga.cc:165 INFO:FPGA Application (CXC 112 4243/2 R2G02 20100722) is loaded and started.
|
276
|
[1970-01-01 00:00:07.764] startUp i2cHubIf.cc:102 INFO:Reset has been applied on HUB port 3 of I2C bus. 1 reset(s) after restart/power-up
|
277
|
[1970-01-01 00:00:07.816] startUp i2cHubIf.cc:102 INFO:Reset has been applied on HUB port 0 of I2C bus. 1 reset(s) after restart/power-up
|
278
|
[1970-01-01 00:00:08.784] startUp measChannel.cc:180 INFO:Register redundancy in channel device: TxTemp to device: RxTemp
|
279
|
[1970-01-01 00:00:08.796] startUp measChannel.cc:180 INFO:Register redundancy in channel device: torTemp_x_rus to device: RxTemp
|
280
|
[1970-01-01 00:00:10.756] startUp delayIrqDrv.cc:550 INFO:calibrate: Calibration finished, m_delayOverHeadUs = 42 us
|
281
|
[1970-01-01 00:00:10.972] startUp txIQFilter.cc:114 INFO:fpga write to FPGA_DPD_IQ_MAIN_REG: dpdC0Ivalue(0x10212)dpdC1Ivalue(0x3fdee)dpdC0Qvalue(0xfdee)dpdC1Qvalue(0x212)
|
282
|
[1970-01-01 00:00:10.972] startUp txIQFilter.cc:114 INFO:fpga write to FPGA_DPD_IQ_PEAK_REG: dpdC0Ivalue(0xfe70)dpdC1Ivalue(0x190)dpdC0Qvalue(0x10190)dpdC1Qvalue(0x3fe6f)
|
283
|
[1970-01-01 00:00:11.416] startUp internalGammaCtrl.cc:215 INFO:internalGammaCtrl: InternalGammaCtrl has started, RF port: A, warp: warpA, slave warp: warpB, comFpga: cfpga, dpdFpga: fpga
|
284
|
[1970-01-01 00:00:11.416] startUp internalGammaCtrl.cc:389 INFO:internalGammaCtrl: Requesting BFN resynchronization on warpA_mcr, reason: Start of InternalGammaCtrl
|
285
|
[1970-01-01 00:00:11.416] startUp internalGammaCtrl.cc:395 INFO:internalGammaCtrl: Requesting BFN resynchronization on warpB_mcr, reason: Start of InternalGammaCtrl
|
286
|
[1970-01-01 00:00:11.452] timeOutSrv ltu491Supervision.cc:83 INFO:LTU received lock request, ltu alarm will be checked
|
287
|
[1970-01-01 00:00:11.468] timeOutSrv warp.cc:1541 INFO:ulSyncStbWorkaround BFN OK for warpA after 4 ms (1 iteration(s))
|
288
|
[1970-01-01 00:00:11.484] timeOutSrv warp.cc:1572 INFO:ulSyncStbWorkaround BFN resynchronised OK for warpA after 4 + 16 ms
|
289
|
[1970-01-01 00:00:11.488] timeOutSrv warp.cc:1541 INFO:ulSyncStbWorkaround BFN OK for warpB after 4 ms (1 iteration(s))
|
290
|
[1970-01-01 00:00:11.504] timeOutSrv warp.cc:1572 INFO:ulSyncStbWorkaround BFN resynchronised OK for warpB after 4 + 16 ms
|
291
|
[1970-01-01 00:00:11.656] startUp antenna.cc:461 INFO:RU HW has 2 fixed voltages on feeders and RET port: 17, 30, V
|
292
|
[1970-01-01 00:00:11.656] startUp antenna.cc:462 INFO:The WCDMA default feeder voltage is 17 V when BandVIII
|
293
|
[1970-01-01 00:00:11.672] startUp antenna.cc:1354 INFO:AuxPowerState changed to: eAuxNoSupplyPow
|
294
|
[1970-01-01 00:00:11.672] startUp antenna.cc:1354 INFO:AuxPowerState changed to: eAuxNoResistanceSvPow
|
295
|
[1970-01-01 00:00:11.840] startUp antenna.cc:1354 INFO:AuxPowerState changed to: eAuxNoSupplyPow
|
296
|
[1970-01-01 00:00:11.840] startUp antenna.cc:1354 INFO:AuxPowerState changed to: eAuxNoResistanceSvPow
|
297
|
[1970-01-01 00:00:12.000] startUp paDataBaseCommon.cc:568 INFO:PA DataSource 'DATA_SOURCE_IN_EEPROM' selected.
|
298
|
[1970-01-01 00:00:12.000] startUp paDBDriverStarter.cc:99 INFO:PA DataSource DATA_SOURCE_IN_EEPROM init
|
299
|
[1970-01-01 00:00:12.000] startUp paDataBaseCommon.cc:203 INFO:/isPaConnected not defined, we consider it enabled
|
300
|
[1970-01-01 00:00:12.000] startUp paState.cc:97 INFO:ConnectionState set to true.
|
301
|
[1970-01-01 00:00:12.320] startUp dataBase.cc:1614 INFO:nomPwrComp = -50, noOfTx = 1
|
302
|
[1970-01-01 00:00:12.324] startUp dataBaseIf.cc:2147 INFO:Setting key: /hw/txA/dpd/80W/nomPwr.
|
303
|
[1970-01-01 00:00:12.324] startUp dataBase.cc:1701 INFO:Succeeded to set compensated nomPwr = -800
|
304
|
[1970-01-01 00:00:12.324] startUp dataBase.cc:1740 INFO:Backed off 0 from power values in FreqCorTab
|
305
|
[1970-01-01 00:00:12.324] startUp dataBaseIf.cc:2147 INFO:Setting key: /tor/txA/80W/freqCorTab.
|
306
|
[1970-01-01 00:00:12.324] startUp dataBaseIf.cc:2147 INFO:Setting key: /hw/txA/dpd/60W/nomPwr.
|
307
|
[1970-01-01 00:00:12.324] startUp dataBase.cc:1701 INFO:Succeeded to set compensated nomPwr = -800
|
308
|
[1970-01-01 00:00:12.324] startUp dataBase.cc:1740 INFO:Backed off 0 from power values in FreqCorTab
|
309
|
[1970-01-01 00:00:12.324] startUp dataBaseIf.cc:2147 INFO:Setting key: /tor/txA/60W/freqCorTab.
|
310
|
[1970-01-01 00:00:12.328] startUp dataBaseIf.cc:2147 INFO:Setting key: /hw/txA/dpd/40W/nomPwr.
|
311
|
[1970-01-01 00:00:12.328] startUp dataBase.cc:1701 INFO:Succeeded to set compensated nomPwr = -800
|
312
|
[1970-01-01 00:00:12.328] startUp dataBase.cc:1740 INFO:Backed off 0 from power values in FreqCorTab
|
313
|
[1970-01-01 00:00:12.328] startUp dataBaseIf.cc:2147 INFO:Setting key: /tor/txA/40W/freqCorTab.
|
314
|
[1970-01-01 00:00:12.328] startUp dataBaseIf.cc:2147 INFO:Setting key: /hw/txA/dpd/20W/nomPwr.
|
315
|
[1970-01-01 00:00:12.328] startUp dataBase.cc:1701 INFO:Succeeded to set compensated nomPwr = -800
|
316
|
[1970-01-01 00:00:12.328] startUp dataBase.cc:1740 INFO:Backed off 0 from power values in FreqCorTab
|
317
|
[1970-01-01 00:00:12.328] startUp dataBaseIf.cc:2147 INFO:Setting key: /tor/txA/20W/freqCorTab.
|
318
|
[1970-01-01 00:00:12.328] startUp dataBaseIf.cc:2147 INFO:Setting key: /tx/clipp/threshold/set.
|
319
|
[1970-01-01 00:00:12.328] startUp dataBase.cc:1776 INFO:Dl Clipset compensation, clipset changed from 5 to 6
|
320
|
[1970-01-01 00:00:12.988] startUp vddComp.cc:551 INFO:power level is 0. skip tempCompInit
|
321
|
[1970-01-01 00:00:12.988] startUp vddComp.cc:399 INFO:power level is 0, skip referenceInit().
|
322
|
[1970-01-01 00:00:13.176] startUp halHotSpotImpl.cc:186 INFO:BandVIII 80W:setPoint1[800]
|
323
|
[1970-01-01 00:00:13.180] startUp halHotSpotImpl.cc:186 INFO:BandVIII 80W:setPoint2[700]
|
324
|
[1970-01-01 00:00:13.184] startUp halHotSpotImpl.cc:186 INFO:BandVIII 80W:setPoint3[750]
|
325
|
[1970-01-01 00:00:13.188] startUp startUp.cc:406 INFO:HW initialization completed
|
326
|
[1970-01-01 00:00:13.192] startUp delayHandler.cc:295 INFO:initDelayRunner: DelayFpgaBusyWaitAndIrq
|
327
|
[1970-01-01 00:00:13.192] startUp eqpStartup.cc:106 INFO:EqpStartup initialization start
|
328
|
[1970-01-01 00:00:13.208] startUp externalAlarmSrv.cc:94 INFO:Number of ports: 0
|
329
|
[1970-01-01 00:00:13.208] startUp eqpModule.cc:63 INFO:ExternalAlarmSrvIf Found
|
330
|
[1970-01-01 00:00:13.208] startUp eqpStartup.cc:181 INFO:EqpStartup initialization completed successfully
|
331
|
[1970-01-01 00:00:13.216] faultManagerProc fault_manager.cc:2396 INFO:Set event STARTUP_EVENT to time: 15000[ms], from 0x10005e
|
332
|
[1970-01-01 00:00:13.248] ledProc erciMmi.cc:372 INFO:Vii: 0x00200000
|
333
|
[1970-01-01 00:00:13.248] ledProc erciMmi.cc:372 INFO:Vii: 0x00010000
|
334
|
[1970-01-01 00:00:13.248] ledProc erciMmi.cc:372 INFO:Vii: 0x00000010
|
335
|
[1970-01-01 00:00:13.344] startUp mplSrv.cc:175 INFO:MPL power pooling mode enabled in database
|
336
|
[1970-01-01 00:00:13.520] startUp tempFreqCompEngine.cc:348 INFO:vectorCompInit[mpaCompEngine:A] Frequency Compensation Table ( /hw/VddComp/freqCompTable/tempRef ) does not exist, using PA tables as default
|
337
|
[1970-01-01 00:00:13.528] startUp paSrvPowerLevel.cc:1675 INFO:SPLC is enabled for branch 0
|
338
|
[1970-01-01 00:00:13.816] startUp equalizerComm.cc:155 INFO:Equalizer initialized (numTaps:15, samplFreq:7.68MHz, start-endFreq:-2.50-2.50MHz, numPoints:26)
|
339
|
[1970-01-01 00:00:13.992] startUp txLoSrvLocal.cc:82 INFO:Initial TX LO frequency configured: centerFreq=942500 kHz appliedFreq=centerFreqRasterized+FreqOffset=942480
|
340
|
[1970-01-01 00:00:13.992] startUp txLoSrvLocal.cc:95 INFO:The supervision driver txLoSv is found. Current status: Active
|
341
|
[1970-01-01 00:00:13.996] startUp torLoSrv.cc:119 INFO:Initial TOR LO frequency configured: centerFreq=942500 kHz appliedFreq=centerFreqRasterized+torFreqOffset=957840
|
342
|
[1970-01-01 00:00:13.996] startUp torLoSrv.cc:132 INFO:The supervision driver torLoSv is found. Current status: Active
|
343
|
[1970-01-01 00:00:14.004] startUp pa1Srv.cc:286 INFO:Par set to 75 [/max490/capMaxPar] with powerClassdBm 4900
|
344
|
[1970-01-01 00:00:14.008] startUp pa1Srv.cc:170 INFO:/tx/tempComp does not exist or equals 0. Pa1 board temperature compensation is not enabled on this Radio
|
345
|
[1970-01-01 00:00:14.020] startUp txlIfRequiredDpdMmap.cc:68 INFO:Start getDefaultDriverByKey by key = fpgaReg
|
346
|
[1970-01-01 00:00:14.020] startUp txlIfRequiredFpgaMmap.cc:63 INFO:Start getDefaultDriverByKey by key = fpga
|
347
|
[1970-01-01 00:00:14.024] startUp txlMain.cc:90 INFO:Txl started, name=BranchA, dbBranchName=txA, freqLo=925000[kHz], freqHi=960000[kHz], procName=txlProcBranchA
|
348
|
[1970-01-01 00:00:14.124] startUp dpdController.cc:112 INFO:registering dpdController
|
349
|
[1970-01-01 00:00:14.128] startUp registerAccessor.cc:114 INFO:dpdUsage=fpga removeOffset=0x10000
|
350
|
[1970-01-01 00:00:14.204] startUp dpdController.cc:156 INFO:m_isPeakBranchPresent=1
|
351
|
[1970-01-01 00:00:14.208] startUp configDbDrv.cc:115 INFO:ADDING CFG SET rus01; rus01_BandVII; rus01_BandVII_2; rus01_BandXX; rus01_BandIX; rus01_BandXI; rus01_BandI; rus01_gsm; rus01_gsm_BandII; rus01_gsm_Band
|
352
|
III; rus01_gsm_BandV; arus01_gsm_BandII FOR CXA9
|
353
|
[1970-01-01 00:00:14.208] startUp configDbDrv.cc:115 INFO:ADDING CFG SET rus11; rus11_gsm; rus11_B12_r1; rus11_d1l; rus11_BandVII; rus11_B20; rir11 FOR CXA10
|
354
|
[1970-01-01 00:00:14.212] startUp configDbDrv.cc:132 INFO:CFG FROM DB: rus01;rus01_BandVII;rus01_BandVII_2;rus01_BandXX;rus01_BandIX;rus01_BandXI;rus01_BandI;rus01_gsm;rus01_gsm_BandII;rus01_gsm_BandIII;rus01_g
|
355
|
sm_BandV;arus01_gsm_BandII;rus11;rus11_gsm;rus11_B12_r1;rus11_d1l;rus11_BandVII;rus11_B20;rir11;
|
356
|
[1970-01-01 00:00:14.384] startUp fwDbGen1.cc:219 INFO:PREDICATE MATCH CFG: rus01;rus01_gsm;
|
357
|
[1970-01-01 00:00:14.420] startUp tblDrv.cc:238 INFO:Open txl_tbl CXC 112 xxxx/1-R2B
|
358
|
[1970-01-01 00:00:14.464] startUp tblDrv.cc:322 INFO:Found 12 tables
|
359
|
[1970-01-01 00:00:14.476] startUp dpdController.cc:307 INFO:Configuration initialization completed.
|
360
|
[1970-01-01 00:00:14.476] startUp torStepAttGen1Drv.cc:43 INFO:DBG torStepBit=0x00000009
|
361
|
[1970-01-01 00:00:14.480] startUp iqController.cc:48 INFO:IQ:INIT: mainIQ=-530 peakIQ=400
|
362
|
[1970-01-01 00:00:14.480] startUp dpdController.cc:626 INFO:dgbExist: NO, dgbEnable: NO
|
363
|
[1970-01-01 00:00:14.480] startUp dpdController.cc:2223 INFO:trxDpdInit
|
364
|
[1970-01-01 00:00:14.564] txlProcBranchA ctrlMain.cc:328 INFO:CtrlMainStartup ns:stopped ns:stopped
|
365
|
[1970-01-01 00:00:14.576] startUp paSrvGateBiasing.cc:1080 INFO:DriverInstanceName is tempComp_x2 for branch 0
|
366
|
[1970-01-01 00:00:14.612] startUp paSrvBranch.cc:152 INFO:m_filterMeasNo is hard coded to the default value (5)
|
367
|
[1970-01-01 00:00:14.616] startUp paSrvBranch.cc:259 INFO:m_iterationDelay is hard coded to the default value (5)
|
368
|
[1970-01-01 00:00:14.676] startUp paSrvBranch.cc:1046 INFO:salDlRfFreq:0 (paConfigMode=0: compensate for txLoFreq frequency)
|
369
|
[1970-01-01 00:00:14.676] startUp vddComp.cc:276 INFO:set center freq to 942500 and vector width to 35000
|
370
|
[1970-01-01 00:00:14.680] startUp vddComp.cc:487 INFO:power level equals to powerClass: 20.000000, pci: 3, m_reference: 151, slope: 1
|
371
|
[1970-01-01 00:00:14.684] startUp paSrvVdd.cc:396 INFO:currentVddOffset: 128, targetVddOffset: 40 for branchId 0
|
372
|
[1970-01-01 00:00:14.700] startUp txOverTempCtrl.cc:238 INFO:Periodic reading of temperature sensors started for branch: A. Period: 5000
|
373
|
[1970-01-01 00:00:14.700] startUp eventTraceEngine.cc:129 INFO:subscribed client ID 1
|
374
|
[1970-01-01 00:00:14.700] startUp timeoutFilter.cc:508 INFO:Found TimeoutScheduler instance
|
375
|
[1970-01-01 00:00:14.700] startUp txDiagSrv.cc:118 INFO:Found TimeoutFilter instance
|
376
|
[1970-01-01 00:00:14.780] TxTimingPhaseCtrlA txTimingPhaseCtrl.cc:1388 INFO:DPD delay value: latest(1749 [.1ns]) saved (0 [.1ns]) init (0 [.1ns])
|
377
|
[1970-01-01 00:00:14.976] startUp rxMeasServiceBase.cc:62 INFO:New instance 'Rx::MeasService' variant 'A' for DB 'measService'
|
378
|
[1970-01-01 00:00:14.976] startUp rxMeasServiceBase.cc:62 INFO:New instance 'Rx::MeasService' variant 'B' for DB 'measService'
|
379
|
[1970-01-01 00:00:14.984] startUp rxNbirCtrl.cc:246 INFO:Modularized NBIR disabled
|
380
|
[1970-01-01 00:00:15.344] startUp ricrai.c:556 INFO:added internal ricr subscriber, type 1
|
381
|
[1970-01-01 00:00:15.344] cpriCtrlProc linkCtrlCpriBase.cc:116 INFO:RICRAI_UPDATE_DELAY2_IND,recToReDelay:0, portNo:0
|
382
|
[1970-01-01 00:00:15.344] cpriCtrlProc warp1xUlDelayBlock.cc:98 INFO:warpAsicA: Setting bfnTimeDelay: 0, maxBfnTime: 307200, ricrTrpRuDelay: 0
|
383
|
[1970-01-01 00:00:15.344] cpriCtrlProc warp1xUlDelayBlock.cc:110 INFO:warpAsicB: Setting bfnTimeDelay: 0, maxBfnTime: 307200, ricrTrpRuDelay: 0
|
384
|
[1970-01-01 00:00:15.344] cpriCtrlProc linkCtrlCpriBase.cc:116 INFO:RICRAI_UPDATE_DELAY2_IND,recToReDelay:0, portNo:1
|
385
|
[1970-01-01 00:00:15.364] startUp rxMcrLoService.cc:160 INFO:ABN: unable to get instance of rxRfLoSv driver
|
386
|
[1970-01-01 00:00:15.388] startUp rxFrontEndServiceRus.cc:118 INFO:serviceVariant: A, setCrossConnectDirection(OFF)
|
387
|
[1970-01-01 00:00:15.400] startUp rxFrontEndServiceRus.cc:104 INFO:serviceVariant: A, setAttenuator(ON)
|
388
|
[1970-01-01 00:00:15.408] startUp rxFrontEndServiceRus.cc:111 INFO:serviceVariant: A, setByPass(ON)
|
389
|
[1970-01-01 00:00:15.492] startUp rxFrontEndServiceRus.cc:118 INFO:serviceVariant: B, setCrossConnectDirection(OFF)
|
390
|
[1970-01-01 00:00:15.508] startUp rxFrontEndServiceRus.cc:104 INFO:serviceVariant: B, setAttenuator(ON)
|
391
|
[1970-01-01 00:00:15.516] startUp rxFrontEndServiceRus.cc:111 INFO:serviceVariant: B, setByPass(ON)
|
392
|
[1970-01-01 00:00:15.700] startUp rxDynAgcService.cc:265 INFO:AGC dynamic release is enabled
|
393
|
[1970-01-01 00:00:15.712] startUp rxDynAgcService.cc:265 INFO:AGC dynamic release is enabled
|
394
|
[1970-01-01 00:00:15.720] startUp rxSyncStrobeService.cc:338 INFO:UL Sync Strobe BFN OK for warpA after 4 ms (1 iteration(s))
|
395
|
[1970-01-01 00:00:15.736] startUp rxSyncStrobeService.cc:247 INFO:ul Sync Strobe BFN resynchronized OK for warpA after 4 + 16 ms
|
396
|
[1970-01-01 00:00:15.740] startUp rxSyncStrobeService.cc:338 INFO:UL Sync Strobe BFN OK for warpB after 4 ms (1 iteration(s))
|
397
|
[1970-01-01 00:00:15.756] startUp rxSyncStrobeService.cc:247 INFO:ul Sync Strobe BFN resynchronized OK for warpB after 4 + 16 ms
|
398
|
[1970-01-01 00:00:15.756] startUp timeoutFilter.cc:508 INFO:Found TimeoutScheduler instance
|
399
|
[1970-01-01 00:00:15.756] startUp rxDiagService.cc:113 INFO:Found TimeoutFilter instance
|
400
|
[1970-01-01 00:00:15.756] startUp rxDiagService.cc:113 INFO:Found TimeoutFilter instance
|
401
|
[1970-01-01 00:00:15.816] startUp ulDelayEventSubscriber.cc:119 INFO:sizeOfCoarseUl not found in DB, using default value of 0 [samples]
|
402
|
[1970-01-01 00:00:15.828] startUp lrciANUPortMeasImpl.cc:255 INFO:LRCI currentMeas 0 1
|
403
|
[1970-01-01 00:00:15.880] startUp eventTraceEngine.cc:129 INFO:subscribed client ID 2
|
404
|
[1970-01-01 00:00:15.904] startUp objectStartUp.cc:55 INFO:Initialization of resource
|
405
|
[1970-01-01 00:00:15.904] startUp objectStartUp.cc:83 INFO:objectStartUp initialization completed successfully
|
406
|
[1970-01-01 00:00:15.916] RxBranchCtrlA lna4Supervision.cc:77 INFO:lna4A1ChSv: LNA 4 supervision stopped
|
407
|
[1970-01-01 00:00:15.916] RxBranchCtrlA rxGainBranchCtrl.cc:863 INFO:Gain target branch A: 1700 [dB*100]
|
408
|
[1970-01-01 00:00:15.920] RxBranchCtrlA rxFrontEndServiceRus.cc:118 INFO:serviceVariant: A, setCrossConnectDirection(OFF)
|
409
|
[1970-01-01 00:00:15.924] TmaSvProc lrciANUPortMeasImpl.cc:255 INFO:LRCI currentMeas 1 1
|
410
|
[1970-01-01 00:00:15.928] RxBranchCtrlA rxFrontEndServiceRus.cc:104 INFO:serviceVariant: A, setAttenuator(OFF)
|
411
|
[1970-01-01 00:00:15.928] ResistanceSvProc lrciANUPortMeasImpl.cc:255 INFO:LRCI currentMeas 1 1
|
412
|
[1970-01-01 00:00:15.932] RxBranchCtrlA rxFrontEndServiceRus.cc:111 INFO:serviceVariant: A, setByPass(OFF)
|
413
|
[1970-01-01 00:00:15.932] RefPowSvProc refPow_Supervision_proc.cc:87 INFO:Reflected power supervision: not supported on this RU, exit
|
414
|
[1970-01-01 00:00:15.932] VSWRSvProc VSWR_Supervision_proc.cc:184 INFO:VSWRMeasSupervision has now started with 1 supervision units, sv period: 5000
|
415
|
[1970-01-01 00:00:15.936] CurrMeasProc lrciANUPortMeasImpl.cc:255 INFO:LRCI currentMeas 1 1
|
416
|
[1970-01-01 00:00:15.940] FeederConnectivitySvProc lrciANUPortMeasImpl.cc:255 INFO:LRCI currentMeas 1 1
|
417
|
[1970-01-01 00:00:15.944] portOverloadSvProc lrciANUPortMeasImpl.cc:255 INFO:LRCI currentMeas 1 1
|
418
|
[1970-01-01 00:00:15.944] currentSvProc lrciANUPortMeasImpl.cc:255 INFO:LRCI currentMeas 1 1
|
419
|
[1970-01-01 00:00:15.980] RxBranchCtrlA lna4Supervision.cc:77 INFO:lna4A1ChSv: LNA 4 supervision stopped
|
420
|
[1970-01-01 00:00:15.980] RxBranchCtrlA lna4Supervision.cc:77 INFO:lna4A1ChSv: LNA 4 supervision stopped
|
421
|
[1970-01-01 00:00:15.980] startUp crossConnectImpl.cc:665 INFO:RX RF port settings: RXA I/O: O; cable supervision OFF
|
422
|
[1970-01-01 00:00:15.980] startUp crossConnectImpl.cc:665 INFO:RX RF port settings: RXB I/O: O; cable supervision OFF
|
423
|
[1970-01-01 00:00:15.984] RxBranchCtrlB lna4Supervision.cc:77 INFO:lna4B1ChSv: LNA 4 supervision stopped
|
424
|
[1970-01-01 00:00:15.984] RxBranchCtrlB rxGainBranchCtrl.cc:863 INFO:Gain target branch B: 1700 [dB*100]
|
425
|
[1970-01-01 00:00:15.988] RxBranchCtrlB rxFrontEndServiceRus.cc:118 INFO:serviceVariant: B, setCrossConnectDirection(OFF)
|
426
|
[1970-01-01 00:00:15.992] RxBranchCtrlB rxFrontEndServiceRus.cc:104 INFO:serviceVariant: B, setAttenuator(OFF)
|
427
|
[1970-01-01 00:00:15.996] RxBranchCtrlB rxFrontEndServiceRus.cc:111 INFO:serviceVariant: B, setByPass(OFF)
|
428
|
[1970-01-01 00:00:16.036] RxBranchCtrlB lna4Supervision.cc:77 INFO:lna4B1ChSv: LNA 4 supervision stopped
|
429
|
[1970-01-01 00:00:16.088] bcProc ccieLteInterface.cc:103 INFO:SAR:Published interface: BcServer(0x1000a1) and BCI(highestProtocolRev:3(0x3),proto_basic:0,proto_spec:3),dispatchPid_: 0x10006e
|
430
|
[1970-01-01 00:00:16.128] trDcProc ccieLteInterface.cc:103 INFO:SAR:Published interface: radioTrDcServer(0x1000a5) and TR-DCI(highestProtocolRev:65543(0x10007),proto_basic:1,proto_spec:7),dispatchPid_: 0x1000a2
|
431
|
[1970-01-01 00:00:16.164] cbcRuProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
432
|
[1970-01-01 00:00:16.172] bcProc ccieLteSession.cc:424 INFO:EVT:State change,interface:BCI,server ref:101,connection state:NOT_CONNECTED->CONNECTED
|
433
|
[1970-01-01 00:00:16.172] ledProc erciMmi.cc:372 INFO:Vii: 0x00100000
|
434
|
[1970-01-01 00:00:16.172] bcProc bcRu.cc:495 INFO:ELIB_BC_GET_CAPABILITIES_REQ: clientRef: 99, serverRef: 101
|
435
|
[1970-01-01 00:00:16.172] XPP_XMMI xmmi.c:630 INFO:WARNING: LED0 is not configured/available.
|
436
|
[1970-01-01 00:00:16.188] bcProc lteMmiResource.cc:286 INFO:MMI type set: RBS6000
|
437
|
[1970-01-01 00:00:16.188] ledProc erciMmi.cc:372 INFO:Vii: 0x00000010
|
438
|
[1970-01-01 00:00:16.192] antpServerProc_ ccieLteInterface.cc:103 INFO:SAR:Published interface: antpServer(0x1000a6) and ANTPI(highestProtocolRev:4(0x4),proto_basic:0,proto_spec:4),dispatchPid_: 0x1000a4
|
439
|
[1970-01-01 00:00:16.212] bcProc bcRu.cc:495 INFO:ELIB_BC_GET_CAPABILITIES_REQ: clientRef: 1, serverRef: 101
|
440
|
[1970-01-01 00:00:16.212] XPP_XMMI xmmi.c:630 INFO:WARNING: LED0 is not configured/available.
|
441
|
[1970-01-01 00:00:16.220] swStoreHandler lteSwStoreResource.cc:859 INFO:acquire resource SW_STORE (1) has been accepted
|
442
|
[1970-01-01 00:00:16.220] swStoreHandler swStoreResource.cc:1503 INFO:Compatible list file found for swPid CXP901096%12_R27KB: NO
|
443
|
[1970-01-01 00:00:16.228] swStoreHandler swStoreResource.cc:1499 INFO:Compatible list file found for swPid CXP9017316%1_R39UG: YES
|
444
|
[1970-01-01 00:00:16.232] swStoreHandler swStoreResource.cc:1499 INFO:Compatible list file found for swPid CXP9013268%6_R63DN: YES
|
445
|
[1970-01-01 00:00:16.240] swStoreHandler lteSwStoreResource.cc:282 INFO:GetRunningLoadModule:CXP9013268%6_R63DN
|
446
|
[1970-01-01 00:00:16.244] ledProc erciMmi.cc:372 INFO:Vii: 0x00000100
|
447
|
[1970-01-01 00:00:16.244] bcLoadHandler swStoreResource.cc:592 INFO:Start initiate the loading ELIB_BC_LOAD_LMC_INIT_REQ: loadModule (PID) = CXP9013268%6_R63DN
|
448
|
[1970-01-01 00:00:16.244] XPP_XCBC xcbc.c:2034 INFO:Warning: Load LM init failed. Reason: WRONG_CONFIGURATION_DATA (4)
|
449
|
[1970-01-01 00:00:16.248] ledProc erciMmi.cc:372 INFO:Vii: 0x01000000
|
450
|
[1970-01-01 00:00:16.268] cbcRuProc ccieInterface.cc:84 INFO:SAR:Published interface: XcbcServer(0x2000a7) and RUW-CBCI(highestProtocolRev:260),dispatchPid_: 0x10006f
|
451
|
[1970-01-01 00:00:16.268] cbcRuProc cbcRuw.cc:236 INFO:RUS 01 B8 SW started
|
452
|
[1970-01-01 00:00:16.268] swStoreHandler lteSwStoreResource.cc:917 INFO:release resource SW_STORE (1) has been accepted
|
453
|
[1970-01-01 00:00:16.272] bcProc bcRu.cc:495 INFO:ELIB_BC_GET_CAPABILITIES_REQ: clientRef: 2, serverRef: 101
|
454
|
[1970-01-01 00:00:16.272] XPP_XMMI xmmi.c:630 INFO:WARNING: LED0 is not configured/available.
|
455
|
[1970-01-01 00:00:16.280] cbcRuProc cbcProc.cc:147 INFO:Starting O&M interfaces
|
456
|
[1970-01-01 00:00:16.284] bcProc ccieLteSession.cc:440 INFO:EVT:State change,interface:BCI,server ref:101,O&M state:STARTING->OPERATIONAL
|
457
|
[1970-01-01 00:00:16.320] trProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
458
|
[1970-01-01 00:00:16.352] trProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
459
|
[1970-01-01 00:00:16.380] trProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
460
|
[1970-01-01 00:00:16.384] rotProc ccieInterface.cc:84 INFO:SAR:Published interface: rotIdcServer(0x1000ad) and ROT-IDCI(highestProtocolRev:65535),dispatchPid_: 0x1000a9
|
461
|
[1970-01-01 00:00:16.408] trProc ccieInterface.cc:84 INFO:SAR:Published interface: TRX_CDCI_FT(0x1000ae) and TR-CDCI(highestProtocolRev:42),dispatchPid_: 0x1000a8
|
462
|
[1970-01-01 00:00:16.444] dpclProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
463
|
[1970-01-01 00:00:16.456] aiProc ccieInterface.cc:84 INFO:SAR:Published interface: aiServer(0x1000af) and AI-CDCI(highestProtocolRev:302),dispatchPid_: 0x1000ab
|
464
|
[1970-01-01 00:00:16.460] tpaProc ccieInterface.cc:84 INFO:SAR:Published interface: tpasCdciServer(0x1000b0) and TPA-CDCI(highestProtocolRev:301),dispatchPid_: 0x1000ac
|
465
|
[1970-01-01 00:00:16.464] maintStateHandler lteMaintStateResource.cc:296 INFO:Maintenance State event: ELIB_BC_MAINT_STATE_MAINT_DEACTIVATED
|
466
|
[1970-01-01 00:00:16.464] dpclProc ccieInterface.cc:84 INFO:SAR:Published interface: dpclServer(0x1000b3) and DPCL-CDCI(highestProtocolRev:11),dispatchPid_: 0x1000aa
|
467
|
[1970-01-01 00:00:16.496] bcProc bcRu.cc:759 INFO:ELIB_BC_TEMP_MEAS_START_REQ: clientRef: 2, serverRef: 101, hotSpotMeasurementPeriod: 1
|
468
|
[1970-01-01 00:00:16.500] antpServerProc_ ccieLteSession.cc:424 INFO:EVT:State change,interface:ANTPI,server ref:102,connection state:Communication Not Initiated->Protocol Revision Negotiated
|
469
|
[1970-01-01 00:00:16.500] antpServerProc_ ccieLteSession.cc:440 INFO:EVT:State change,interface:ANTPI,server ref:102,O&M state:STARTING->OPERATIONAL
|
470
|
[1970-01-01 00:00:16.504] trDcProc cfheFaultHandler.cc:4508 INFO:TR-DCI Session Connected, support for linearization fault: 1
|
471
|
[1970-01-01 00:00:16.504] trDcProc ccieLteSession.cc:424 INFO:EVT:State change,interface:TR-DCI,server ref:103,connection state:NOT_CONNECTED->CONNECTED
|
472
|
[1970-01-01 00:00:16.504] trDcProc ccieLteSession.cc:440 INFO:EVT:State change,interface:TR-DCI,server ref:103,O&M state:STARTING->OPERATIONAL
|
473
|
[1970-01-01 00:00:16.504] RICR nci_control.c:2258 INFO:Interface RICI: state transition from Not connected to Connected
|
474
|
[1970-01-01 00:00:16.504] RICR nci_control.c:2294 INFO:handle_conn_establish: RICI_CONN_ESTABLISH_REQ(protocolRev: 3, ruId: 0) from 0x1000b6: returning RICI_CONN_ESTABLISH_CFM
|
475
|
[1970-01-01 00:00:16.508] antpServerProc_ ccieLteSession.cc:424 INFO:EVT:State change,interface:ANTPI,server ref:102,connection state:Protocol Revision Negotiated->Capability Info Exchanged
|
476
|
[1970-01-01 00:00:16.508] antpServerProc_ ruAntp.cc:374 INFO:ANTP_GET_CAPABILITIES_REQ: clientRef: 0, serverRef: 102
|
477
|
[1970-01-01 00:00:16.552] RICR rici_appl.c:392 INFO:handle_get_capabilities: RICI_GET_CAPABILITY_REQ from 0x1000b6: returning RICI_GET_CAPABILITY_CFM: Capabilities part 1: SFP info: supported; delay handling: s
|
478
|
upported; no of cascade ports: 1; reset link handling: supported; get current port: supported; delay handling 2: supported; specific hw: none; port aware cpri: supported; carrier handling: not supported; ECP co
|
479
|
nfig: 1 extra address supported; port pair: supported; CPRI obs.: supported.
|
480
|
[1970-01-01 00:00:16.552] RICR rici_appl.c:413 INFO: Capabilities part 2: support 4.9G: not supported; support 9.8G: not supported; select sync port: supported; subscribe: supported; subscribe fault: supported;
|
481
|
subscribe sync port: supported; delay handling 3: supported; 2way cpri link: not supported; 2way cpri delays: not supported; 2way alloc ranges: supported; SFP info2: supported.
|
482
|
[1970-01-01 00:00:16.552] RICR rici_appl.c:425 INFO: Capabilities part 3: subscribe port: supported; MM port status: supported; getFreqDiff: supported; getRfsDiff: supported; getFreqDiff2: supported.
|
483
|
[1970-01-01 00:00:16.572] RICR nci_control.c:2498 INFO:handle_subscribe_fault: Got RICI_SUBSCRIBE_FAULT_REQ from 0x001000b6, returning RICI_SUBSCRIBE_FAULT_CFM(ruId = 0)
|
484
|
[1970-01-01 00:00:16.588] RICR rici_appl.c:392 INFO:handle_get_capabilities: RICI_GET_CAPABILITY_REQ from 0x1000b6: returning RICI_GET_CAPABILITY_CFM: Capabilities part 1: SFP info: supported; delay handling: s
|
485
|
upported; no of cascade ports: 1; reset link handling: supported; get current port: supported; delay handling 2: supported; specific hw: none; port aware cpri: supported; carrier handling: not supported; ECP co
|
486
|
nfig: 1 extra address supported; port pair: supported; CPRI obs.: supported.
|
487
|
[1970-01-01 00:00:16.588] RICR rici_appl.c:413 INFO: Capabilities part 2: support 4.9G: not supported; support 9.8G: not supported; select sync port: supported; subscribe: supported; subscribe fault: supported;
|
488
|
subscribe sync port: supported; delay handling 3: supported; 2way cpri link: not supported; 2way cpri delays: not supported; 2way alloc ranges: supported; SFP info2: supported.
|
489
|
[1970-01-01 00:00:16.588] RICR rici_appl.c:425 INFO: Capabilities part 3: subscribe port: supported; MM port status: supported; getFreqDiff: supported; getRfsDiff: supported; getFreqDiff2: supported.
|
490
|
[1970-01-01 00:00:16.596] RICR rici_appl.c:392 INFO:handle_get_capabilities: RICI_GET_CAPABILITY_REQ from 0x1000b6: returning RICI_GET_CAPABILITY_CFM: Capabilities part 1: SFP info: supported; delay handling: s
|
491
|
upported; no of cascade ports: 1; reset link handling: supported; get current port: supported; delay handling 2: supported; specific hw: none; port aware cpri: supported; carrier handling: not supported; ECP co
|
492
|
nfig: 1 extra address supported; port pair: supported; CPRI obs.: supported.
|
493
|
[1970-01-01 00:00:16.596] RICR rici_appl.c:413 INFO: Capabilities part 2: support 4.9G: not supported; support 9.8G: not supported; select sync port: supported; subscribe: supported; subscribe fault: supported;
|
494
|
subscribe sync port: supported; delay handling 3: supported; 2way cpri link: not supported; 2way cpri delays: not supported; 2way alloc ranges: supported; SFP info2: supported.
|
495
|
[1970-01-01 00:00:16.596] RICR rici_appl.c:425 INFO: Capabilities part 3: subscribe port: supported; MM port status: supported; getFreqDiff: supported; getRfsDiff: supported; getFreqDiff2: supported.
|
496
|
[1970-01-01 00:00:16.596] RICR nci_control.c:2593 INFO:handle_get_current_port: RICI_GET_CURRENT_PORT_REQ from 0x001000b6: returning RICI_GET_CURRENT_PORT_CFM(ruId:0, portNo:0)
|
497
|
[1970-01-01 00:00:16.596] RICR nci_control.c:2593 INFO:handle_get_current_port: RICI_GET_CURRENT_PORT_REQ from 0x001000b6: returning RICI_GET_CURRENT_PORT_CFM(ruId:0, portNo:0)
|
498
|
[1970-01-01 00:00:16.616] hwLogWriteProc hwLogWrite.cc:490 INFO:HW log write filtered, HW log id (000), HW log text: G not available;Site not available;Shelf:255;Position:255
|
499
|
[1970-01-01 00:00:16.620] hwLogWriteProc hwLogWrite.cc:342 INFO:HW log node configuration data updated,HW log id (2), HW log text: G UP CXP1040013_16R87F, ref (101)
|
500
|
[1970-01-01 00:00:16.624] trDcProc trDcServer.cc:1615 INFO:DC_TRS_GET_CAPABILITIES_REQ, clientRef:1, serverRef:103, ratType:2
|
501
|
[1970-01-01 00:00:16.656] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
502
|
[1970-01-01 00:00:16.712] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
503
|
[1970-01-01 00:00:16.744] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
504
|
[1970-01-01 00:00:16.780] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
505
|
[1970-01-01 00:00:16.800] antpServerProc_ ruAntp.cc:374 INFO:ANTP_GET_CAPABILITIES_REQ: clientRef: 4, serverRef: 102
|
506
|
[1970-01-01 00:00:16.804] antpServerProc_ ruAntp.cc:436 INFO:ANTP_GET_DEVICE_CAPABILITIES_REQ: clientRef: 4, serverRef: 102, deviceId: 0
|
507
|
[1970-01-01 00:00:16.804] antpServerProc_ ../inc/ruAntpDevice.h:470 INFO:Client: ClientId: Raw ID = 102 (LTE/GSM) changed state from: ANTPI_DEVICE_STATE_DEFINED to : ANTPI_DEVICE_STATE_CAPABILITY_INFO_EXCHANGED
|
508
|
for devId: 0
|
509
|
[1970-01-01 00:00:16.804] antpServerProc_ ruAntp.cc:436 INFO:ANTP_GET_DEVICE_CAPABILITIES_REQ: clientRef: 4, serverRef: 102, deviceId: 1
|
510
|
[1970-01-01 00:00:16.804] antpServerProc_ ../inc/ruAntpDevice.h:470 INFO:Client: ClientId: Raw ID = 102 (LTE/GSM) changed state from: ANTPI_DEVICE_STATE_DEFINED to : ANTPI_DEVICE_STATE_CAPABILITY_INFO_EXCHANGED
|
511
|
for devId: 1
|
512
|
[1970-01-01 00:00:16.804] antpServerProc_ ruAntp.cc:667 INFO:ANTP_VSWR_MEAS_REQ: clientRef: 4, serverRef: 102, deviceId: 0, startStop: 1
|
513
|
[1970-01-01 00:00:16.812] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
514
|
[1970-01-01 00:00:16.844] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
515
|
[1970-01-01 00:00:16.892] ledProc erciMmi.cc:372 INFO:Vii: 0x00010000
|
516
|
[1970-01-01 00:00:17.996] ledProc erciMmi.cc:372 INFO:Vii: 0x00100000
|
517
|
[1970-01-01 00:00:17.996] ledProc erciMmi.cc:372 INFO:Vii: 0x00100000
|
518
|
[1970-01-01 00:00:17.996] ledProc erciMmi.cc:372 INFO:Vii: 0x00000010
|
519
|
[1970-01-01 00:00:18.000] XDP_XDMMI xdmmi.c:609 INFO:new maintenance state equals current state (XDAI_MAINTENANCE_STATE_DEACTIVATED)
|
520
|
[1970-01-01 00:04:39.964] trDcProc trDcServer.cc:1615 INFO:DC_TRS_GET_CAPABILITIES_REQ, clientRef:2, serverRef:103, ratType:2
|
521
|
[1970-01-01 00:04:39.996] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
522
|
[1970-01-01 00:04:40.044] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
523
|
[1970-01-01 00:04:40.080] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
524
|
[1970-01-01 00:04:40.112] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
525
|
[1970-01-01 00:04:40.136] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
526
|
[1970-01-01 00:04:40.168] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
527
|
[1970-01-01 00:04:41.412] trDcProc trDcServer.cc:1615 INFO:DC_TRS_GET_CAPABILITIES_REQ, clientRef:2, serverRef:103, ratType:2
|
528
|
[1970-01-01 00:04:41.440] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
529
|
[1970-01-01 00:04:41.488] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
530
|
[1970-01-01 00:04:41.524] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
531
|
[1970-01-01 00:04:41.556] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
532
|
[1970-01-01 00:04:41.584] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
533
|
[1970-01-01 00:04:41.612] trDcProc lrciRasCapabilities.cc:527 INFO:reportGainError = 1, reportPAR = 1, reportTempCrBackoff = 0, reportCarrierBackoff = 1, reportAuxiliaryFilter = 1
|
534
|
[1970-01-01 00:21:20.532] Sys_OMCSF_teLogMain xte_log.c:662 INFO:The log has been freezed
|
535
|
|