Open Source Mobile Communications: Issueshttps://osmocom.org/https://osmocom.org/favicon.ico?16647414092023-07-10T20:22:57ZOpen Source Mobile Communications
Redmine OsmoHNBGW - Bug #6093 (Resolved): Some TTCN3 tests, including TC_rab_assignment faile due to prob...https://osmocom.org/issues/60932023-07-10T20:22:57Zdexter
<p>There is a problem with MGCP that prevents TC_rab_assignment from passing: Osmo-mgcp-client now checks if the payload type / codec name we get back from the MGW actually makes sense. Since we use 23 as payload type and "FOO" as codec name in the MGW emulation of the TTCN3 testsuite, this gets rejected. We must use a more realistic payload type / codec name.</p> OsmoMGW - Bug #5984 (Closed): fix regression in TC_two_crcx_and_one_mdcx_rtp_hohttps://osmocom.org/issues/59842023-03-29T20:00:42Zdexter
<p>TC_two_crcx_and_one_mdcx_rtp_ho fails with reason: "RTP packets received while RX was disabled"</p> OsmoBTS - Bug #5645 (Resolved): osmo-bts-trx crashes when using gsmtap option -ihttps://osmocom.org/issues/56452022-08-15T12:48:31Zdexter
<p>When osmo-bts-trx is started with option -i (osmo-bts-trx -c ./osmo-bts.cfg -i 127.0.0.1), then it fails with SIGABRT (or Segmentation Fault without GDB). The problem is most likely related to an msgb that is too small.</p>
<pre>
Mon Aug 15 14:43:21 2022 <0001> nm_channel_fsm.c:152 NM_CHAN_OP(bts0-trx0-ts5)[0x55555576f660]{DISABLED_OFFLINE}: state_chg to ENABLED
Mon Aug 15 14:43:21 2022 <0001> oml.c:354 OC=CHANNEL INST=(00,00,05) AVAIL STATE Off line -> OK
Mon Aug 15 14:43:21 2022 <0001> oml.c:362 OC=CHANNEL INST=(00,00,05) OPER STATE Disabled -> Enabled
Mon Aug 15 14:43:21 2022 <0009> pcu_sock.c:242 Sending info
Mon Aug 15 14:43:21 2022 <0009> pcu_sock.c:257 BTS is up
Mon Aug 15 14:43:21 2022 <0001> oml.c:144 OC=CHANNEL(03) INST=(00,00,05): Tx State Changed Event Report
Mon Aug 15 14:43:21 2022 <0011> input/ipa.c:139 127.0.0.1:3002 connected write
Mon Aug 15 14:43:21 2022 <0011> input/ipa.c:139 127.0.0.1:3002 connected write
Mon Aug 15 14:43:21 2022 <0011> input/ipa.c:135 127.0.0.1:3002 connected read
Mon Aug 15 14:43:21 2022 <0011> input/ipa.c:56 127.0.0.1:3002 message received
Mon Aug 15 14:43:21 2022 <0001> oml.c:1017 OC=CHANNEL(03) INST=(00,00,06): Rx OPSTART
Mon Aug 15 14:43:21 2022 <0001> l1_if.c:588 NM_CHAN_OP(bts0-trx0-ts6)[0x55555576fcb0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK
Mon Aug 15 14:43:21 2022 <0001> oml.c:144 OC=CHANNEL(03) INST=(00,00,06): Tx Opstart Ack
Mon Aug 15 14:43:21 2022 <0001> nm_channel_fsm.c:152 NM_CHAN_OP(bts0-trx0-ts6)[0x55555576fcb0]{DISABLED_OFFLINE}: state_chg to ENABLED
Mon Aug 15 14:43:21 2022 <0001> oml.c:354 OC=CHANNEL INST=(00,00,06) AVAIL STATE Off line -> OK
Mon Aug 15 14:43:21 2022 <0001> oml.c:362 OC=CHANNEL INST=(00,00,06) OPER STATE Disabled -> Enabled
Mon Aug 15 14:43:21 2022 <0009> pcu_sock.c:242 Sending info
Mon Aug 15 14:43:21 2022 <0009> pcu_sock.c:257 BTS is up
Mon Aug 15 14:43:21 2022 <0001> oml.c:144 OC=CHANNEL(03) INST=(00,00,06): Tx State Changed Event Report
Mon Aug 15 14:43:21 2022 <0011> input/ipa.c:139 127.0.0.1:3002 connected write
Mon Aug 15 14:43:21 2022 <0011> input/ipa.c:139 127.0.0.1:3002 connected write
Mon Aug 15 14:43:21 2022 <0011> input/ipa.c:139 127.0.0.1:3002 connected write
Mon Aug 15 14:43:21 2022 <0011> input/ipa.c:135 127.0.0.1:3002 connected read
Mon Aug 15 14:43:21 2022 <0011> input/ipa.c:56 127.0.0.1:3002 message received
Mon Aug 15 14:43:21 2022 <0001> oml.c:1017 OC=CHANNEL(03) INST=(00,00,07): Rx OPSTART
Mon Aug 15 14:43:21 2022 <0001> l1_if.c:588 NM_CHAN_OP(bts0-trx0-ts7)[0x555555770300]{DISABLED_OFFLINE}: Received Event OPSTART_ACK
Mon Aug 15 14:43:21 2022 <0001> oml.c:144 OC=CHANNEL(03) INST=(00,00,07): Tx Opstart Ack
Mon Aug 15 14:43:21 2022 <0001> nm_channel_fsm.c:152 NM_CHAN_OP(bts0-trx0-ts7)[0x555555770300]{DISABLED_OFFLINE}: state_chg to ENABLED
Mon Aug 15 14:43:21 2022 <0001> oml.c:354 OC=CHANNEL INST=(00,00,07) AVAIL STATE Off line -> OK
Mon Aug 15 14:43:21 2022 <0001> oml.c:362 OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Enabled
Mon Aug 15 14:43:21 2022 <0009> pcu_sock.c:242 Sending info
Mon Aug 15 14:43:21 2022 <0009> pcu_sock.c:257 BTS is up
Mon Aug 15 14:43:21 2022 <0009> pcu_sock.c:221 (bts=0,trx=0) PDCH on ts=7 is available (tsc=6 hopping=no arfcn=868)
Mon Aug 15 14:43:21 2022 <0001> oml.c:144 OC=CHANNEL(03) INST=(00,00,07): Tx State Changed Event Report
Mon Aug 15 14:43:21 2022 <0011> input/ipa.c:139 127.0.0.1:3002 connected write
Mon Aug 15 14:43:21 2022 <0009> pcu_sock.c:863 Activate request received: TRX=0 TS=7
Mon Aug 15 14:43:21 2022 <0006> l1sap.c:1942 (bts=0,trx=0,ts=7,ss=0) Activating channel PDCH on TS7
Mon Aug 15 14:43:21 2022 <0006> scheduler.c:1099 (bts=0,trx=0,ts=7,ss=0) Activating PDTCH
Mon Aug 15 14:43:21 2022 <0006> scheduler.c:1099 (bts=0,trx=0,ts=7,ss=0) Activating PTCCH
Mon Aug 15 14:43:21 2022 <0006> lchan.c:271 (bts=0,trx=0,ts=7,ss=0) state NONE -> ACTIVE
Mon Aug 15 14:43:21 2022 <0006> l1sap.c:837 (bts=0,trx=0,ts=7,ss=0) activate confirm chan_nr=PDCH on TS7 trx=0
Mon Aug 15 14:43:21 2022 <0000> rsl.c:1389 (bts=0,trx=0,ts=7,ss=0) not sending CHAN ACT ACK
Mon Aug 15 14:43:21 2022 <0011> input/ipa.c:139 127.0.0.1:3002 connected write
Mon Aug 15 14:43:21 2022 <0009> pcu_sock.c:448 Sending rts request: is_ptcch=0 arfcn=868 block=11
Mon Aug 15 14:43:21 2022 <0009> pcu_sock.c:680 Data request received: sapi=PDTCH arfcn=868 block=11 data=
msgb(0x5555558a3a30): Not enough tailroom msgb_put (allocated 52904, head at 0, len 16, tailroom 53024 < want tailroom 1432604448)
backtrace() returned 22 addresses
/usr/local/lib/libosmocore.so.19(osmo_generate_backtrace+0x18) [0x7ffff7e15e23]
/usr/local/lib/libosmocore.so.19(+0x29b01) [0x7ffff7e15b01]
/usr/local/lib/libosmocore.so.19(osmo_panic+0xca) [0x7ffff7e15bd0]
/usr/local/lib/libosmocore.so.19(+0x28fd0) [0x7ffff7e14fd0]
/usr/local/lib/libosmocore.so.19(gsmtap_makemsg_ex+0x110) [0x7ffff7e1533f]
/usr/local/lib/libosmocore.so.19(gsmtap_send_ex+0x88) [0x7ffff7e1563e]
/usr/local/lib/libosmocore.so.19(gsmtap_send+0x79) [0x7ffff7e156fa]
/usr/local/bin/osmo-bts-trx(+0x51806) [0x5555555a5806]
/usr/local/bin/osmo-bts-trx(+0x56493) [0x5555555aa493]
/usr/local/bin/osmo-bts-trx(+0x566c4) [0x5555555aa6c4]
/usr/local/bin/osmo-bts-trx(+0x4998e) [0x55555559d98e]
/usr/local/bin/osmo-bts-trx(+0x4a740) [0x55555559e740]
/usr/local/bin/osmo-bts-trx(+0x4b174) [0x55555559f174]
/usr/local/bin/osmo-bts-trx(+0x4b3b9) [0x55555559f3b9]
/usr/local/lib/libosmocore.so.19(+0x1082c) [0x7ffff7dfc82c]
/usr/local/lib/libosmocore.so.19(+0x10939) [0x7ffff7dfc939]
/usr/local/lib/libosmocore.so.19(osmo_select_main+0x15) [0x7ffff7dfc955]
/usr/local/bin/osmo-bts-trx(+0x5a5f1) [0x5555555ae5f1]
/usr/local/bin/osmo-bts-trx(+0xd5ed) [0x5555555615ed]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xeb) [0x7ffff7c1309b]
/usr/local/bin/osmo-bts-trx(+0xd14a) [0x55555556114a]
Program received signal SIGABRT, Aborted.
__GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
(gdb)
</pre> Cellular Network Infrastructure - Bug #5030 (Resolved): jenkins ttcn3-bsc-test and ttcn3-bts-test...https://osmocom.org/issues/50302021-02-17T13:31:41Zdexter
<p>The following two TTCN3 testsuites fail in jenkins.</p>
<p><a class="external" href="https://jenkins.osmocom.org/jenkins/view/TTCN3/job/ttcn3-bsc-test/1285/">https://jenkins.osmocom.org/jenkins/view/TTCN3/job/ttcn3-bsc-test/1285/</a><br /><a class="external" href="https://jenkins.osmocom.org/jenkins/view/TTCN3/job/ttcn3-bts-test/1190/">https://jenkins.osmocom.org/jenkins/view/TTCN3/job/ttcn3-bts-test/1190/</a></p>
<p>building osmo-bts fails with the following errror message:<br />../../include/osmo-bts/gsm_data.h:326:29: error: field 'l1_info' has incomplete type</p>
<p>This is due to the following patch:<br /><a class="external" href="https://gerrit.osmocom.org/c/osmo-bts/+/22938">https://gerrit.osmocom.org/c/osmo-bts/+/22938</a></p>
<p>which depends on</p>
<p><a class="external" href="https://gerrit.osmocom.org/c/libosmocore/+/22932">https://gerrit.osmocom.org/c/libosmocore/+/22932</a></p>
<p>both are merged and were built without problems in gerrit. It might be that the libosmocore change is not propagated into the libosmocore package yet.</p> OsmoMSC - Bug #3934 (Resolved): TC_sgsap_expl_imsi_det_noneps crashes osmo-mschttps://osmocom.org/issues/39342019-04-16T07:59:23Zdexter
<p>This is presumably similar to <a class="issue tracker-1 status-3 priority-2 priority-default closed" title="Bug: TC_smpp_mt_sms crashes osmo-msc (Resolved)" href="https://osmocom.org/issues/3930">#3930</a>.</p>
<pre>
Tue Apr 16 09:56:08 2019 DMNCC <0004> mncc_sock.c:320 MNCC socket at /home/owner/mncc_sock
Tue Apr 16 09:56:08 2019 DLGLOBAL <0012> telnet_interface.c:104 Available via telnet 127.0.0.1 4254
Tue Apr 16 09:56:08 2019 DSMPP <000c> smpp_smsc.c:1017 SMPP at 0.0.0.0 2775
Tue Apr 16 09:56:08 2019 DLCTRL <0019> control_if.c:911 CTRL at 127.0.0.1 4255
Tue Apr 16 09:56:08 2019 DLGSUP <001c> gsup_client.c:73 GSUP connecting to 127.0.0.1:4222
Tue Apr 16 09:56:08 2019 DLMGCP <0022> mgcp_client.c:716 MGCP client: using endpoint domain '@mgw'
Tue Apr 16 09:56:08 2019 DLMGCP <0022> mgcp_client.c:791 MGCP GW connection: r=127.0.0.1:2427<->l=127.0.0.1:2727
Tue Apr 16 09:56:08 2019 DLSCCP <001f> sccp_user.c:397 OsmoMSC-A: Using SS7 instance 0, pc:0.23.1
Tue Apr 16 09:56:08 2019 DLSCCP <001f> sccp_user.c:415 OsmoMSC-A: Using AS instance as-clnt-OsmoMSC-A
Tue Apr 16 09:56:08 2019 DLSCCP <001f> sccp_user.c:420 OsmoMSC-A: Creating default route
Tue Apr 16 09:56:08 2019 DLSCCP <001f> sccp_user.c:476 OsmoMSC-A: Using ASP instance asp-clnt-OsmoMSC-A
Tue Apr 16 09:56:08 2019 DLSS7 <001e> osmo_ss7.c:471 0: Creating SCCP instance
Tue Apr 16 09:56:08 2019 DSGS <0011> sgs_server.c:185 SGs socket bound to r=NULL<->l=0.0.0.0:29118
Tue Apr 16 09:56:08 2019 DBSSAP <0010> a_iface.c:674 Initalizing SCCP connection to stp...
Tue Apr 16 09:56:09 2019 DLGSUP <001c> gsup_client.c:73 GSUP connecting to 127.0.0.1:4222
Tue Apr 16 09:56:10 2019 DLGSUP <001c> gsup_client.c:73 GSUP connecting to 127.0.0.1:4222
Tue Apr 16 09:56:10 2019 DLM3UA <0021> m3ua.c:634 asp-asp-clnt-OsmoMSC-A: Received NOTIFY Type State Change:AS Inactive ()
Tue Apr 16 09:56:10 2019 DLSS7 <001e> xua_default_lm_fsm.c:353 xua_default_lm(asp-clnt-OsmoMSC-A)[0x5607406a6fe0]{ACTIVE}: Ignoring primitive M-ASP_ACTIVE.confirm
Tue Apr 16 09:56:10 2019 DLM3UA <0021> m3ua.c:634 asp-asp-clnt-OsmoMSC-A: Received NOTIFY Type State Change:AS Active ()
Tue Apr 16 09:56:11 2019 DLGSUP <001c> gsup_client.c:73 GSUP connecting to 127.0.0.1:4222
Tue Apr 16 09:56:12 2019 DLGSUP <001c> gsup_client.c:73 GSUP connecting to 127.0.0.1:4222
Tue Apr 16 09:56:13 2019 DLGSUP <001c> gsup_client.c:73 GSUP connecting to 127.0.0.1:4222
Tue Apr 16 09:56:13 2019 DLCTRL <0019> control_if.c:554 accept()ed new CTRL connection from (r=127.0.0.1:38313<->l=127.0.0.1:4255)
Tue Apr 16 09:56:13 2019 DMNCC <0004> mncc_sock.c:275 MNCC Socket has connection with external call control application
Tue Apr 16 09:56:14 2019 DLGSUP <001c> gsup_client.c:73 GSUP connecting to 127.0.0.1:4222
Tue Apr 16 09:56:14 2019 DLINP <0014> input/ipa.c:128 127.0.0.1:4222 connection done
Tue Apr 16 09:56:14 2019 DLINP <0014> input/ipaccess.c:705 received ID get from 0/0/0
Tue Apr 16 09:56:14 2019 DBSSAP <0010> a_iface.c:140 The calling BSC (RI=SSN_PC,PC=0.24.1,SSN=BSSAP) is unknown to this MSC ...
Tue Apr 16 09:56:14 2019 DBSSAP <0010> a_iface.c:490 Adding new BSC connection for BSC RI=SSN_PC,PC=0.24.1,SSN=BSSAP...
Tue Apr 16 09:56:14 2019 DBSSAP <0010> a_iface_bssap.c:112 Rx BSSMAP RESET from BSC RI=SSN_PC,PC=0.24.1,SSN=BSSAP, sending RESET ACK
Tue Apr 16 09:56:14 2019 DSMPP <000c> smpp_smsc.c:753 [] smpp_pdu_rx(00 00 00 32 00 00 00 09 00 00 00 00 00 00 00 01 6d 73 63 5f 74 65 73 74 65 72 00 6f 73 6d 6f 63 6f 6d 31 00 4d 53 43 5f 54 65 73 74 73 00 34 00 00 00 )
Tue Apr 16 09:56:14 2019 DSMPP <000c> smpp_smsc.c:546 [msc_tester] Rx BIND Trx (Version 34)
Tue Apr 16 09:56:14 2019 DSGS <0011> sgs_server.c:123 r=127.0.0.1:9999<->l=127.0.0.1:29118: Accepted new SGs connection
Tue Apr 16 09:56:14 2019 DLCTRL <0019> control_if.c:554 accept()ed new CTRL connection from (r=127.0.0.1:45709<->l=127.0.0.1:4255)
Tue Apr 16 09:56:14 2019 DSGS <0011> fsm.c:423 SGs-VLR-RESET(901-70-0001-01)[0x5607406ac120]{unknown 0}: Allocated
Tue Apr 16 09:56:14 2019 DSGS <0011> fsm.c:423 SGs-UE(num:0)[0x5607406aca20]{SGs-NULL}: Allocated
Tue Apr 16 09:56:14 2019 DSGS <0011> vlr_sgs_fsm.c:359 SGs-UE(num:0)[0x5607406aca20]{SGs-NULL}: state_chg to SGs-NULL
Tue Apr 16 09:56:14 2019 DREF <000a> vlr_sgs.c:83 VLR subscr unknown + SGs: now used by 1 (SGs)
Tue Apr 16 09:56:14 2019 DVLR <000e> vlr.c:446 set IMSI on subscriber; IMSI=262420000011815 id=262420000011815
Tue Apr 16 09:56:14 2019 DVLR <000e> vlr.c:397 New subscr, IMSI: 262420000011815
Tue Apr 16 09:56:14 2019 DVLR <000e> vlr.c:446 set IMSI on subscriber; IMSI=262420000011815 id=262420000011815
Tue Apr 16 09:56:14 2019 DSGS <0011> vlr_sgs.c:96 SGs-UE(num:0)[0x5607406aca20]{SGs-NULL}: Received Event RX_LU_FROM_MME
Tue Apr 16 09:56:14 2019 DSGS <0011> vlr_sgs_fsm.c:55 SGs-UE(num:0)[0x5607406aca20]{SGs-NULL}: state_chg to SGs-LA-UPDATE-PRESENT
Tue Apr 16 09:56:14 2019 DVLR <000e> gsm_04_08.c:1772 SUBSCR(IMSI-262420000011815:TMSInew-0x25E218F7) VLR: update for IMSI=262420000011815 (MSISDN=)
Tue Apr 16 09:56:14 2019 DVLR <000e> vlr.c:197 GSUP tx: 04010862420200001118f5280102
Tue Apr 16 09:56:14 2019 DVLR <000e> vlr.c:1092 GSUP rx 20: 10010862420200001118f5080706942103108151
Tue Apr 16 09:56:14 2019 DREF <000a> vlr.c:1113 VLR subscr IMSI-262420000011815:TMSInew-0x25E218F7 + vlr_gsupc_read_cb: now used by 2 (SGs,vlr_gsupc_read_cb)
Tue Apr 16 09:56:14 2019 DVLR <000e> vlr.c:800 IMSI:262420000011815 has MSISDN:491230011815
Tue Apr 16 09:56:14 2019 DVLR <000e> gsm_04_08.c:1772 SUBSCR(IMSI-262420000011815:MSISDN-491230011815:TMSInew-0x25E218F7) VLR: update for IMSI=262420000011815 (MSISDN=491230011815)
Tue Apr 16 09:56:14 2019 DVLR <000e> vlr.c:197 GSUP tx: 12010862420200001118f5
Tue Apr 16 09:56:14 2019 DREF <000a> vlr.c:1161 VLR subscr IMSI-262420000011815:MSISDN-491230011815:TMSInew-0x25E218F7 - vlr_gsupc_read_cb: now used by 1 (SGs)
Tue Apr 16 09:56:14 2019 DVLR <000e> vlr.c:1092 GSUP rx 11: 06010862420200001118f5
Tue Apr 16 09:56:14 2019 DREF <000a> vlr.c:1113 VLR subscr IMSI-262420000011815:MSISDN-491230011815:TMSInew-0x25E218F7 + vlr_gsupc_read_cb: now used by 2 (SGs,vlr_gsupc_read_cb)
Tue Apr 16 09:56:14 2019 DSGS <0011> vlr_sgs.c:116 SGs-UE(num:0)[0x5607406aca20]{SGs-LA-UPDATE-PRESENT}: Received Event TX_LU_ACCEPT
Tue Apr 16 09:56:14 2019 DSGS <0011> vlr_sgs_fsm.c:141 SGs-UE(imsi:262420000011815)[0x5607406aca20]{SGs-LA-UPDATE-PRESENT}: state_chg to SGs-ASSOCIATED
Tue Apr 16 09:56:14 2019 DREF <000a> vlr.c:1161 VLR subscr IMSI-262420000011815:MSISDN-491230011815:TMSInew-0x25E218F7 - vlr_gsupc_read_cb: now used by 1 (SGs)
Tue Apr 16 09:56:14 2019 DREF <000a> vlr_sgs.c:223 VLR subscr IMSI-262420000011815:MSISDN-491230011815:TMSInew-0x25E218F7 + vlr_sgs_tmsi_reall_compl: now used by 2 (SGs,vlr_sgs_tmsi_reall_compl)
Tue Apr 16 09:56:14 2019 DSGS <0011> vlr_sgs.c:227 SGs-UE(imsi:262420000011815)[0x5607406aca20]{SGs-ASSOCIATED}: Received Event RX_TMSI_REALLOC
Tue Apr 16 09:56:14 2019 DSGS <0011> vlr_sgs_fsm.c:206 SGs-UE(imsi:262420000011815)[0x5607406aca20]{SGs-ASSOCIATED}: state_chg to SGs-ASSOCIATED
Tue Apr 16 09:56:14 2019 DREF <000a> vlr_sgs.c:228 VLR subscr IMSI-262420000011815:MSISDN-491230011815:TMSI-0x25E218F7 - vlr_sgs_tmsi_reall_compl: now used by 1 (SGs)
Tue Apr 16 09:56:17 2019 DREF <000a> vlr_sgs.c:140 VLR subscr IMSI-262420000011815:MSISDN-491230011815:TMSI-0x25E218F7 + vlr_sgs_imsi_detach: now used by 2 (SGs,vlr_sgs_imsi_detach)
Tue Apr 16 09:56:17 2019 DSGS <0011> vlr_sgs.c:166 SGs-UE(imsi:262420000011815)[0x5607406aca20]{SGs-ASSOCIATED}: Received Event RX_DETACH_IND_FROM_MME
Tue Apr 16 09:56:17 2019 DSGS <0011> vlr_sgs_fsm.c:72 SGs-UE(imsi:262420000011815)[0x5607406aca20]{SGs-ASSOCIATED}: state_chg to SGs-NULL
Tue Apr 16 09:56:17 2019 DREF <000a> vlr.c:1254 VLR subscr IMSI-262420000011815:MSISDN-491230011815:TMSI-0x25E218F7 - attached: now used by 1 (SGs,vlr_sgs_imsi_detach,-1*attached)
Assert failed _osmo_use_count_get_put(&(vsub)->use_count, "attached", -1, "vlr.c", 1254) == 0 vlr.c:1254
backtrace() returned 11 addresses
/usr/local/lib/libosmocore.so.12(osmo_panic+0xbb) [0x7f0dbf83a8db]
osmo-msc(+0x3dfc1) [0x56073f346fc1]
osmo-msc(+0x446ee) [0x56073f34d6ee]
osmo-msc(+0x3637b) [0x56073f33f37b]
osmo-msc(+0x36ccb) [0x56073f33fccb]
/usr/local/lib/libosmonetif.so.6(+0xa7e3) [0x7f0dbf4037e3]
/usr/local/lib/libosmocore.so.12(osmo_select_main+0x1f1) [0x7f0dbf82fbc1]
osmo-msc(+0xd44f) [0x56073f31644f]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf1) [0x7f0dbe3c52b1]
osmo-msc(+0xd5ea) [0x56073f3165ea]
signal 6 received
backtrace() returned 15 addresses
osmo-msc(+0xd81d) [0x56073f31681d]
/lib/x86_64-linux-gnu/libc.so.6(+0x33030) [0x7f0dbe3d8030]
/lib/x86_64-linux-gnu/libc.so.6(gsignal+0xcf) [0x7f0dbe3d7fcf]
/lib/x86_64-linux-gnu/libc.so.6(abort+0x16a) [0x7f0dbe3d93fa]
/usr/local/lib/libosmocore.so.12(osmo_set_panic_handler+0) [0x7f0dbf83a8e0]
osmo-msc(+0x3dfc1) [0x56073f346fc1]
osmo-msc(+0x446ee) [0x56073f34d6ee]
osmo-msc(+0x3637b) [0x56073f33f37b]
osmo-msc(+0x36ccb) [0x56073f33fccb]
/usr/local/lib/libosmonetif.so.6(+0xa7e3) [0x7f0dbf4037e3]
/usr/local/lib/libosmocore.so.12(osmo_select_main+0x1f1) [0x7f0dbf82fbc1]
osmo-msc(+0xd44f) [0x56073f31644f]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf1) [0x7f0dbe3c52b1]
osmo-msc(+0xd5ea) [0x56073f3165ea]
talloc report on 'vty' (total 174968 bytes in 9344 blocks)
struct vty contains 863 bytes in 4 blocks (ref 0) 0x5607406ab440
struct vty contains 1004 bytes in 16 blocks (ref 0) 0x5607406a7450
Configure SCCP timer values, see ITU-T Q.714
Waiting for connection confirm message, 1 to 2 minutes (default: 60)
Send keep-alive: on an idle connection, delay before sending an Idle Timer message, 5 to 10 minutes (default: 420)
Receive keep-alive: on an idle connection, delay until considering a connection as stale, 11 to 21 minutes (default: 900)
Waiting for release complete message, 10 to 20 seconds (default: 10)
Waiting for release complete message; or to repeat sending released message after the initial expiry, 10 to 20 seconds (default: 10)
Waiting for release complete message; or to release connection resources, freeze the LRN and alert a maintenance function after the initial expiry, extending to 1 minute (default: 60)
Waiting to resume normal procedure for temporary connection sections during the restart procedure, 23 to 25 minutes (default: 1380)
Waiting to release temporary connection section or alert maintenance function after reset request message is sent, 10 to 20 seconds (default: 10)
Waiting to receive all the segments of the remaining segments, single segmented message after receiving the first segment, 10 to 20 seconds (default: 10)
Timer value, in seconds
contains 1194 bytes in 1 blocks (ref 0) 0x5607405c5830
sccp-timer (conn_est|ias|iar|rel|repeat_rel|int|guard|reset|reassembly) <1-999999> contains 83 bytes in 1 blocks (ref 0) 0x5607405c56c0
save_cwd contains 37 bytes in 1 blocks (ref 0) 0x560740587960
vty_command contains 105253 bytes in 5615 blocks (ref 0) 0x560740574c20
vty_vector contains 66534 bytes in 3705 blocks (ref 0) 0x560740574bb0
full talloc report on 'osmo_msc' (total 18143 bytes in 98 blocks)
telnet_connection contains 177 bytes in 3 blocks (ref 0) 0x56074069e0f0
struct telnet_connection contains 88 bytes in 1 blocks (ref 0) 0x5607406ab380
struct telnet_connection contains 88 bytes in 1 blocks (ref 0) 0x5607406aa590
struct osmo_ss7_instance contains 2478 bytes in 29 blocks (ref 0) 0x56074069e650
struct osmo_sccp_instance contains 266 bytes in 3 blocks (ref 0) 0x5607406a6570
struct osmo_sccp_user contains 90 bytes in 2 blocks (ref 0) 0x5607406a7110
OsmoMSC-A contains 10 bytes in 1 blocks (ref 0) 0x56074069ebd0
struct osmo_ss7_as contains 624 bytes in 7 blocks (ref 0) 0x56074069ee70
as-clnt-OsmoMSC-A contains 18 bytes in 1 blocks (ref 0) 0x56074069f360
struct osmo_fsm_inst contains 364 bytes in 4 blocks (ref 0) 0x56074069f040
struct xua_as_fsm_priv contains 104 bytes in 1 blocks (ref 0) 0x56074069f290
XUA_AS(as-clnt-OsmoMSC-A)[0x56074069f040] contains 42 bytes in 1 blocks (ref 0) 0x56074069f1f0
as-clnt-OsmoMSC-A contains 18 bytes in 1 blocks (ref 0) 0x56074069f170
as-clnt-OsmoMSC-A contains 18 bytes in 1 blocks (ref 0) 0x56074069efc0
struct osmo_ss7_asp contains 1147 bytes in 14 blocks (ref 0) 0x56074069eaa0
(r=127.0.0.1:2905<->l=127.0.0.1:41915) contains 39 bytes in 1 blocks (ref 0) 0x56074069ed70
struct osmo_fsm_inst contains 367 bytes in 4 blocks (ref 0) 0x5607406a5de0
struct xua_asp_fsm_priv contains 104 bytes in 1 blocks (ref 0) 0x5607406a64a0
XUA_ASP(asp-clnt-OsmoMSC-A)[0x5607406a5de0] contains 44 bytes in 1 blocks (ref 0) 0x5607406a5f10
asp-clnt-OsmoMSC-A contains 19 bytes in 1 blocks (ref 0) 0x56074069e1d0
struct osmo_stream_cli contains 242 bytes in 2 blocks (ref 0) 0x5607406a4a00
127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x5607406a4b50
struct osmo_fsm_inst contains 278 bytes in 4 blocks (ref 0) 0x5607406a6fe0
struct lm_fsm_priv contains 8 bytes in 1 blocks (ref 0) 0x5607406a7b00
xua_default_lm(asp-clnt-OsmoMSC-A)[0x5607406a6fe0] contains 51 bytes in 1 blocks (ref 0) 0x5607406a57b0
asp-clnt-OsmoMSC-A contains 19 bytes in 1 blocks (ref 0) 0x5607406a5860
127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x56074069e2c0
asp-clnt-OsmoMSC-A contains 19 bytes in 1 blocks (ref 0) 0x56074069e540
struct osmo_ss7_route_table contains 145 bytes in 4 blocks (ref 0) 0x56074069e7e0
struct osmo_ss7_route contains 82 bytes in 2 blocks (ref 0) 0x5607406a59f0
as-clnt-OsmoMSC-A contains 18 bytes in 1 blocks (ref 0) 0x5607406a7a80
system contains 7 bytes in 1 blocks (ref 0) 0x56074069e4d0
struct osmo_stream_srv_link contains 352 bytes in 4 blocks (ref 0) 0x56074069c870
struct sgs_connection contains 256 bytes in 2 blocks (ref 0) 0x5607406a6c90
struct osmo_stream_srv contains 104 bytes in 1 blocks (ref 0) 0x5607406a9d20
0.0.0.0 contains 8 bytes in 1 blocks (ref 0) 0x56074069c930
struct sgs_state contains 741 bytes in 5 blocks (ref 0) 0x56074069c690
struct sgs_mme_ctx contains 365 bytes in 4 blocks (ref 0) 0x5607406ac050
struct osmo_fsm_inst contains 261 bytes in 3 blocks (ref 0) 0x5607406ac120
SGs-VLR-RESET(901-70-0001-01)[0x5607406ac120] contains 46 bytes in 1 blocks (ref 0) 0x5607406ac250
901-70-0001-01 contains 15 bytes in 1 blocks (ref 0) 0x5607406ab760
struct smsc contains 600 bytes in 3 blocks (ref 0) 0x560740689f20
struct osmo_esme contains 336 bytes in 1 blocks (ref 0) 0x5607406a6ad0
struct osmo_smpp_acl contains 112 bytes in 1 blocks (ref 0) 0x56074069f460
struct gsm_network contains 7961 bytes in 31 blocks (ref 0) 0x5607405c7580
struct bsc_context contains 441 bytes in 5 blocks (ref 0) 0x5607406aa3f0
struct osmo_fsm_inst contains 241 bytes in 3 blocks (ref 0) 0x5607406a7290
A-RESET(bsc-193)[0x5607406a7290] contains 33 bytes in 1 blocks (ref 0) 0x5607406a73c0
bsc-193 contains 8 bytes in 1 blocks (ref 0) 0x5607406a6d90
struct reset_ctx contains 16 bytes in 1 blocks (ref 0) 0x5607406aa510
struct mgcp_client contains 688 bytes in 1 blocks (ref 0) 0x5607406a4ff0
struct gsm_sms_queue contains 216 bytes in 1 blocks (ref 0) 0x5607406a4830
struct ctrl_handle contains 478 bytes in 5 blocks (ref 0) 0x56074069cfa0
struct ctrl_connection contains 199 bytes in 2 blocks (ref 0) 0x5607406ab1e0
(r=127.0.0.1:45709<->l=127.0.0.1:4255) contains 39 bytes in 1 blocks (ref 0) 0x5607406ab2f0
struct ctrl_connection contains 199 bytes in 2 blocks (ref 0) 0x5607406a9b80
(r=127.0.0.1:38313<->l=127.0.0.1:4255) contains 39 bytes in 1 blocks (ref 0) 0x5607406a9c90
struct mncc_sock_state contains 104 bytes in 1 blocks (ref 0) 0x56074069e880
127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x5607405c8440
/home/owner/mncc_sock contains 22 bytes in 1 blocks (ref 0) 0x56074069e450
112 contains 4 bytes in 1 blocks (ref 0) 0x56074069e160
127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x56074069e3d0
OsmoMSC contains 8 bytes in 1 blocks (ref 0) 0x5607405c8360
OsmoMSC contains 8 bytes in 1 blocks (ref 0) 0x5607405c83d0
struct vlr_instance contains 2804 bytes in 10 blocks (ref 0) 0x5607405c84c0
struct vlr_subscr contains 1994 bytes in 4 blocks (ref 0) 0x5607406ac2f0
struct osmo_fsm_inst contains 266 bytes in 3 blocks (ref 0) 0x5607406aca20
SGs-UE(imsi:262420000011815)[0x5607406aca20] contains 45 bytes in 1 blocks (ref 0) 0x5607406ad210
imsi:262420000011815 contains 21 bytes in 1 blocks (ref 0) 0x5607406ad190
struct osmo_gsup_client contains 490 bytes in 4 blocks (ref 0) 0x5607406a4340
struct osmo_fd contains 48 bytes in 1 blocks (ref 0) 0x5607406a45d0
struct ipa_client_conn contains 186 bytes in 2 blocks (ref 0) 0x5607406a44b0
127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x5607406a4670
struct ipaccess_unit contains 64 bytes in 1 blocks (ref 0) 0x5607406a4290
rate_ctr.c:234 contains 2352 bytes in 1 blocks (ref 0) 0x5607405c7920
logging contains 4393 bytes in 9 blocks (ref 0) 0x560740574360
Configure logging
Set the log level for a specified category
A-bis Radio Link Layer (RLL)
Layer3 Call Control (CC)
Layer3 Mobility Management (MM)
Layer3 Radio Resource (RR)
MNCC API for Call Control application
Paging Subsystem
Mobile Switching Center
Media Gateway Control Protocol
Hand-Over
Database Layer
Reference Counting
Control interface
SMPP interface for external SMS apps
Radio Access Network Application Part Protocol
Visitor Location Register
Iu-CS Protocol
BSSAP Protocol (A Interface)
SGs Interface (SGsAP)
Library-internal global log family
LAPD in libosmogsm
A-bis Intput Subsystem
A-bis B-Subchannel TRAU Frame Multiplex
A-bis Input Driver for Signalling
A-bis Input Driver for B-Channels (voice)
Layer3 Short Message Service (SMS)
Control Interface
GPRS GTP library
Statistics messages and logging
Generic Subscriber Update Protocol
Osmocom Authentication Protocol
libosmo-sigtran Signalling System 7
libosmo-sigtran SCCP Implementation
libosmo-sigtran SCCP User Adaptation
libosmo-sigtran MTP3 User Adaptation
libosmo-mgcp Media Gateway Control Protocol
libosmo-netif Jitter Buffer
Remote SIM protocol
Deprecated alias for 'no logging level force-all'
contains 1173 bytes in 1 blocks (ref 0) 0x5607405dcf70
logging level (rll|cc|mm|rr|mncc|pag|msc|mgcp|ho|db|ref|ctrl|smpp|ranap|vlr|iucs|bssap|sgs|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) everything contains 212 bytes in 1 blocks (ref 0) 0x5607405dcd80
Configure logging
Set the log level for a specified category
A-bis Radio Link Layer (RLL)
Layer3 Call Control (CC)
Layer3 Mobility Management (MM)
Layer3 Radio Resource (RR)
MNCC API for Call Control application
Paging Subsystem
Mobile Switching Center
Media Gateway Control Protocol
Hand-Over
Database Layer
Reference Counting
Control interface
SMPP interface for external SMS apps
Radio Access Network Application Part Protocol
Visitor Location Register
Iu-CS Protocol
BSSAP Protocol (A Interface)
SGs Interface (SGsAP)
Library-internal global log family
LAPD in libosmogsm
A-bis Intput Subsystem
A-bis B-Subchannel TRAU Frame Multiplex
A-bis Input Driver for Signalling
A-bis Input Driver for B-Channels (voice)
Layer3 Short Message Service (SMS)
Control Interface
GPRS GTP library
Statistics messages and logging
Generic Subscriber Update Protocol
Osmocom Authentication Protocol
libosmo-sigtran Signalling System 7
libosmo-sigtran SCCP Implementation
libosmo-sigtran SCCP User Adaptation
libosmo-sigtran MTP3 User Adaptation
libosmo-mgcp Media Gateway Control Protocol
libosmo-netif Jitter Buffer
Remote SIM protocol
Log debug messages and higher levels
Log informational messages and higher levels
Log noticeable messages and higher levels
Log error messages and higher levels
Log only fatal messages
contains 1308 bytes in 1 blocks (ref 0) 0x5607405dc7f0
logging level (rll|cc|mm|rr|mncc|pag|msc|mgcp|ho|db|ref|ctrl|smpp|ranap|vlr|iucs|bssap|sgs|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) contains 233 bytes in 1 blocks (ref 0) 0x5607405dc600
struct log_target contains 242 bytes in 2 blocks (ref 0) 0x560740574970
struct log_category contains 74 bytes in 1 blocks (ref 0) 0x560740574a80
struct log_info contains 1224 bytes in 2 blocks (ref 0) 0x5607405743d0
struct log_info_cat contains 1184 bytes in 1 blocks (ref 0) 0x560740574460
transaction contains 0 bytes in 1 blocks (ref 0) 0x5607405742f0
gsm_call contains 0 bytes in 1 blocks (ref 0) 0x560740574280
sms contains 0 bytes in 1 blocks (ref 0) 0x560740574210
osmo_signal contains 280 bytes in 8 blocks (ref 0) 0x5607405741a0
struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x56074069ece0
struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x56074069ec50
struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x5607406aa840
struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x5607406a9690
struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x56074069e5c0
struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x56074069e340
struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x560740652e60
msgb contains 1160 bytes in 2 blocks (ref 0) 0x560740574130
SGsAP contains 1160 bytes in 1 blocks (ref 0) 0x5607406abb60
./start_msc.sh: line 6: 25552 Aborted osmo-msc -c ./osmo-msc.cfg
$
</pre>
<p>This time it was possible to reproduce the issue with gdb:</p>
<pre>
Tue Apr 16 09:58:30 2019 DSGS <0011> vlr_sgs_fsm.c:206 SGs-UE(imsi:262420000011815)[0x55555591b320]{SGs-ASSOCIATED}: state_chg to SGs-ASSOCIATED
Tue Apr 16 09:58:30 2019 DREF <000a> vlr_sgs.c:228 VLR subscr IMSI-262420000011815:MSISDN-491230011815:TMSI-0x3A4902EF - vlr_sgs_tmsi_reall_compl: now used by 1 (SGs)
Tue Apr 16 09:58:33 2019 DREF <000a> vlr_sgs.c:140 VLR subscr IMSI-262420000011815:MSISDN-491230011815:TMSI-0x3A4902EF + vlr_sgs_imsi_detach: now used by 2 (SGs,vlr_sgs_imsi_detach)
Tue Apr 16 09:58:33 2019 DSGS <0011> vlr_sgs.c:166 SGs-UE(imsi:262420000011815)[0x55555591b320]{SGs-ASSOCIATED}: Received Event RX_DETACH_IND_FROM_MME
Tue Apr 16 09:58:33 2019 DSGS <0011> vlr_sgs_fsm.c:72 SGs-UE(imsi:262420000011815)[0x55555591b320]{SGs-ASSOCIATED}: state_chg to SGs-NULL
Tue Apr 16 09:58:33 2019 DREF <000a> vlr.c:1254 VLR subscr IMSI-262420000011815:MSISDN-491230011815:TMSI-0x3A4902EF - attached: now used by 1 (SGs,vlr_sgs_imsi_detach,-1*attached)
Assert failed _osmo_use_count_get_put(&(vsub)->use_count, "attached", -1, "vlr.c", 1254) == 0 vlr.c:1254
backtrace() returned 11 addresses
/usr/local/lib/libosmocore.so.12(osmo_panic+0xbb) [0x7ffff731e8db]
/usr/local/bin/osmo-msc(+0x3dfc1) [0x555555591fc1]
/usr/local/bin/osmo-msc(+0x446ee) [0x5555555986ee]
/usr/local/bin/osmo-msc(+0x3637b) [0x55555558a37b]
/usr/local/bin/osmo-msc(+0x36ccb) [0x55555558accb]
/usr/local/lib/libosmonetif.so.6(+0xa7e3) [0x7ffff6ee77e3]
/usr/local/lib/libosmocore.so.12(osmo_select_main+0x1f1) [0x7ffff7313bc1]
/usr/local/bin/osmo-msc(+0xd44f) [0x55555556144f]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf1) [0x7ffff5ea92b1]
/usr/local/bin/osmo-msc(+0xd5ea) [0x5555555615ea]
Program received signal SIGABRT, Aborted.
__GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:51
51 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
(gdb) bt
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:51
#1 0x00007ffff5ebd3fa in __GI_abort () at abort.c:89
#2 0x00007ffff731e8e0 in osmo_panic_default (args=0x7fffffffcb68, fmt=0x55555559a28c "Assert failed %s %s:%d\n") at panic.c:49
#3 osmo_panic (fmt=fmt@entry=0x55555559a28c "Assert failed %s %s:%d\n") at panic.c:84
#4 0x0000555555591fc1 in vlr_subscr_expire (vsub=vsub@entry=0x55555591abf0) at vlr.c:1254
#5 0x00005555555986ee in vlr_sgs_imsi_detach (vlr=<optimized out>, imsi=imsi@entry=0x7fffffffcca0 "262420000011815", type=SGSAP_ID_NONEPS_T_COMBINED_UE_EPS_NONEPS) at vlr_sgs.c:171
#6 0x000055555558a37b in sgs_rx_imsi_det_ind (tp=0x7fffffffce40, tp=0x7fffffffce40, imsi=0x7fffffffcca0 "262420000011815", msg=0x55555591a530, sgc=0x555555918650) at sgs_iface.c:634
#7 sgs_iface_rx (sgc=sgc@entry=0x555555918650, msg=msg@entry=0x55555591a530) at sgs_iface.c:985
#8 0x000055555558accb in sgs_conn_readable_cb (conn=0x555555913810) at sgs_server.c:87
#9 0x00007ffff6ee77e3 in osmo_stream_srv_read (conn=0x555555913810) at stream.c:894
#10 osmo_stream_srv_cb (ofd=<optimized out>, what=1) at stream.c:949
#11 0x00007ffff7313bc1 in osmo_fd_disp_fds (_eset=0x7fffffffe050, _wset=0x7fffffffdfd0, _rset=0x7fffffffdf50) at select.c:223
#12 osmo_select_main (polling=<optimized out>) at select.c:263
#13 0x000055555556144f in main (argc=3, argv=0x7fffffffe218) at msc_main.c:724
(gdb)
</pre> OsmoBTS - Support #3863 (Stalled): setup testing of osmo-bts-oc2g on real hardware with ttcn3 and...https://osmocom.org/issues/38632019-03-26T16:21:06Zdexter
<p>In order to be able to debug problems with automatic interop testing a local instance of an osmocom-bb phone and BTS is required. TRXCONT/FAKETRX are exchanged with a real BTS/PHONE.</p> OsmoMGW - Bug #3849 (New): race condition problem in rtp flow tests of the ttcn3 testsuitehttps://osmocom.org/issues/38492019-03-18T16:53:06Zdexter
<p>The TTCN3 tests that test actual RTP flow behavior through the MGW are prone to fail due to a race condition. The problem occurs when the RTP receiver in the test suite is switched off while at least one packet is still in the loop. When the packet eventually arrives the follwing error is generated:</p>
<pre>
RTP packets received while RX was disabled
MGCP_Test.ttcn:1424 MGCP_Test control part
MGCP_Test.ttcn:1364 TC_ts101318_rfc5993_rtp_conversion testcase
</pre>
<p>The problem is presumably more likely to occur when the test slave is under high load. Since all RTP tests are using the same API and work by the same principle all of those tests are prone to fail from time to time:</p>
<p>TC_one_crcx_loopback_rtp<br />TC_one_crcx_receive_only_rtp<br />TC_rtpem_selftest<br />TC_ts101318_rfc5993_rtp_conversion<br />TC_two_crcx_and_one_mdcx_rtp_ho<br />TC_two_crcx_and_rtp<br />TC_two_crcx_and_rtp_bidir<br />TC_two_crcx_and_unsolicited_rtp<br />TC_two_crcx_diff_pt_and_rtp<br />TC_two_crcx_diff_pt_and_rtp_bidir<br />TC_two_crcx_mdcx_and_rtp</p> OsmoBSC - Bug #3833 (Resolved): Fix storage location of AMR S15-S0 bitshttps://osmocom.org/issues/38332019-03-11T17:44:34Zdexter
<p>The current storage location of s15_s0 (lchan->activate.info.s15_s0) is incorrect by the current memory model. This should be fixed by finding a proper storage location that fits into the current memory model.</p>
<p>See also:<br /><a class="external" href="https://gerrit.osmocom.org/#/c/osmo-bsc/+/13200/">https://gerrit.osmocom.org/#/c/osmo-bsc/+/13200/</a><br /><a class="external" href="https://gerrit.osmocom.org/#/c/osmo-bsc/+/13039/">https://gerrit.osmocom.org/#/c/osmo-bsc/+/13039/</a></p> OsmoMSC - Bug #3704 (Resolved): When Paging request for SMS is unanswered, osmo-msc sends infinit...https://osmocom.org/issues/37042018-11-22T18:01:02Zdexter
<p>The problem occurs when the MSC is attempting to page for an MT SM but the BSC is not responding in any way. The paging requests repeat over and over, even when the SCCP connection is shut down one can still see by the logs that the BSC still trying to page.</p>
<p>The reason for this problem seems not to be located in the code that controls the paging, but rather in the code that runs the SM Queue. The problem is that when the paging fails the SM Queue is trying to deliver the SM again and again. However, there is indeed a mechanism implemented that shall prevent undeliverable SM cycling through the queue again and again. When there are errors during the delivery, the function db_sms_inc_deliver_attempts() is called and once the counters reach a certain maximum the SM is removed from the queue. For some reason this is only done when some error during the delivery happens, but not when the delivery could not be started because the paging did not succeed.</p> OsmoMGW - Bug #3673 (Resolved): chopped LCOhttps://osmocom.org/issues/36732018-10-26T12:20:47Zdexter
<p>(see trace) The codec name that that is transmitted in the LCO of the first CRCX is expected to re-appear in the SDP of the following 200 OK message. When inspecting the SDP of the following/second message, one can see that the last character of the codec name is missing. Since such a behavior can not observed when the codec was transmitted via SDP, the problem presumably is in the LCO parser.</p> OpenBSC - Bug #3657 (Resolved): fix support for non voice configurationhttps://osmocom.org/issues/36572018-10-16T13:32:46Zdexter
<p>At the moment osmo-bsc does not permit non voice configurations. A valid voice codec configuration must be in place, otherwise the COMPLETE LAYER 3 INFORMATION message generation will fail because the SPEECH CODEC LIST (BSS supported) IE can not be generated. The speech codec list is a mandatory IE, but only if the network supports an IP based user plane interface. In networks that intentionally do not support voice, it could be garmented that those networks do not have such an interface and therefore the inclusion of the speech codec list is not needed. Also a speech codec list with 0 elements is indeed permitted by the spec. We could also include a speech codec list with 0 elements for the non-voice configurations.</p> OsmoBSC - Bug #3527 (Resolved): When EFR is used Speech Version and Speech Codec seem to mismatch...https://osmocom.org/issues/35272018-09-06T07:28:28Zdexter
<p>The specification demands that Speech Codec (choosen) and Speech Version (choosen) are consistent. With osmo-bsc this seems not to be the case when EFR is used. It still shows "GSM speech full rate version 1" in the Speech Version field. This looks odd and needs to be checked back. There should be something like "GSM speech full rate version 2" or so but not 1.</p>
<p>Attached one finds a sample packet.</p> OsmoBTS - Bug #3497 (Resolved): udp/gsmtap multicast is broken osmo-bts-virtual and virtphyhttps://osmocom.org/issues/34972018-08-23T18:08:37Zdexter
<p>Unfortunately libosmocore change I4a8ffb8d598aca88801a4a0322944d7cdd8d4047 introduced than SO_REUSEADDR should be disabled when IPPROTO_UDP is used. Under normal conditions this makes sense and is also necessary to detect when two processes try to use the same port but for multicast situations like we have them with osmo-bts-virtual, virtphy and gsmtap in general this becomes a problem.</p> OsmoMGW - Bug #3442 (New): fix int mgcp_codec_decide() in mgcp_codec.chttps://osmocom.org/issues/34422018-08-02T14:08:40Zdexter
<p>The function mgcp_codec_decide() selects the codec that is later returned with the MGCP response in MGCP. The response is generated from rtp->codec, which is set by mgcp_codec_decide().</p>
<p>Unfortunately, the current implementation of mgcp_codec_decide() makes no sense at all. It only causes no trouble at the moment because endp->tcfg->no_audio_transcoding is set to 0, which means that transcoding is turned on at the moment even though we do not support trans coding.</p>
<p>mgcp_codec_decide() should be revised in the following way: <br />We remove rtp->codec, because Technically an MGW does not have one selected codec, it knows about several codecs and may make choices based on its transcoding capabilities and policies. In practice this would mean that mgcp_codec_decide() removes all the unsupported codecs from rtp->codecs[]. The functions that generate the SDP will then find only the selected codecs and return them. At the moment we can only return one codec from inside the SDP because we use rtp->codec as data source.</p>
<p>Since we do not support transcoding at the moment there will not be much in mgcp_codec_decide(), endp->tcfg->no_audio_transcoding is set to 0 we can display a warning that tells the user that transcoding is not supported yet.</p> OsmoBSC - Bug #3413 (Resolved): TC_lcls_connect_clear does not pass anymore.https://osmocom.org/issues/34132018-07-23T19:39:02Zdexter
<p>After we increased the test coverage in <a class="issue tracker-1 status-3 priority-3 priority-high3 closed" title="Bug: BSC_Tests.ttcn is too tolerant in MGCP validation (Resolved)" href="https://osmocom.org/issues/3292">#3292</a> we observed problems with the LCLS tests. (TC_ho_int is a real regression) Those were then fixed, but now TC_lcls_connect_clear indicates problems again. It is not clear yet what causes the failure, but it the location of the problems seems to be in the second interleave after the clear command is sent. The testcase seems to have problems with receiving/matching the tr_RSL_RF_CHAN_REL() template. The test case passes when CONN_A.receive(tr_RSL_RF_CHAN_REL(?)) is removed from the interleave.</p>
<p>When the interactions are traced using wirshark, the RSL CHANNEL RELEASE message can be seen, so it must be somewhere in the template/interleave processing.</p> OsmoBSC - Bug #3361 (Resolved): VTY option codec-support is not usedhttps://osmocom.org/issues/33612018-06-28T16:12:27Zdexter
<p>osmo-bts has per-bts codec support flags, which are stored in struct bts_codec_conf *codec</p>
<p>The vty option codec-support sets those flags:<br />codec->hr<br />codec->efr<br />codec->amr</p>
<p>But the flags seem not to be used anywhere. In osmo_bsc_bssap.c osmo-bts decides for a codec depending on what the MS and the MSC offer. We should include those flags here as well.</p> OsmoMGW - Feature #3334 (Resolved): use proper sdp in libosmo-mgcp-clienthttps://osmocom.org/issues/33342018-06-11T19:30:18Zdexter
<p>libosmo-mgcp-client currently uses hardcoded SDP with fixed values. It also uses a payload type 255, which is illegal.</p>
<p>- Add new struct members to allow setting of ptime, payload type and rtpmap if needed.<br />- Generate proper SDP and use it when communicating to the MGW<br />- Decode the SDP responses from osmo-mgw.<br />- Update both, the normal mgcp_client and mgcp_client_fsm</p> OsmoBSC - Bug #2936 (Resolved): Fix TTCN3 Test BSC_Tests.TC_assignment_signhttps://osmocom.org/issues/29362018-02-12T20:23:55Zdexter
<p>The Testcase BSC_Tests.TC_assignment_sign seems to behave incorrectly. It sends an Assignment Request where it requests a signaling only channel SDCCH. Osmo-bsc then decides that is already active is compatible and sends a Channel Mode Modify via RSL, which is never answered. The T10 timeout expires and the assignment fails.</p>
<p>From what I can see, the decision osmo-bsc makes is correct. Also the TTCN3 function f_channel_compatible(ass_cmd.pdu.bssmap.assignmentRequest.channelType, g_chan_nr) that is called from f_establish_fully() comes to the conclusion that the channel is compatible. I am currently lost in the altstep in at the end. I would expect it to continue with as_modify(st) but there I can see none of the steps processed.</p>
<p>From my understanding the behavior of osmo-bsc is correct and the TTCN3 testcase has some malfunction. Attached one finds a trace of the current behavior. See also branch: pmaier/fsm</p> OsmoMGW - Bug #2863 (Resolved): osmo-mgw segfaults on DLCX (use-after-free in mgcp_network.c)https://osmocom.org/issues/28632018-01-23T19:23:47Zdexter
<p>In mgcp_network.c in mgcp_dispatch_rtp_bridge_cb() we use conn->priv to store the pointer to the opposite connection so we do not need to iterate through the connection list once more. When someone frees the opposite connection using a DLCX, then the pointer points to already freed memory. We need some mechanism to invalidate that information on DLCX, so that the callback function can know and prevent the use-after-free.</p> OsmoBSC - Bug #2823 (Resolved): Use bsc_subscr_conn_fsm in BSChttps://osmocom.org/issues/28232018-01-08T22:28:12Zdexter
<p>On laforge/fsm a draft FSM implementation can be found to make the handling of the subscriber connection safer and stateful.</p> OsmoMSC - Feature #2822 (Closed): work out MSC test scenarioshttps://osmocom.org/issues/28222018-01-08T20:43:22Zdexter
<p>We plan to test osmo-msc with TTCN3 as well. In Preparation of this we have to collect Ideas for test-cases.</p> libosmocore - Bug #2613 (Closed): vty crashes on tab-completionhttps://osmocom.org/issues/26132017-11-02T16:11:14Zdexter
<p>The problem is located in libosmocore, so it exists in all our products. It<br />looks like it is somehow liked to the tab-completion. The problem can be<br />triggered for example by logging into a vty and try to tab-complete some<br />items of the help menu, it seems to bail at the second level of tab completion.</p>
<pre>
Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.
Welcome to the osmo-stp control interface
Copyright (C) 2015-2017 by Harald Welte <laforge@gnumonks.org>
Contributions by Holger Freyther, Neels Hofmeyr
License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
This is free software: you are free ot change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Free Software lives by contribution. If you use this, please contribute!
osmo-stp>
show Show running system information
list Print command list
exit Exit current mode and down to previous mode
help Description of the interactive help system
enable Turn on privileged mode command
terminal Set terminal line parameters
who Display who is on vty
logging Configure log message to this terminal
osmo-stp> h
osmo-stp> help
</pre>
<p>Attached the logtext including backtrace.</p> OsmoMGW - Feature #2516 (Resolved): automatic testing of osmo-mgw / jenkins integrationhttps://osmocom.org/issues/25162017-09-18T21:45:01Zdexter
<p>Currently we test osmo-mgw with unit tests. It might make sense to run some more realistic tests. The idea is to start osmo-mgw in a testrig that then makes test connections and sends test data. The testrig could be a python program or even a TTCN3 test.</p>
Some ideas:
<ul>
<li>Send command (e.g. CRCX) and inspect resulting internal states via VTY also check response for plausibility</li>
<li>Send odd command sequences, check if the expected error codes are generated.</li>
<li>Send malformed messages or incomplete messages, check if the expected error codes are generated</li>
<li>Create a full connection, send RTP packets through, check if the RTP packets take the right path</li>
<li>Create a loopback connection, send RTP packets, check if the packets are reflected correctly</li>
</ul> OpenBSC - Feature #2515 (Closed): integrate osmo-mgw in osmo-bschttps://osmocom.org/issues/25152017-09-18T15:48:17Zdexter
<p>osmo-mgw has reached a development state, where it makes sens to try out how it performs in a real life situation. Osmo-bsc seems like a good test target for that and requires mgcp features anyway to support handover. The complexity can be limited by leaving osmo-msc on the legacy mgcp, while performing changes only to osmo-bsc. When done, osmo-bsc should not behave any different on the A-Interface.</p> libosmo-sccp + libosmo-sigtran - Bug #2441 (Closed): chopped-off pointcodeshttps://osmocom.org/issues/24412017-08-15T11:16:54Zdexter
<p>It seems that that the pointcode data is chopped off when receiving unittdata.</p>
<p>When looking at the attached trace.pcapng file, one can see that the RESET<br />command is correctly transmitted, but the response, the RESET ACK is always<br />sent to the wrong destination address. (187 instead of 2235). When converting<br />those to numbers one can see that the addresses seem to be chopped off,<br />presumably at the 8th bit:</p>
<pre>
2235 = 100010111011
187 = 10111011
</pre>
<p>When investigating further it turns out that the pointcode is already chopped<br />off when the RESET is received:</p>
<pre>
Tue Aug 15 11:35:20 2017 <000a> a_iface.c:531 N-UNITDATA.ind(00 04 30 04 01 20 )
Tue Aug 15 11:35:20 2017 <000a> a_iface_bssap.c:184 Rx BSC UDT: 00 04 30 04 01 20
Tue Aug 15 11:35:20 2017 <000a> a_iface_bssap.c:157 Rx BSC UDT BSSMAP RESET
Tue Aug 15 11:35:20 2017 <000a> a_iface_bssap.c:110 Rx RESET from BSC RI=SSN_PC,PC=0.23.3,SSN=unknown 0xfe,GTI=NO_GT, sending RESET ACK
Tue Aug 15 11:35:20 2017 <000a> fsm.c:176 FSM RESET(FSM RESET INST)[0x55555589b7a0]{DISC}: Timeout of T0
Tue Aug 15 11:35:20 2017 <000a> a_reset.c:102 (RI=SSN_PC,PC=0.23.3,SSN=unknown 0xfe,GTI=NO_GT) reset-ack timeout (T0) in state ST_DISC (disconnected), resending...
Tue Aug 15 11:35:20 2017 <000a> a_iface.c:443 Sending RESET to BSC RI=SSN_PC,PC=0.23.3,SSN=unknown 0xfe,GTI=NO_GT
</pre>
<p>Presumably the upcoming primitive already contains the chopped pointcode.</p> libosmo-sccp + libosmo-sigtran - Bug #2345 (Closed): VTY: Check returncode of osmo_ss7_pointcode_...https://osmocom.org/issues/23452017-06-30T13:50:30Zdexter
<p>The function osmo_ss7_pointcode_parse() may yield -EINVAL as result. Make sure that if this is the case, the result will not be used and a CMD_WARNING is returned.</p> OsmoMSC - Bug #2322 (Resolved): Make osmo-msc work with external mncchttps://osmocom.org/issues/23222017-06-12T17:06:27Zdexter
<p>In its current state, osmo-msc does not work with the external mncc. This needs to be fixed.</p> pySim - Bug #1989 (Closed): SMSC not set for sysmo-usim-sjs1https://osmocom.org/issues/19892017-03-27T07:55:36Zdexter
<p>When setting the SMSC using pysim, it stays at its original value. Possibly setting of the SMSC value is not implemented for sysmo-usim-sjs1.</p> OsmoPCU - Bug #1932 (Closed): vty command write corrupts config file for osmo-bts-octphyhttps://osmocom.org/issues/19322017-01-30T14:19:12Zdexter
<p>After issuing the write command from the VTY console, osmo-bts-octphy will refuse to start due to unparsable config file:</p>
<pre>
((*))
|
/ \ OsmoBTS
<0006> l1_if.c:765 model_init()
There is no such command.
Error occurred during reading below line:
netdev eth4
Failed to parse the config file: 'osmo-bts.cfg'
</pre> OpenBSC - Bug #1779 (Closed): Problems with automatic subscriber creation.https://osmocom.org/issues/17792016-07-21T22:50:12Zdexter
<p>Maybe this is a problem with my configuration, but after long time I tried the automatic subscriber creation mode again. It constantly rejects the location update with the cause that no subscriber could be found. I traced the problem down to gsm_04_08.c:static bool subscr_regexp_check(). There the regexec() seems to fail.</p>
<p>The VTY show s the following:</p>
<p>OpenBSC> show network <br />BSC is on Country Code 1, Network Code 1 and has 1 BTS<br /> Long network name: 'Vaderfone'<br /> Short network name: 'Vaderfone'<br /> Authentication policy: accept-all, authorized regexp: *<br /> Auto create subscriber: yes<br /> Auto assign extension: yes<br /> Location updating reject cause: 13<br /> Encryption: A5/0<br /> NECI (TCH/H): 1<br /> Use TCH for Paging any: 0<br /> RRLP Mode: none<br /> MM Info: On<br /> Handover: Off<br /> Current Channel Load:<br /> Last RF Command: <br /> Last RF Lock Command:</p>
<p>If i get things right, "authorized regexp: *" should be ok with any IMSI. When I hardcode the returnvalue of subscr_regexp_check() to true it accepts any IMSI again and happyly creates the subscriber.</p>