Project

General

Profile

Actions

Bug #1424

closed

simtrace pinout of tps73633 is wrong

Added by laforge about 8 years ago. Updated about 8 years ago.

Status:
Closed
Priority:
High
Assignee:
Category:
SIMtrace hardware
Target version:
-
Start date:
Due date:
% Done:

0%

Spec Reference:

Description

The pinout of the TPS73633 in our kicad component library is quite wrong. It's not a simple 1:1 mirroring, but the pins are completely mixed up.

Actions #1

Updated by tsaitgaist almost 13 years ago

Only the TAB was not connected to GND, but was internally connected to the other ground pin. Now ground is connected on both pins.
The footprint I drew is in accordance with the datasheet ( http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=296-16914-1-ND ).
I need to test the chip itself to see if the datasheet is wrong.

Actions #2

Updated by tsaitgaist almost 13 years ago

  • Resolution set to fixed

correct in KiCAD v0.9.3, PCB v0.9.6

Actions #3

Updated by laforge about 8 years ago

  • Project changed from OsmocomBB to SIMtrace
  • Category changed from 244 to SIMtrace hardware
Actions

Also available in: Atom PDF

Add picture from clipboard (Maximum size: 48.8 MB)