Project

General

Profile

Bug #2663

osmo-hnbgw missing reasonable default configuration for sigtran

Added by laforge about 1 year ago. Updated 10 months ago.

Status:
Closed
Priority:
Normal
Assignee:
Target version:
-
Start date:
11/20/2017
Due date:
% Done:

100%

Spec Reference:

Description

unlike e.g. osmo-bsc, osmo-hnbgw doesn't have a reasonable "sane" default configuration. The config includes "127.0.0.5" as an IP address which is not mentioned/documented anywhere. Also, it uses the undocumented hard-coded point code.

By default, it should probably use:
  • 127.0.0.1 as STP address
  • 2905 as STP port
  • 0.23.2 as dest point-code for the MSC (the MSC already uses this as default for IuCS)
  • 0.23.4 as dest point-code for the SGSN (TODO: OsmoSGSN needs to use this as default)
  • 0.23.5 as its local point code

Related issues

Related to Cellular Network Infrastructure - Bug #2664: document our default point codes in the wikiClosed2017-11-20

Related to OsmoSGSN - Bug #2665: OsmoSGSN doesn't listen on reasonable default point codeClosed2017-11-20

History

#1 Updated by laforge about 1 year ago

  • Related to Bug #2664: document our default point codes in the wiki added

#2 Updated by laforge about 1 year ago

  • Related to Bug #2665: OsmoSGSN doesn't listen on reasonable default point code added

#3 Updated by laforge about 1 year ago

  • Assignee changed from laforge to neels

#4 Updated by neels about 1 year ago

  • Status changed from New to In Progress
  • % Done changed from 0 to 90
  • 127.0.0.1 as STP address
  • 2905 as STP port

does so.

So far uses 127.0.0.5 as local ip-address to connect to STP, which doesn't make any sense.
https://gerrit.osmocom.org/5166

  • 0.23.2 as dest point-code for the MSC (the MSC already uses this as default for IuCS)
  • 0.23.4 as dest point-code for the SGSN (TODO: OsmoSGSN needs to use this as default)
  • 0.23.5 as its local point code

According to [[Cellular Infrastructure:Point Codes]] the MSC PC is 0.23.1. Merged by https://gerrit.osmocom.org/4977 a while ago.

#5 Updated by neels about 1 year ago

  • Status changed from In Progress to Resolved
  • % Done changed from 90 to 100

all merged

#6 Updated by laforge 10 months ago

  • Status changed from Resolved to Closed

Also available in: Atom PDF

Add picture from clipboard (Maximum size: 48.8 MB)