Project

General

Profile

Actions

Feature #4050

closed

final osmo-clock-gen v2 changes

Added by laforge almost 5 years ago. Updated almost 5 years ago.

Status:
Resolved
Priority:
High
Assignee:
Target version:
-
Start date:
06/06/2019
Due date:
% Done:

100%

Spec Reference:

Checklist

  • clearance on short edges for slot-in mounting in extruded aluminium enclosures or "Baugruppentraeger"
  • MTA-100 at "east" edge of PCB for daisy-chained power cabling
  • TC-2050 instead of TC-2030 for "standard" JTAG/SWD like other boards
  • remove "A" and "D" label on east and west side of jumper block
Actions #1

Updated by mschramm almost 5 years ago

  • Status changed from New to In Progress
Actions #2

Updated by mschramm almost 5 years ago

  • Checklist item clearance on short edges for slot-in mounting in extruded aluminium enclosures or "Baugruppentraeger" set to Done
  • Checklist item TC-2050 instead of TC-2030 for "standard" JTAG/SWD like other boards set to Done
  • Checklist item remove "A" and "D" label on east and west side of jumper block set to Done
Actions #3

Updated by mschramm almost 5 years ago

  • % Done changed from 0 to 70
Actions #4

Updated by mschramm almost 5 years ago

I did not yet find proper space and clearance for an MTA100 header, as the area is huge and bulky a possible 180° shrouded UEXT header would occupy.

Also the clearance area on the short edged could be even more generous (2mm is utmost minimum needed, 3mm would be better).

Actions #5

Updated by mschramm almost 5 years ago

  • Checklist item MTA-100 at "east" edge of PCB for daisy-chained power cabling set to Done
  • Status changed from In Progress to Resolved
  • % Done changed from 70 to 100

finished compacting design and placing MTA100 header with 016e05e.

Actions

Also available in: Atom PDF

Add picture from clipboard (Maximum size: 48.8 MB)