Project

General

Profile

Actions
Copy link

Bug #5070

closed

VBUS too close to GND (too little clearance)

Added by laforge about 3 years ago. Updated about 3 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
cibomahto
Category:
electronics
Target version:
-
Start date:
03/09/2021
Due date:
% Done:

100%

Description

Next to the J1 USB host connector, the Vbus trace has very little clearance to the shield of the connector. Let's increase clearance here.

Files

openvizsla-host_usb-detail.png View openvizsla-host_usb-detail.png 29.7 KB mschramm, 03/09/2021 09:32 PM
VBUS too close to GND.png View VBUS too close to GND.png 89.7 KB cibomahto, 03/15/2021 11:43 AM
Actions
Copy link
 #2

Updated by laforge about 3 years ago

  • Assignee changed from mschramm to cibomahto
Actions
Copy link
 #4

Updated by cibomahto about 3 years ago

  • Status changed from New to In Progress
Actions
Copy link
 #5

Updated by mschramm about 3 years ago

looks good, thanks

Actions
Copy link
 #6

Updated by mschramm about 3 years ago

  • Status changed from In Progress to Resolved
  • % Done changed from 0 to 100
Actions
Copy link

Also available in: Atom PDF

Add picture from clipboard (Maximum size: 48.8 MB)