Project

General

Profile

Support #4121

Updated by fixeria over 4 years ago

Hi, 

 I have an issue when trying to start osmocom-trx-lms: "Invalid frequency value." 

 osmo-trx-lms was compiled from sources. 

 Strangely, it works perfectly with my "LimeSDR-mini" but running the same setup with the "LimeSDR-USB" fails. 


 The LimeSDR-USB is properly detected and up to date: 

 <pre> 
 @ 
  LimeUtil --find 
   * [LimeSDR-USB, media=USB 2.0, module=FX3, addr=1d50:6108, serial=0009060B00472237] 
 </pre> 

 @ 


 Here is the full startup log: 

 <pre> @ 
 osmo-trx-lms -C    /etc/osmocom/osmo-trx-lms-big.cfg 
 Fri Jul 19 15:57:28 2019 DLGLOBAL <0004> telnet_interface.c:104 telnet at 127.0.0.1 4237 
 Fri Jul 19 15:57:28 2019 DLCTRL <000b> control_if.c:887 CTRL at 127.0.0.1 4236 
 Fri Jul 19 15:57:28 2019 DMAIN <0000> osmo-trx.cpp:478 [tid=1982672912] Config Settings 
    Log Level............... 3 
    Device args.............  
    TRX Base Port........... 5700 
    TRX Address............. 127.0.0.1 
    GSM BTS Address......... 127.0.0.1 
    Channels................ 1 
    Tx Samples-per-Symbol... 4 
    Rx Samples-per-Symbol... 4 
    EDGE support............ 0 
    Extended RACH support... 0 
    Reference............... 0 
    C0 Filler Table......... 1 
    Multi-Carrier........... 0 
    Tuning offset........... 0 
    RSSI to dBm offset...... 0 
    Swap channels........... 0 
    Tx Antennas............. 'BAND1' 
    Rx Antennas............. 'LNAW' 

 Fri Jul 19 15:57:28 2019 DMAIN <0000> osmo-trx.cpp:434 [tid=1982672912] Setting SCHED_RR priority 18 
 Fri Jul 19 15:57:28 2019 DDEV <0002> LMSDevice.cpp:52 [tid=1982672912] creating LMS device... 
 Fri Jul 19 15:57:28 2019 DDEV <0002> LMSDevice.cpp:139 [tid=1982672912] Opening LMS device.. 
 Fri Jul 19 15:57:28 2019 DDEV <0002> LMSDevice.cpp:145 [tid=1982672912] Devices found: 1 
 Fri Jul 19 15:57:28 2019 DDEV <0002> LMSDevice.cpp:155 [tid=1982672912] Device [0]: LimeSDR-USB, media=USB 2.0, module=FX3, addr=1d50:6108, serial=0009060B00472237 
 Fri Jul 19 15:57:28 2019 DDEV <0002> LMSDevice.cpp:164 [tid=1982672912] Using device[0] 
 Fri Jul 19 15:57:29 2019 DLMS <0003> LMSDevice.cpp:92 [tid=1982672912] Reference clock 30.72 MHz 
 Fri Jul 19 15:57:29 2019 DDEV <0002> LMSDevice.cpp:190 [tid=1982672912] Init LMS device 
 Fri Jul 19 15:57:29 2019 DDEV <0002> LMSDevice.cpp:203 [tid=1982672912] Setting Internal clock reference 
 Fri Jul 19 15:57:29 2019 DLMS <0003> LMSDevice.cpp:92 [tid=1982672912] Invalid frequency value. 
 Fri Jul 19 15:57:29 2019 DDEV <0002> LMSDevice.cpp:252 [tid=1982672912] Error in LMS open, closing: Invalid frequency value. 
 Fri Jul 19 15:57:29 2019 DMAIN <0000> osmo-trx.cpp:512 [tid=1982672912] Failed to create radio device 
 Fri Jul 19 15:57:29 2019 DMAIN <0000> osmo-trx.cpp:483 [tid=1982672912] Shutting down transceiver... 
 Fri Jul 19 15:57:29 2019 DDEV <0002> LMSDevice.cpp:63 [tid=1982672912] Closing LMS device 
 </pre> @ 

 Is there something I am missing? 

 Thanks for your help! 

Back

Add picture from clipboard (Maximum size: 48.8 MB)