GnuArmToolchain » History » Version 14
GNU ARM toolchain¶
This page will describe the procedure for compiling a GNU ARM toolchain.
We will build a toolchain consisting of:
- GCC 4.8.2
- Binutils 2.21.1
- Newlib 1.19
Getting the buildscript¶
First of all, create a directory you want to use for building the toolchain, and download the buildscript [raw-gnu-arm-build.3.sh] there.
You will need to make it executable:
$ chmod +x gnu-arm-build.3.sh
In order to build the toolchain, you will need to install the following packages (assuming you're using a Debian-based distribution):
$ sudo apt-get install build-essential libgmp3-dev libmpfr-dev libx11-6 libx11-dev texinfo flex bison libncurses5 \ libncurses5-dbg libncurses5-dev libncursesw5 libncursesw5-dbg libncursesw5-dev zlibc zlib1g-dev libmpfr4 libmpc-dev
Open a shell in the directory of gnu-arm-build.sh and create the following directories:
$ mkdir build install src
Download the needed sources to src/:
$ cd src/ $ wget http://ftp.gnu.org/gnu/gcc/gcc-4.8.2/gcc-4.8.2.tar.bz2 $ wget http://ftp.gnu.org/gnu/binutils/binutils-2.21.1a.tar.bz2 $ wget ftp://sources.redhat.com/pub/newlib/newlib-1.19.0.tar.gz
Building the toolchain¶
$ cd .. $ ./gnu-arm-build.3.sh I will build an arm-none-eabi cross-compiler: Prefix: <YOURPATH>/install Sources: <YOURPATH>/src Build files: <YOURPATH>/build Press ^C now if you do NOT want to do this.
Hit enter and after some time hopefully end up with:
Build complete! Add <YOURPATH>/bin to your PATH to make arm-none-eabi-gcc and friends accessible directly.
Making it accessible¶
If you're using bash, you can add the following in your ~/.bashrc file:
This script is a slightly updated/modified version of the script found here.
The original version also builds Insight, but since we don't need that, we won't build it. If you want to, just remove the comments in the shellscript.