Project

General

Profile

Actions

Iota » History » Revision 9

« Previous | Revision 9/13 (diff) | Next »
steve-m, 02/19/2016 10:48 PM
add link to bottom scan


This is the Analog Baseband Chip TWL3025

It's very similar to its predecessors, the TWL3014 and TWL3016 devices.

A data sheet for the TWL3014 is available from http://www.52rd.com/bbs/Detail_RD.BBS_8719_68_1_1.html
but forum registration is required for download.

It consists of various functions, including * ADC and DAC for the GSM baseband signals * ADC and DAC for the Voice/Audio path * DAC for APC (Automatic Power Control) * DAC for AFC (Automatic Frequency Control) * Battery Charging Controller * LDO's (Linear Power Regulators)

The functions of the ABB are controlled by a register set. The register set
is available through both USP and BSP.

External Interfaces === USP (uController Serial Port) ===

This is the SPI-like control interface between DBB and the TWL3025 (ABB).

[[Image(Iota:twl3025_usp.png)]]

=== TSP (Timee Serial Port) ===

It is connected to the TSP controller inside the [wiki:Hardware/Calypso] DBB.

The CLK6.5 Signal makes things a bit more complicated than we would like. The sequence of events is something like: * CLK_13M is applied continuously to TWL3025 * nTEN is in default state of high (inactive) * internal CLK6.5 is in default state low * nTEN is asserted low by TPU, some 0..65ns before CLK_13M rising edge * next CLK13M falling edge starts first CLK6.5 rising edge * every falling edge of CLK13M toggles CLK6.5 * TDR is sampled at every rising edge of CLK6.5 (including the first edge above) * 7 bits are transferred during seven rising edges of CLK6.5 * TEN stays asserted for 1 CLK13M period after last bit is transferred * TEN needs to be released before next CLK13M rising edge to prevent another transfer

=== BSP (Baseband Serial Port) ===

This synchronous serial port is connected to the RIF (Radio InterFace) of the Calypso DBB.

=== Debug traces ===

The chip has very tiny debug traces on a small flex-pcb around the 4 sides of the chip.
Which trace goes to which ball can be seen on this scan: http://www.steve-m.de/pictures/iota_bottom.jpg

Files (1)
twl3025_usp.png View twl3025_usp.png 10.2 KB The USP as measured on a C123 phone laforge, 01/26/2010 06:56 PM

Updated by steve-m about 8 years ago · 9 revisions

Add picture from clipboard (Maximum size: 48.8 MB)