Actions
BS11LMT » History » Revision 7
« Previous |
Revision 7/8
(diff)
| Next »
laforge, 02/19/2016 10:48 PM
Name changed from BS11_LMT to BS11/LMT
How to use LMT¶
- connect serial port of PC with J2 on BS11 using the cable that came with the BS11
- start LMT program
LMT rs232 connector pinout¶
If you look at the BS-11 interface (Antenne connectors top), its the upper 8-pin connector:
The four E1 BNC connectors are above here. (Rx) x x x x (right pin: Gnd) (Tx) x x x x (right pin: +5V) | + LMT
see also [[Image(BS11_Configuration:bs11_power_lmt_cabling.jpg)]]
J2:
5(GND) | | 3(TX) | | X 0 X 0 0 0 X 0 | 2(RX)
RS232:
5(GND) | | 3(TX) | | | | 2(RX) | | | X 0 X X 0 0 0 0 0
Known Versions (and issues?)¶
LMT v4.17¶
LMT v4.21¶
Updated by laforge about 8 years ago · 7 revisions