Project

General

Profile

Actions

BS-11 LMT

How to use LMT

  • connect serial port of PC with J2 on BS11 using the cable that came with the BS11
  • start LMT program

LMT rs232 connector pinout

If you look at the BS-11 interface (Antenne connectors top), its the upper 8-pin connector:

  The four E1 BNC connectors are above here.

     (Rx) x x x x (right pin: Gnd)
     (Tx) x x x x (right pin: +5V)
            |
            + LMT

see also

J2:

  5(GND)
  |
  |   3(TX)
  |   |
  X 0 X 0
  0 0 X 0
      |
      2(RX)

RS232:


  5(GND)
  |
  |   3(TX)
  |   |
  |   | 2(RX)
  |   | |
  X 0 X X 0
   0 0 0 0

Known Versions (and issues?)

LMT v4.17

LMT v4.21

Files (3)
img_6412-1.jpg View img_6412-1.jpg 255 KB , 04/21/2009 08:02 PM
img_6414-1.jpg View img_6414-1.jpg 303 KB , 04/21/2009 08:03 PM
bs11_power_lmt_cabling.jpg View bs11_power_lmt_cabling.jpg 376 KB laforge, 02/21/2016 11:10 AM

Updated by laforge about 8 years ago · 8 revisions

Add picture from clipboard (Maximum size: 48.8 MB)