Project

General

Profile

Actions

Ethernet dummyload » History » Revision 2

« Previous | Revision 2/7 (diff) | Next »
dexter, 02/19/2016 10:48 PM


The ethernet dummload

To lower the risk of interfering with a commercial network operator you should operate your BS11 with a dummyload. We discovered that an old ethernet terminator can do the job. It consists of an 50Ohm resistor.

Image(ethernetDummyload_parts.JPG, width=300px)

Files (4)

Updated by dexter about 8 years ago · 2 revisions

Add picture from clipboard (Maximum size: 48.8 MB)