Actions
Ethernet dummyload » History » Revision 3
« Previous |
Revision 3/7
(diff)
| Next »
dexter, 02/19/2016 10:48 PM
The ethernet dummload
To lower the risk of interfering with a commercial network operator you should operate your BS11 with a dummyload. We discovered that an old ethernet terminator can do the job. It is just a 50Ohms resistor - exactly what we need.
Image(ethernetDummyload_parts.JPG, width=300px)
To connect the terminator to the BS11 you need an N-Connector to BNC adaptor. Just put them together and you have a nice dummload for your BTS.
Updated by dexter about 8 years ago · 3 revisions