Project

General

Profile

Actions

OsmoHNBGW » History » Revision 1

Revision 1/20 | Next »
laforge, 02/21/2016 08:16 PM


OsmoHNBGW

We are implementing Iuh support in the Osmocom stack, mostly carried out by employees of sysmocom GmbH1, with highly appreciated (yet undisclosed) external backing.

Iu support in Osmocom will allow using a femto-cell aka hNodeB as BTS, thus enabling UMTS voice (IuCS) and data (IuPS) connectivity using FOSS software from the core network right up to the femto-cell's ethernet jack.

Here is an ASCII art overview of our current aim:

        +------------+           +--------+          +----------+
 UE <-->| hNodeB     |<--Iuh---->| HNB-GW |<--IuCS-->| OsmoCSCN |
 UE <-->| femto cell |     ...-->|        |    ...-->|          |
        |            |           |        |          +----------+
        +------------+<--GTP-U   |        |
                              \  |        |          +------+           +------+
                              |  |        |<--IuPS-->| SGSN |<--GTP-C-->| GGSN |
                              |  +--------+    ...-->|      |   GTP-U-->|      |
                              |                      +------+  /        +------+
                              \_______________________________/

                      Iuh                         IuCS/IuPS

NAS                   +----+----+                 +----+----+
Non-Access Stratum    | CC | MM |                 | CC | MM |
- - - - - - - - - - - +----+----+-------+         +----+----+
                      | RANAP   |       |    H    | RANAP   |
Access Stratum        +---------+ HNBAP |    N    +---------+ - - SCCP USER SAP
                      | RUA     |       |    B    | SUA     |  \
                      +---------+-------+    -    +---------+  |
                      |        SCTP     |    G    | SCTP    |  } SIGTRAN
                      +-----------------+    W    +---------+  |
                      |        IP       |         | IP      |  /
                      +-----------------+         +---------+

UE (User Endpoint) MS (Mobile Subscriber) mobile device
CSCN (Circuit Switched Core Network) == OsmoNITB without BSC
(Source: ​http://git.osmocom.org/osmo-iuh/tree/doc/protocols_around_hnbgw.txt )

3G in a Nutshell

Let me illustrate some details of the Iu interfaces. The following is basically Harald's 3G talk at the 32c32, but with the sheer abundance of complexity it can't hurt to read it in prose.

HNB-GW

The HNB-GW, i.e. the HomeNodeB Gateway, merely reads the CN-DomainIndicator from the RUA layer, which says whether the frame is for voice or data comms (IuCS or IuPS). It then sends the actual RANAP payload either to the OsmoCSCN or the OsmoSGSN. The HNB-GW is implemented in osmo-iuh/src/hnbgw.c, compiling as osmo-hnbgw, and is (mostly?) complete.

An interesting factoid is that for an hNodeB, the GTP-Control handshaking goes via the HNB-GW, while the packet user data actually goes directly to/from the hNodeB and the GGSN.

HNBAP

HNBAP is merely the protocol employed to register an hNodeB with the HomeNodeB Gateway. After HNBAP is done, the hNodeB sends RANAP-over-RUA, which the HNB-GW happily passes on to the proper consumers.

SIGTRAN

Typically, the IuCS and IuPS interfaces would talk this layering of protocols:

  CC/MM
  RANAP
  SCCP  <--- note
  M3UA  <--- note
  SCTP
  IP

We do have SCCP support in Osmocom, but so far only for "connectionless" messages (like your standard UDP datagrams). Iu now adds the need for establishing and tearing down connections (like TCP).

However, since SUA does the same as SCCP-over-M3UA and is simpler to implement, our HNB-GW talks SUA towards IuCS and IuPS:

  CC/MM
  RANAP
  SUA   <--- note
  SCTP
  IP

To support third-party MSC and SGSN components, we would either add SCCP-over-M3UA capability, or simply use an external signalling gateway that supports both M3UA and SUA (should be possible e.g. with osmo_ss73).

Various SIGTRAN implementations:

                IuCS/IuPS
                  usual
                   |     simplest
                   |       |
                   v       v
  +------+------+------+-----+
  | SCCP | SCCP |      |     |
  +------+------+ SCCP |     |
  | MTP3 | MTP3 |      |     |
  +------+------+------+ SUA |
  | MTP2 |      |      |     |
  +------+ M2UA | M3UA |     |
  | M2PA |      |      |     |
  +------+------+------+-----+
  |           SCTP           |
  +--------------------------+
  |            IP            |
  +--------------------------+

ASN1 Convolutions

RANAP, RUA and HNBAP, which make up the Iuh interface, are ASN1 encoded. Fair enough, but their ASN1 encoding uses APER, and heavily employs Information Object Classes (which basically means it wraps ASN1 encoded binary data in ASN1 IEs, with several levels of depth). In consequence, the libre asn1c compiler as-is unfortunately is not capable of generating de-/encoders for UMTS. The proprietary ffasn1c is capable of that, and we could publish the ffasn1c generated code without licensing problems, but we'd highly prefer to empower the FOSS community with the ability to modify and fix the ASN1 de-/encoders independently of proprietary software.

The great news is that Eurecom4 has worked on supporting both APER and the nested ASN1 structures ("Information Object Classes") in asn1c, and we are able to use their solutions in a FOSS way. With some fixes added, we have both their APER support and their pythonic solution for nested ASN1 available in Osmocom's libasn1c and asn1c git repositories (5).

Another problem with the Iuh ASN1 is that various type names are identical across RANAP, RUA and HNBAP, while their encodings differ. This causes type name collisions in the code generated by asn1c, hence we have added prefixing support to our version of asn1c. This simply means that each RANAP-related type name or function begins with "ranap_", and RUA names begin with "rua_", thus avoiding any and all name collisions between those protocols. See osmo-iuh/include/osmocom/ranap/ and ../rua/.

It could be more beautiful, but the bottom line is that we now have fully free/libre support for Iuh ASN1 encodings. Cheers!

Conclusion

Osmocom is on a clear trajectory towards full 3G support, empowering remote communities and small to medium businesses worldwide. Work is ongoing, but the really hard problems have already been solved. Stay tuned!

External References

1 ​http://www.sysmocom.de

2 ​https://media.ccc.de/v/32c3-7412-running_your_own_3g_3_5g_network

3 ​http://git.osmocom.org/erlang/osmo_ss7

4 ​http://www.eurecom.fr

5 See ​http://git.osmocom.org/libasn1c/ and ​http://git.osmocom.org/asn1c/log/?h=aper-prefix

Files (0)

Updated by laforge about 8 years ago · 1 revisions

Add picture from clipboard (Maximum size: 48.8 MB)