Actions
Ettus USRP Family » History » Revision 4
« Previous |
Revision 4/9
(diff)
| Next »
laforge, 06/13/2017 06:06 PM
Ettus USRP Family hardware¶
You can run OsmoTRX using the Ettus USRP family of devices.
All Ettus Research devices are supported.
Ettus Research | Notes |
USRP1 | Requires legacy libusrp driver and clocking modification |
USRP2 | 10 MHz external reference required |
B100 | |
B110 | |
B200 | GPSDO or 10 MHz external reference recommended |
B210 | Dual channel, 10 MHz external reference recommended |
N200 | |
N210 | |
E100 | |
E110 |
FIXME: More USRP specific information here
Ettus USRP B2x0¶
Ettus B2x0 output signal levelsband | arfcn | tx-attenuation | signal level (dBm) |
---|---|---|---|
850 | 128 | 0 | 13.2 |
850 | 189 | 0 | 13.2 |
850 | 251 | 0 | 13.2 |
900 | 0 | 0 | 13.1 |
900 | 86 | 0 | 13.1 |
900 | 1023 | 0 | 13.1 |
1800 | 512 | 0 | 6.9 |
1800 | 698 | 0 | 6.9 |
1800 | 870 | 50 | -42.0 |
1800 | 870 | 25 | -16.7 |
1800 | 870 | 10 | -2.1 |
1800 | 870 | 0 | 7.1 |
1800 | 885 | 0 | 6.9 |
1900 | 512 | 0 | 7.2 |
1900 | 661 | 0 | 7.3 |
1900 | 810 | 0 | 7.4 |
these values were measured by sysmocom on a agilent E4406 with an ettus B210
Updated by laforge almost 7 years ago · 4 revisions