Project

General

Profile

EC20 » History » Version 12

laforge, 11/07/2016 09:01 AM
led/ quectel daemon

1 1 zecke
h1. Wiki
2
3 3 zecke
h2. EC20
4
5
Seems to be a MDM9615 + MSM9615. Linux seems to be in charge of things.
6
7
h3. How does it work?
8
9 1 zecke
If on Host-PC I have ttyUSB3.. and I type AT. How does it end up at the modem? On the Linux side there is @atfwd_daemon@ that registers with a local ril daemon but how is USB connected. Who is bouncing things back to it or is Linux forwarding everything..
10 8 laforge
11
* the USB gadget (client) is entirely managed by the Linux on the Cortex-A5.
12
* the individual gadgets are implemented by drivers like f_diag.c or f_serial.c
13
* @f_serial.c@ seems to be able to connect each virtual serial port to a number of different transports:
14
** xport_tty (/dev/ttyGS* device to userspace using @u_serial.c@)
15
** xport_sdio (forwarding via SDIO using @u_sdio.c@)
16
** xport_smd (fowarding via shared memory to different CPU core using @u_smd.c@)
17
** xport_hsic (forwarding to different processor via GSIC using @u_{data,ctrl}_hsic.c@)
18
** xport_hsuart (forwarding via high-speed uart for DUN/RMNET via @u_data_hsuart.c@)
19
20 11 laforge
h3. LED
21 8 laforge
22 12 laforge
GPIO90 seems to be the WWAN LED, quectel_daemon controls it via @echo 0|1 > /sys/class/gpio/gpio90/value@
23 3 zecke
24
h3. Power management
25
26
Sleep/Power off seem to be "intercepted" by @atfwd_daemon@ that can execute "echo mem > /sys/power/state". Let's explore other options for wakeup. Is there a RTC?
27
28
29
h3. Firmware updates with FOTA
30
31
APN for OTA is configured separately on UC20, assumingly the same applies for EC20. A update.zip will be stored on the "cache" partition and it looks like the recovery system will be booted. I guess that then the reocvery system will unpack the update.zip and flash the partitions.
32
33
h3. Debugging with ADB
34
35 1 zecke
Switching on adb (or fastboot or debug to NMEA console)
36
37
<pre>
38
AT+QLINUXCMD="/usr/bin/usb_uartdiag"
39
AT+QFASTBOOT
40
AT+QLINUXCMD="echo foo > /dev/ttyGS0"
41 10 laforge
AT+QLINUXCMD="ps axuw > /dev/ttyGS0"
42
AT+QLINUXCMD="cat /usr/bin/usb_uartdiag > /dev/ttyGS0"
43
44 3 zecke
...
45
46
adb shell
47
# /
48 1 zecke
</pre>
49
50 3 zecke
@/usr/bin/usb_uartdig@ sends "endpoints" to a sysfs file
51 1 zecke
52 3 zecke
53 2 zecke
Changing qcserial.c to have adb and ttyUSBs.. Holger wants to upstream it after 32C3.
54 1 zecke
55
<pre>
56
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
57
index 51da652..2d8d09e 100644
58
--- a/drivers/usb/serial/qcserial.c
59
+++ b/drivers/usb/serial/qcserial.c
60
@@ -176,8 +176,9 @@ static const struct usb_device_id id_table[] = {
61
 };
62
 MODULE_DEVICE_TABLE(usb, id_table);
63
 
64
-static int handle_quectel_ec20(struct device *dev, int ifnum)
65
+static int handle_quectel_ec20(struct usb_device *usbdev, int ifnum)
66
 {
67
+       struct device *dev = &usbdev->dev;
68
        int altsetting = 0;
69
 
70
        /*
71
@@ -201,10 +202,12 @@ static int handle_quectel_ec20(struct device *dev, int ifnum)
72
                dev_dbg(dev, "Quectel EC20 Modem port found\n");
73
                break;
74
        case 4:
75
-       case 5:
76
                /* Don't claim the QMI/net or debug interface */
77
                altsetting = -1;
78
                break;
79
+       case 5:
80
+               usb_set_interface(usbdev, ifnum, 0);
81
+               altsetting = -1;
82
        }
83
 
84
        return altsetting;
85
@@ -285,7 +288,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
86
        case QCSERIAL_G2K:
87
                /* handle non-standard layouts */
88
                if ((nintf == 5 || nintf == 6) && id->idProduct == QUECTEL_EC20_PID) {
89
-                       altsetting = handle_quectel_ec20(dev, ifnum);
90
+                       altsetting = handle_quectel_ec20(serial->dev, ifnum);
91
                        goto done;
92
                }
93
 
94
</pre>
95
96
97
<pre>
98
Not working userspace code
99
100
#include <libusb.h>
101
102
#include <stdio.h>
103
#include <stdlib.h>
104
105
int main(int argc, char **argv)
106
{
107
	struct libusb_device_handle *devh;
108
	int rc;
109
110
	rc = libusb_init(NULL);
111
	printf("%d\n", rc);
112
113
	devh = libusb_open_device_with_vid_pid(NULL, 0x05c6, 0x9215);
114
	if (!devh) {
115
		abort();
116
	}
117
	rc = libusb_claim_interface(devh, 5);
118
	printf("%d\n", rc);
119
	//rc = libusb_detach_kernel_driver(devh, 5);
120
	//printf("%d\n", rc);
121
	rc = libusb_set_interface_alt_setting(devh, 5, 0);
122
	printf("%d\n", rc);     ====> currently prints -5 but is like the one above..
123
	return EXIT_FAILURE;
124
}
125 4 zecke
</pre>
126 3 zecke
127 9 laforge
h3. fastboot / flashing
128
129
The appsboot.mbn we know of (sha1sum 8d47d7e8ca8a15ff089994d87e36b531f36f907a) has no signature and no certificate chain.  This information is established by looking at the image header, whose formta is "documented" in https://android.googlesource.com/kernel/lk/+/caf/master/target/mdm9615/tools/mkheader.c
130
131
132 5 zecke
h3. full lsof output
133 1 zecke
134 6 zecke
[[LsOfOutput]]
135 5 zecke
136 3 zecke
h3. ps
137 1 zecke
138 4 zecke
<pre>
139 3 zecke
/ # ps
140
PID   USER     TIME   COMMAND
141
   1 root       0:01 init [5]
142
   2 root       0:00 [kthreadd]
143
   3 root       0:00 [ksoftirqd/0]
144
   4 root       0:00 [kworker/0:0]
145
   6 root       0:00 [khelper]
146
   7 root       0:00 [netns]
147
   8 root       0:00 [sync_supers]
148
   9 root       0:00 [bdi-default]
149
  10 root       0:00 [kblockd]
150
  11 root       0:00 [khubd]
151
  12 root       0:00 [kworker/0:1]
152
  13 root       0:00 [modem_notifier]
153
  14 root       0:00 [smd_channel_clo]
154
  15 root       0:00 [smsm_cb_wq]
155
  16 root       0:00 [kworker/u:1]
156
  17 root       0:00 [qmi]
157
  18 root       0:00 [nmea]
158
  19 root       0:00 [RPCRPY_CNTL]
159
  20 root       0:00 [IPCRTR]
160
  21 root       0:00 [msm_ipc_router]
161
  22 root       0:00 [ipc_rtr_smd_rpc]
162
  23 root       0:00 [kworker/u:2]
163
  24 root       0:00 [apr_driver]
164
  25 root       0:00 [kswapd0]
165
  26 root       0:00 [ipc_rtr_q6_ipcr]
166
  27 root       0:00 [fsnotify_mark]
167
  28 root       0:00 [crypto]
168
  40 root       0:00 [quec_dtr]
169
  41 root       0:00 [mtdblock0]
170
  42 root       0:00 [mtdblock1]
171
  43 root       0:00 [mtdblock2]
172
  44 root       0:00 [mtdblock3]
173
  45 root       0:00 [mtdblock4]
174
  46 root       0:00 [mtdblock5]
175
  47 root       0:00 [mtdblock6]
176
  48 root       0:00 [mtdblock7]
177
  49 root       0:00 [mtdblock8]
178
  50 root       0:00 [mtdblock9]
179
  51 root       0:00 [mtdblock10]
180
  52 root       0:00 [mtdblock11]
181
  53 root       0:00 [mtdblock12]
182
  54 root       0:00 [mtdblock13]
183
  55 root       0:00 [mtdblock14]
184
  56 root       0:00 [mtdblock15]
185
  57 root       0:00 [spi_qsd.0]
186
  58 root       0:00 [mhsic_wq]
187
  59 root       0:00 [k_rmnet_mux_wor]
188
  60 root       0:00 [f_mtp]
189
  61 root       0:00 [file-storage]
190
  63 root       0:00 [uether]
191
  64 root       0:00 [diag_wq]
192
  65 root       0:00 [diag_cntl_wq]
193
  66 root       0:00 [iewq]
194
  67 root       0:00 [irq/368-msm-sdc]
195
  68 root       0:00 [usb_bam_wq]
196
  69 root       0:00 [bam_dmux_rx]
197
  70 root       0:00 [bam_dmux_tx]
198
  71 root       0:00 [deferwq]
199
  72 root       0:00 [yaffs-bg-1]
200
  92 root       0:00 [k_gserial]
201
  93 root       0:00 [k_gsmd]
202
  94 root       0:00 [k_gbam]
203
  95 root       0:00 [gsmd_ctrl]
204
 129 root       0:00 [yaffs-bg-1]
205
 140 root       0:00 [yaffs-bg-1]
206
 183 root       0:00 /sbin/adbd
207
 205 root       0:00 /usr/bin/time_daemon
208
 208 root       0:00 /usr/bin/wapfotadaemon
209
 211 root       0:00 /usr/bin/wapfotadaemon
210
 212 root       0:00 sh -c qmi_simple_ril_test modem_port=rmnet0 input=/usr/bi
211
 217 root       0:00 qmi_simple_ril_test modem_port=rmnet0 input=/usr/bin/comm
212
 224 nobody     0:00 /usr/bin/dnsmasq -7 /etc/dnsmasq.d
213
 227 root       0:00 qti
214
 231 root       0:00 /sbin/syslogd -n -C64 -m 20
215
 240 root       0:00 /usr/bin/diagrebootapp
216
 246 root       0:00 /usr/bin/atfwd_daemon
217
 256 root       0:00 /usr/bin/qmuxd
218
 272 root       0:00 /bin/sh /usr/sbin/restart_mbimd
219
 275 root       0:00 /usr/bin/netmgrd -u /etc/udhcpc.d/udhcpc.script
220
 280 root       0:00 /usr/bin/qmi_shutdown_modem
221
 284 root       0:03 /usr/bin/quectel_daemon
222
 304 root       0:00 /usr/bin/mbimd
223
 346 root       0:00 /sbin/reboot-daemon
224
 347 root       0:00 /sbin/getty -L ttyHSL0 115200 console
225
 364 root       0:00 /bin/sh /usr/bin/nmea_demon.sh ttyGS0
226
 367 root       0:00 quec_bridge /dev/nmea /dev/ttyGS0 s
227
 439 root       0:01 alsaucm_test
228
 453 root       0:00 [kworker/u:0]
229
 455 root       0:00 [kworker/u:3]
230
 457 root       0:00 [kworker/0:2]
231
 463 root       0:00 [flush-31:15]
232
 473 root       0:00 /bin/sh -
233
 477 root       0:00 [flush-31:14]
234
 478 root       0:00 ps
235 1 zecke
/ # 
236 4 zecke
</pre>
237 3 zecke
238
h3. dmesg
239 1 zecke
240 4 zecke
<pre>
241 3 zecke
/ # dmesg
242
[    0.000000]   Normal zone: 9266 pages, LIFO batch:1
243
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
244
[    0.000000] pcpu-alloc: [0] 0 
245
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 9266
246
[    0.000000] Kernel command line: noinitrd root=/dev/mtdblock14 rw rootfstype=yaffs2 console=ttyHSL0,115200,n8 androidboot.hardware=qcom androidboot.serialno=MDM9615 androidboot.baseband=msm
247
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
248
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
249
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
250
[    0.000000] Memory: 15MB 22MB = 37MB total
251
[    0.000000] Memory: 29472k/29472k available, 9440k reserved, 0K highmem
252
[    0.000000] Virtual kernel memory layout:
253
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
254
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
255
[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
256
[    0.000000]     vmalloc : 0xc6800000 - 0xfa000000   ( 824 MB)
257
[    0.000000]     lowmem  : 0xc0000000 - 0xc6700000   ( 103 MB)
258
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
259
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
260
[    0.000000]       .init : 0xc0008000 - 0xc0032000   ( 168 kB)
261
[    0.000000]       .text : 0xc0032000 - 0xc05ad1d8   (5613 kB)
262
[    0.000000]       .data : 0xc05ae000 - 0xc061ab38   ( 435 kB)
263
[    0.000000]        .bss : 0xc061ab78 - 0xc07cd050   (1738 kB)
264
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
265
[    0.000000] Preemptible hierarchical RCU implementation.
266
[    0.000000] NR_IRQS:681
267
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
268
[    0.000000] Console: colour dummy device 80x30
269
[    0.150190] Calibrating delay using timer specific routine.. 9.62 BogoMIPS (lpj=48102)
270
[    0.150221] pid_max: default: 32768 minimum: 301
271
[    0.150679] Mount-cache hash table entries: 512
272
[    0.151320] Initializing cgroup subsys debug
273
[    0.151350] Initializing cgroup subsys cpuacct
274
[    0.151381] Initializing cgroup subsys freezer
275
[    0.151442] CPU: Testing write buffer coherency: ok
276
[    0.157271] print_constraints: dummy: 
277
[    0.157668] NET: Registered protocol family 16
278
[    0.157820] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
279
[    0.158980] msm_rpm_init: RPM firmware 3.0.16842958
280
[    0.173203] pm8018_probe: PMIC revision 1: F3
281
[    0.173233] pm8018_probe: PMIC revision 2: 08
282
[    0.173233] pm8018_probe: PMIC version: PM8018 rev 2.1
283
[    0.173264] pm8018_probe: PMIC Restart Reason: Triggered from KPD (power key press)
284
[    0.174240] pm_gpio_probe: OK: base=88, ngpio=6
285
[    0.174515] pm8xxx_mpp_probe: OK: base=94, ngpio=6
286
[    0.181962] cpufreq_table_init: CPU: 4 scaling frequencies supported.
287
[    0.186754] sps:REVISION of BAM 0xc6818000 is 0x5.
288
[    0.186784] sps:BAM 0x12244000 is registered.
289
[    0.187517] sps:sps is ready.
290
[    0.209034] bio: create slab <bio-0> at 0
291
[    0.209797] ION heap vmalloc created
292
[    0.209827] ION heap iommu created
293
[    0.209858] ION heap audio created at 46e01000 with size af000
294
[    0.210254] pm8xxx_pwm_probe: OK
295
[    0.210865] SCSI subsystem initialized
296
[    0.211048] usbcore: registered new interface driver usbfs
297
[    0.211200] usbcore: registered new interface driver hub
298
[    0.211414] usbcore: registered new device driver usb
299
[    0.212055] Registered led device: led:kb
300
[    0.212452] Advanced Linux Sound Architecture Driver Version 1.0.24.
301
[    0.213215] Switching to clocksource gp_timer
302
[    0.223134] NET: Registered protocol family 2
303
[    0.223378] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
304
[    0.223683] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
305
[    0.223744] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
306
[    0.223805] TCP: Hash tables configured (established 2048 bind 2048)
307
[    0.223836] TCP reno registered
308
[    0.223836] UDP hash table entries: 256 (order: 0, 4096 bytes)
309
[    0.223897] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
310
[    0.224629] NET: Registered protocol family 1
311
[    0.228231] Notify: smsm init
312
[    0.234518] NET: Registered protocol family 27
313
[    0.235373] apr_tal:Q6 Is Up
314
[    0.236593] modem_8960_init: modem fatal driver init'ed.
315
[    0.236868] lpass_fatal_init: lpass SSR driver init'ed.
316
[    0.237265] msm_rpm_log_probe: OK
317
[    0.249992] yaffs: yaffs built Jul 21 2016 14:54:39 Installing.
318
[    0.250053] msgmni has been set to 57
319
[    0.251701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
320
[    0.251732] io scheduler noop registered
321
[    0.251762] io scheduler deadline registered
322
[    0.251823] io scheduler cfq registered (default)
323
[    0.398596] apr_tal:Modem Is Up
324
[    0.409064] msm_serial: driver initialized
325
[    0.409217] msm_serial_hsl: detected port #0
326
[    0.409400] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16240000 (irq = 182) is a MSM
327
[    0.409522] msm_serial_hsl: console setup on port #0
328
[    0.834030] console [ttyHSL0] enabled
329
[    0.853807] msm_serial_hsl: driver initialized
330
[    0.865649] brd: module loaded
331
[    0.871600] loop: module loaded
332
[    0.874347] init gpio to irq = 0
333
[    0.877002] init gpio to irq = 312
334
[    0.880329] quectel_power_manager_probe: OK ###############################
335
[    0.973874] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
336
[    0.979490] qup_i2c qup_i2c.0: I2C slave addr:0xd not connected
337
[    0.985533] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
338
[    0.991973] qup_i2c qup_i2c.0: I2C slave addr:0xd not connected
339
[    0.997894] failed to read wcd9xxx register
340
[    1.002044] tabla-i2c-core 0-000d: Codec read failed
341
[    1.006989] failed to read the wcd9xxx status
342
[    1.014649] tabla-i2c-core: probe of 0-000d failed with error -107
343
[    1.019807] probe for other slaves devices of tabla
344
[    1.024690] probe for other slaves devices of tabla
345
[    1.029513] probe for other slaves devices of tabla
346
[    1.034457] i2c-core: driver [tabla-i2c-core] using legacy suspend method
347
[    1.041141] i2c-core: driver [tabla-i2c-core] using legacy resume method
348
[    1.049137] SCSI Media Changer driver v0.25 
349
[    1.053197] msm_nand_probe: phys addr 0x1b400000 
350
[    1.057134] msm_nand_probe: dmac 0x3
351
[    1.060643] msm_nand_probe: allocated dma buffer at ffdfe000, dma_addr 46a40000
352
[    1.068121] ONFI probe : Found a nonONFI Compliant device 
353
[    1.073462] status: c00020
354
[    1.076087] nandid: 1590aac8 maker c8 device aa
355
[    1.080604] Found a supported NAND device
356
[    1.084602] NAND Controller ID : 0x4030
357
[    1.088386] NAND Device ID  : 0x1590aac8
358
[    1.092293] Buswidth : 8 Bits
359
[    1.095284] Density  : 256 MByte
360
[    1.098458] Pagesize : 2048 Bytes
361
[    1.101754] Erasesize: 131072 Bytes
362
[    1.105264] Oobsize  : 64 Bytes
363
[    1.108377] CFG0 Init  : 0xa8d408c0
364
[    1.111826] CFG1 Init  : 0x0004745c
365
[    1.115336] ECCBUFCFG  : 0x00000203
366
[    1.118785] Creating 16 MTD partitions on "msm_nand":
367
[    1.123851] 0x0000050c0000-0x000005b00000 : "boot"
368
[    1.130260] 0x000000140000-0x0000004a0000 : "sbl2"
369
[    1.135479] 0x0000004a0000-0x000000800000 : "rpm"
370
[    1.140485] 0x000000800000-0x000000d80000 : "efs2"
371
[    1.145643] 0x000000d80000-0x0000012e0000 : "dsp1"
372
[    1.150770] 0x0000012e0000-0x000001d20000 : "dsp3"
373
[    1.156020] 0x000001d20000-0x000004fe0000 : "dsp2"
374
[    1.161147] 0x000004fe0000-0x0000050c0000 : "aboot"
375
[    1.166366] 0x000000000000-0x000000140000 : "mibib"
376
[    1.171493] 0x000005b00000-0x000009b60000 : "cache"
377
[    1.176773] 0x000009b60000-0x000009cc0000 : "misc"
378
[    1.181840] 0x000009cc0000-0x00000a720000 : "recovery"
379
[    1.187395] 0x00000a720000-0x00000a880000 : "fota"
380
[    1.192614] 0x00000a880000-0x00000bf60000 : "recoveryfs"
381
[    1.198382] 0x00000bf60000-0x00000d640000 : "system"
382
[    1.203754] 0x00000d640000-0x000010000000 : "userdata"
383
[    1.210407] rmnet_init: BAM devices[8]
384
[    1.218373] msm_otg msm_otg: msm_otg probe
385
[    1.221455] msm_otg msm_otg: failed to get phy_clk
386
[    1.226308] msm_otg msm_otg: OTG regs = c6828000
387
[    1.232595] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
388
[    1.251121] Initializing USB Mass Storage driver...
389
[    1.255211] usbcore: registered new interface driver usb-storage
390
[    1.260949] USB Mass Storage support registered.
391
[    1.265679] usbcore: registered new interface driver ums-alauda
392
[    1.271570] usbcore: registered new interface driver ums-cypress
393
[    1.277552] usbcore: registered new interface driver ums-datafab
394
[    1.283503] usbcore: registered new interface driver ums-freecom
395
[    1.289516] usbcore: registered new interface driver ums-isd200
396
[    1.295406] usbcore: registered new interface driver ums-jumpshot
397
[    1.301480] usbcore: registered new interface driver ums-karma
398
[    1.307309] usbcore: registered new interface driver ums-onetouch
399
[    1.313352] usbcore: registered new interface driver ums-sddr09
400
[    1.319304] usbcore: registered new interface driver ums-sddr55
401
[    1.325194] usbcore: registered new interface driver ums-usbat
402
[    1.330993] usbcore: registered new interface driver usb_ehset_test
403
[    1.337494] msm_hsic_peripheral msm_hsic_peripheral: HSIC Peripheral regs = c682a000
404
[    1.357912] msm_otg msm_otg: phy_reset: success
405
[    1.362368] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
406
[    1.367678] mbim_init: initialize 1 instances
407
[    1.372287] mbim_init: Initialized 1 ports
408
[    1.379429] rndis_qc_init: initialize rndis QC instance
409
[    1.384343] android_usb gadget: Mass Storage Function, version: 2009/09/11
410
[    1.390477] android_usb gadget: Number of LUNs=1
411
[    1.395147]  lun0: LUN: removable file: (no medium)
412
[    1.400457] android_usb gadget: android_usb ready
413
[    1.405005] msm_hsic_peripheral msm_hsic_peripheral: [ci13xxx_start] hw_ep_max = 32
414
[    1.412452] android_usb gadget: android_usb ready
415
[    1.417030] msm_hsic_peripheral msm_hsic_peripheral: CI13XXX_CONTROLLER_RESET_EVENT received
416
[    1.425423] msm_hsic_peripheral msm_hsic_peripheral: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
417
[    1.436105] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
418
[    1.443094] android_work: android_work: did not send uevent (0 0   (null))
419
[    1.450083] msm_hsic_peripheral msm_hsic_peripheral: HSIC-USB in low power mode
420
[    1.464764] couldn't get usb power supply
421
[    1.468976] diagchar initialized now
422
[    1.471814] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8018-core/pm8xxx-pwrkey/input/input0
423
[    1.485365] diag: Invalid Msg type 12 proc 2
424
[    1.505631] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
425
[    1.511948] i2c /dev entries driver
426
[    1.518480] pm8xxx_adc_probe: failed to request pa_therm vreg with error -19
427
[    1.545551] pm8xxx_tm_probe: OK
428
[    1.547932] cpuidle: using governor ladder
429
[    1.551747] cpuidle: using governor menu
430
[    1.556508] mmc0: mci-version: 18
431
[    1.560048] mmc0: bam physical base=0x12182000
432
[    1.563467] mmc0: bam virtual base=0xc6830000
433
[    1.567892] sps:BAM 0x12182000 is registered.
434
[    1.571982] mmc0: BAM device registered. bam_handle=0xc63c5000
435
[    1.578116] sps:REVISION of BAM 0xc6830000 is 0x5.
436
[    1.583335] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 130
437
[    1.589195] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012180800
438
[    1.597405] mmc0: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 136,368 dma -1 dmacrcri -1
439
[    1.606439] mmc0: 8 bit data mode disabled
440
[    1.609674] mmc0: 4 bit data mode enabled
441
[    1.613490] mmc0: polling status mode disabled
442
[    1.618098] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
443
[    1.624324] mmc0: Slot eject status = 0
444
[    1.627376] mmc0: Power save feature enable = 1
445
[    1.631893] mmc0: SPS-BAM data transfer mode available
446
[    1.637295] mmc1: mci-version: 18
447
[    1.645383] mmc1: bam physical base=0x12142000
448
[    1.654753] mmc1: bam virtual base=0xc686c000
449
[    1.660125] sps:BAM 0x12142000 is registered.
450
[    1.668243] mmc1: BAM device registered. bam_handle=0xc581b200
451
[    1.678284] sps:REVISION of BAM 0xc686c000 is 0x5.
452
[    1.692659] mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012142000 irq 129
453
[    1.703067] mmc1: Qualcomm MSM SDCC-DML at 0x0000000012140800
454
[    1.712955] mmc1: No card detect facilities available
455
[    1.722295] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma -1 dmacrcri -1
456
[    1.734594] mmc1: 8 bit data mode disabled
457
[    1.742591] mmc1: 4 bit data mode enabled
458
[    1.750556] mmc1: polling status mode disabled
459
[    1.754616] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
460
[    1.759682] mmc1: Slot eject status = 0
461
[    1.763497] mmc1: Power save feature enable = 1
462
[    1.767984] mmc1: SPS-BAM data transfer mode available
463
[    1.774484] logger: created 256K log 'log_main'
464
[    1.778330] logger: created 256K log 'log_events'
465
[    1.782908] logger: created 256K log 'log_radio'
466
[    1.787669] logger: created 256K log 'log_system'
467
[    1.842575] voice_allocate_shared_memory: ION memory allocation failed
468
[    1.853502] msm_pcm_probe: dev name msm-voip-dsp
469
[    1.868213] msm_pcm_probe: dev name msm-host-pcm-voice
470
[    1.873340] msm_pcm_probe: dev name msm-pcm-dsp
471
[    1.877033] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
472
[    1.883198] mdm9615_audio_init: Interface Type = -1
473
[    1.887868] ALSA device list:
474
[    1.890126]   No soundcards found.
475
[    1.893392] Netfilter messages via NETLINK v0.30.
476
[    1.898214] nf_conntrack version 0.5.0 (460 buckets, 1840 max)
477
[    1.904959] ip_set: protocol 6
478
[    1.907187] ip_tables: (C) 2000-2006 Netfilter Core Team
479
[    1.912620] TCP cubic registered
480
[    1.916954] NET: Registered protocol family 10
481
[    1.923332] ip6_tables: (C) 2000-2006 Netfilter Core Team
482
[    1.928094] NET: Registered protocol family 17
483
[    1.932153] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
484
[    1.939783] Registering SWP/SWPB emulation handler
485
[    1.947840] clock_late_init() disabled 42 unused clocks
486
[    1.955989] MSM Watchdog Initialized
487
[    1.958828] no pmic restart interrupt specified
488
[    1.964932] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-01 00:34:05 UTC (2045)
489
[    1.973172] yaffs: dev is 32505870 name is "mtdblock14" rw
490
[    1.977689] yaffs: passed flags ""
491
[    1.981016] yaffs: Attempting MTD mount of 31.14,"mtdblock14"
492
[    2.039401] yaffs: block 155 is bad
493
[    2.099435] sps:BAM 0x124c2000 is registered.
494
[    2.144208] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
495
[    3.018037] yaffs: yaffs_read_super: is_checkpointed 0
496
[    3.018129] VFS: Mounted root (yaffs2 filesystem) on device 31:14.
497
[    3.023805] Freeing init memory: 168K
498
[    3.319090] sps:BAM 0x12502000 is registered.
499
[    3.325194] enable_store: android_usb: already disabled
500
[    3.334014] usmd:register_sysctl_table success.
501
[    3.337982] frmnet_bind: RmNet(0) dual Speed, IN:ep8in OUT:ep5out
502
[    3.545734] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
503
[    3.551258] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
504
[    3.564596] android_work: android_work: did not send uevent (0 0   (null))
505
[    3.619960] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
506
[    3.625911] android_work: android_work: sent uevent USB_STATE=CONNECTED
507
[    3.631893] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
508
[    3.655241] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
509
[    3.726629] android_usb gadget: high speed config #1: android_usb
510
[    3.731848] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
511
[    3.738013] msm_otg msm_otg: Avail curr from USB = 500
512
[    3.743293] diag: USB connected
513
[    3.744575] sps:REVISION of BAM 0xc68b8000 is 0x5.
514
[    3.749855] android_work: android_work: sent uevent USB_STATE=CONNECTED
515
[    3.776468] diag: USB connected
516
[    3.834976] android_work: android_work: sent uevent USB_STATE=CONFIGURED
517
[    6.987578] yaffs: dev is 32505871 name is "mtdblock15" rw
518
[    6.992034] yaffs: passed flags ""
519
[    6.995513] yaffs: Attempting MTD mount of 31.15,"mtdblock15"
520
[    8.647001] yaffs: yaffs_read_super: is_checkpointed 0
521
[    8.682405] yaffs: dev is 32505865 name is "mtdblock9" rw
522
[    8.686983] yaffs: passed flags ""
523
[    8.690187] yaffs: Attempting MTD mount of 31.9,"mtdblock9"
524
[    8.692507] yaffs: yaffs_read_super: is_checkpointed 1
525
[    8.984709] adb_open
526
[    9.579856] yaffs: dev is 32505869 name is "mtdblock13" rw
527
[    9.590325] yaffs: passed flags ""
528
[    9.597192] yaffs: Attempting MTD mount of 31.13,"mtdblock13"
529
[    9.597222] yaffs: auto selecting yaffs2
530
[    9.676789] yaffs: yaffs_read_super: is_checkpointed 1
531
[    9.955012] mbim_open: Open mbim driver
532
[    9.959957] mbim_open: Lock mbim_dev->open_excl for open
533
[    9.971738] mbim_open: USB cable not connected
534
[    9.975553] mbim_open: Exit, mbim file opened
535
[   10.053410] smd_pkt_open: DATA9_CNTL open failed -19
536
[   10.085731] smd_pkt_open: DATA12_CNTL open failed -19
537
[   10.127941] smd_pkt_open: DATA13_CNTL open failed -19
538
[   10.175919] smd_pkt_open: DATA14_CNTL open failed -19
539
[   10.805707] qsmem_poll_timer_cb:67 Modem Msg received.
540
[   10.860521] nmea: smd opened
541
[   11.087746] dtr_smd_open smd_open_ret = 0(0 SUCCESS)
542
[   11.091744] DTR SMD EVENT OPEN
543
[   11.113016] buf:dtr_low-
544
[   11.115000] enter rt5616_modinit
545
[   11.125316] enter rt5616_i2c_probe
546
[   11.135571] enter rt5616_probe
547
[   11.137982] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:183
548
[   11.144239] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
549
[   11.150404] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
550
[   11.156874] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
551
[   11.178391] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:183
552
[   11.184098] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
553
[   11.193010] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
554
[   11.198687] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
555
[   11.204761] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
556
[   11.211597] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
557
[   11.217610] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
558
[   11.224019] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
559
[   11.230154] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
560
[   11.236593] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
561
[   11.242697] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
562
[   11.249290] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
563
[   11.255241] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
564
[   11.261742] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
565
[   11.267938] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
566
[   11.274408] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
567
[   11.280482] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
568
[   11.286952] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
569
[   11.292995] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
570
[   11.299496] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
571
[   11.305569] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
572
[   11.312314] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
573
[   11.318663] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
574
[   11.327697] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
575
[   11.333801] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
576
[   11.343567] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
577
[   11.349641] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
578
[   11.356111] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
579
[   11.362185] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
580
[   11.368655] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
581
[   11.374790] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
582
[   11.381291] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
583
[   11.387456] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
584
[   11.393834] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
585
[   11.400244] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
586
[   11.407172] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
587
[   11.413215] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
588
[   11.420845] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
589
[   11.426552] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
590
[   11.432992] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
591
[   11.439127] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
592
[   11.445566] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
593
[   11.451854] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
594
[   11.458263] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
595
[   11.464306] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
596
[   11.470746] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
597
[   11.476911] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
598
[   11.483351] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
599
[   11.489485] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
600
[   11.495925] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
601
[   11.501999] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
602
[   11.509720] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
603
[   11.514939] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
604
[   11.521471] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
605
[   11.527575] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
606
[   11.534472] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
607
[   11.540088] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
608
[   11.546864] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
609
[   11.552662] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
610
[   11.559133] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
611
[   11.565206] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
612
[   11.571799] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
613
[   11.577872] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
614
[   11.585502] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
615
[   11.590813] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
616
[   11.597192] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
617
[   11.603235] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
618
[   11.610102] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
619
[   11.616023] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
620
[   11.622524] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
621
[   11.628536] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
622
[   11.634945] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
623
[   11.641049] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
624
[   11.647489] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
625
[   11.657652] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
626
[   11.663268] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
627
[   11.670318] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
628
[   11.676697] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
629
[   11.682191] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
630
[   11.688661] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
631
[   11.694674] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
632
[   11.701327] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
633
[   11.707279] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
634
[   11.713902] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
635
[   11.719945] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
636
[   11.726323] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
637
[   11.732427] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
638
[   11.738989] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
639
[   11.744971] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
640
[   11.751838] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
641
[   11.757698] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
642
[   11.764169] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
643
[   11.770242] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
644
[   11.776743] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
645
[   11.782786] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
646
[   11.789317] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
647
[   11.795360] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
648
[   11.802105] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
649
[   11.808026] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
650
[   11.814497] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
651
[   11.820570] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
652
[   11.827102] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
653
[   11.833114] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
654
[   11.839676] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
655
[   11.845688] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
656
[   11.852372] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
657
[   11.858354] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
658
[   11.866809] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
659
[   11.872028] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
660
[   11.878498] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
661
[   11.884541] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
662
[   11.891103] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
663
[   11.897146] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
664
[   11.903555] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
665
[   11.909720] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
666
[   11.916191] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
667
[   11.922264] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
668
[   11.928795] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
669
[   11.934839] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
670
[   11.941339] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
671
[   11.947474] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
672
[   11.953914] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
673
[   11.960476] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
674
[   11.966519] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
675
[   11.972592] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
676
[   11.979093] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
677
[   11.985228] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
678
[   11.991698] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
679
[   11.997833] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
680
[   12.004272] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
681
[   12.010407] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
682
[   12.016847] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
683
[   12.022951] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
684
[   12.029452] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
685
[   12.035525] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
686
[   12.042026] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
687
[   12.048161] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
688
[   12.054600] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
689
[   12.061254] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
690
[   12.067266] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
691
[   12.073370] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
692
[   12.079993] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
693
[   12.085945] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
694
[   12.092385] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
695
[   12.098550] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
696
[   12.104959] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
697
[   12.111246] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
698
[   12.117564] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
699
[   12.123638] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
700
[   12.130138] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
701
[   12.136273] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
702
[   12.142713] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
703
[   12.148878] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
704
[   12.155318] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
705
[   12.161452] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
706
[   12.167892] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
707
[   12.173996] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
708
[   12.180894] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
709
[   12.187120] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
710
[   12.193071] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
711
[   12.199206] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
712
[   12.205646] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
713
[   12.213032] msm_dai_q6_dai_sec_auxpcm_probe
714
[   12.216297] msm_dai_q6_dai_sec_auxpcm_probe
715
[   12.224629] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:183
716
[   12.230276] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
717
[   12.236441] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
718
[   12.242820] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
719
[   12.248985] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
720
[   12.255424] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
721
[   12.261559] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
722
[   12.267999] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
723
[   12.274103] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
724
[   12.280604] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
725
[   12.286769] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
726
[   12.293178] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
727
[   12.299313] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
728
[   12.305753] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
729
[   12.311918] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
730
[   12.318358] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
731
[   12.324431] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
732
[   12.330932] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
733
[   12.337066] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
734
[   12.343537] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
735
[   12.349916] asoc: null-codec-dai <-> MultiMedia1 mapping ok
736
[   12.357698] asoc: null-codec-dai <-> MultiMedia2 mapping ok
737
[   12.364748] asoc: null-codec-dai <-> CS-VOICE mapping ok
738
[   12.372012] asoc: null-codec-dai <-> VoIP mapping ok
739
[   12.378666] asoc: null-codec-dai <-> SLIMBUS0_HOSTLESS mapping ok
740
[   12.386235] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
741
[   12.393285] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
742
[   12.400396] asoc: null-codec-dai <-> AUXPCM_HOSTLESS mapping ok
743
[   12.407843] asoc: null-codec-dai <-> VoLTE mapping ok
744
[   12.414375] asoc: null-codec-dai <-> DTMF_RX_HOSTLESS mapping ok
745
[   12.421822] asoc: msm-stub-tx <-> msm-dai-stub mapping ok
746
[   12.428658] asoc: msm-stub-tx <-> msm-dai-stub mapping ok
747
[   12.435464] asoc: msm-stub-rx <-> msm-dai-stub mapping ok
748
[   12.442301] asoc: msm-stub-tx <-> msm-dai-stub mapping ok
749
[   12.449107] asoc: msm-stub-rx <-> msm-dai-stub mapping ok
750
[   12.456096] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
751
[   12.463238] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
752
[   12.470441] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
753
[   12.477460] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
754
[   12.484541] asoc: rt5616-aif1 <-> msm-dai-q6.2 mapping ok
755
[   12.491530] asoc: rt5616-aif1 <-> msm-dai-q6.3 mapping ok
756
[   12.498397] asoc: msm-stub-rx <-> msm-dai-q6.12 mapping ok
757
[   12.505264] asoc: msm-stub-tx <-> msm-dai-q6.13 mapping ok
758
[   12.512223] asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping ok
759
[   12.519395] asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping ok
760
[   12.526598] asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping ok
761
-   47.270715] buf:+QFOPEN  passwd 
762
-  104.919975] buf:+QFCLOSE 0
763
-  121.510392] buf:+QFOPEN ?
764
[  391.714603] sps:BAM is already registered: 12502000
765
[  391.718571] usb_bam_init: register bam error -17
766
[  391.723088] usb_bam usb_bam: failed to initialize usb bam
767
[  391.728887] diag: USB disconnected
768
[  391.731603] frmnet_bind: RmNet(0) dual Speed, IN:ep13in OUT:ep7out
769
[  391.737158] sps:sps_device_reset:device handle should not be 0.
770
[  391.746009] usb_bam_reset: BAM reset failed
771
[  391.755959] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
772
[  391.761269] msm_otg msm_otg: Avail curr from USB = 2
773
[  391.766213] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
774
[  391.773264] android_work: android_work: did not send uevent (1 1   (null))
775
[  392.126384] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received
776
[  392.132305] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
777
[  392.138562] msm_otg msm_otg: Avail curr from USB = 0
778
[  392.144025] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
779
[  392.155409] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
780
[  392.198687] android_work: android_work: sent uevent USB_STATE=CONNECTED
781
[  392.204578] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
782
[  392.216145] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
783
[  392.235678] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
784
[  392.291957] android_usb gadget: high speed config #1: android_usb
785
[  392.298214] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
786
[  392.303586] msm_otg msm_otg: Avail curr from USB = 500
787
[  392.309110] diag: USB connected
788
[  392.315366] android_work: android_work: sent uevent USB_STATE=CONNECTED
789
[  392.341492] diag: USB connected
790
[  392.387700] android_work: android_work: sent uevent USB_STATE=CONFIGURED
791
[  436.916496] sps:BAM is already registered: 12502000
792
[  436.920158] usb_bam_init: register bam error -17
793
[  436.925041] usb_bam usb_bam: failed to initialize usb bam
794
[  436.930749] diag: USB disconnected
795
[  436.933221] adb_bind_config
796
[  436.935144] sps:sps_device_reset:device handle should not be 0.
797
[  436.945307] frmnet_bind: RmNet(0) dual Speed, IN:ep14in OUT:ep8out
798
[  436.950617] usb_bam_reset: BAM reset failed
799
[  436.960750] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
800
[  436.966091] msm_otg msm_otg: Avail curr from USB = 2
801
[  436.971036] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
802
[  436.978055] android_work: android_work: did not send uevent (1 1   (null))
803
[  437.171158] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received
804
[  437.177079] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
805
[  437.183335] msm_otg msm_otg: Avail curr from USB = 0
806
[  437.188768] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
807
[  437.198168] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
808
[  437.243644] android_work: android_work: sent uevent USB_STATE=CONNECTED
809
[  437.249565] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
810
[  437.260491] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
811
[  437.279078] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
812
[  437.336578] android_usb gadget: high speed config #1: android_usb
813
[  437.342713] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
814
[  437.348115] msm_otg msm_otg: Avail curr from USB = 500
815
[  437.353670] diag: USB connected
816
[  437.354768] msm_hsusb msm_hsusb: [ep_enable] enabling a non-empty endpoint!
817
[  437.363741] android_work: android_work: sent uevent USB_STATE=CONNECTED
818
[  437.437540] android_work: android_work: sent uevent USB_STATE=CONFIGURED
819
[  728.231893] [dsp_debug.c:dsp_read] Memory Invalid or not initialized, Base = 0x0, size = 0x0
820
[  748.249992] Ramdump(ramdump_smem-modem): Read when there's no dump available!
821 1 zecke
[  754.749549] Ramdump(ramdump_modem_sw): Read when there's no dump available!
822 4 zecke
</pre>
Add picture from clipboard (Maximum size: 48.8 MB)