Project

General

Profile

EC25 Linux » History » Version 7

laforge, 12/25/2016 04:27 PM

1 1 laforge
h1. EC25 Linux
2
3 7 laforge
h2. Kernel Version
4
5
* claims to be LNX.LE.5.0.1_rb1.12
6
* https://source.codeaurora.org/quic/femto/kernel/msm-3.10/tree/Makefile?h=caf/LNX.LE.5.0.1_rb1.21 states this ships 3.10.49
7
* actualy ships 3.18.20 ?!?
8
9
<pre>
10
for rev in `cat tags`; do patchsize=$(git diff -w $rev | wc -l); echo $patchsize $rev; done
11
8496400 LNX.LE.5.2-75040-9x40
12
8495851 LNX.LE.5.2-75075-9x40
13
8497159 LNX.LE.5.2-75110-9x40
14
8497416 LNX.LE.5.2-75128-9x40
15
8497603 LNX.LE.5.2-75177-9x40
16
8497603 LNX.LE.5.2-75190-9x40
17
444556 LNX.LE.5.3-76020-9x40
18
504035 LNX.LE.5.3-76035-9x40
19
540243 LNX.LE.5.3-76105-9x40
20
542904 LNX.LE.5.3-76132-9x40
21
516225 LNX.LE.5.3-79002-9x40
22
537202 LNX.LE.5.3-79003-9x40
23
542904 LNX.LE.5.3.1-82005-9x40
24
546475 LNX.LE.5.3.1-82011-9x40
25
542904 LNX.LE.5.3.c1-81026-9x40
26
8533963 LNX.LE.5.0-56003-9x40
27
8535277 LNX.LE.5.0-56005-9x40
28
8533539 LNX.LE.5.0-56009-9x40
29
8533462 LNX.LE.5.0-56016-9x40
30
8533414 LNX.LE.5.0-56020-9x40
31
</pre>
32
33
the above shows that @LNX.LE.5.3-76020-9x40@ is actually the closest tag to what Quectel is shipping.  But then, it still has more than 440k lines of diffstat, i.e. is significantly different.  More research is needed on why that is. Maybe Qualcomm has provided a non-tagged version to Quectel?
34
35 1 laforge
h2. bootloader
36
37
<pre>
38
Format: Log Type - Time(microsec) - Message - Optional Info
39
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
40
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2-00055
41
S - IMAGE_VARIANT_STRING=LAATANAZA
42
S - OEM_IMAGE_VERSION_STRING=becking-PC
43
S - Boot Config, 0x000002e1
44
B -      1216 - PBL, Start
45
B -      3723 - bootable_media_detect_entry, Start
46
B -      5002 - bootable_media_detect_success, Start
47
B -      5006 - elf_loader_entry, Start
48
B -      8457 - auth_hash_seg_entry, Start
49
B -      8678 - auth_hash_seg_exit, Start
50
B -     51007 - elf_segs_hash_verify_entry, Start
51
B -     90729 - PBL, End
52
B -     99247 - SBL1, Start
53
B -    157258 - pm_device_init, Start
54
B -    177388 - PM_SET_VAL:Skip
55
D -     18086 - pm_device_init, Delta
56
B -    178364 - boot_config_data_table_init, Start
57
D -    174917 - boot_config_data_table_init, Delta - (420 Bytes)
58
B -    356819 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
59
B -    363255 - sbl1_ddr_set_params, Start
60
B -    366823 - cpr_init, Start
61
D -        30 - cpr_init, Delta
62
B -    372374 - Pre_DDR_clock_init, Start
63
D -       213 - Pre_DDR_clock_init, Delta
64
D -         0 - sbl1_ddr_set_params, Delta
65
B -    385093 - pm_driver_init, Start
66
D -      4544 - pm_driver_init, Delta
67
B -    397537 - sbl1_qhsusb_al_do_fast_enum, Start
68
D -        30 - sbl1_qhsusb_al_do_fast_enum, Delta
69
B -    400495 - clock_init, Start
70
D -       152 - clock_init, Delta
71
B -    406290 - boot_flash_init, Start
72
D -     37667 - boot_flash_init, Delta
73
B -    448136 - Image Load, Start
74
D -     56608 - QSEE Image Loaded, Delta - (451980 Bytes)
75
B -    504744 - Image Load, Start
76
D -        30 - SEC Image Loaded, Delta - (0 Bytes)
77
B -    512278 - sbl1_efs_handle_cookies, Start
78
D -         0 - sbl1_efs_handle_cookies, Delta
79
B -    519567 - Image Load, Start
80
D -     31903 - RPM Image Loaded, Delta - (151152 Bytes)
81
B -    551531 - Image Load, Start
82
D -     20710 - APPSBL Image Loaded, Delta - (178836 Bytes)
83
B -    572271 - QSEE Execution, Start
84
D -       213 - QSEE Execution, Delta
85
B -    578036 - SBL1, End
86
D -    481076 - SBL1, Delta
87
S - Throughput, 2000 KB/s  (782388 Bytes,  268183 us)
88
S - DDR Frequency, 240 MHz
89
Android Bootloader - UART_DM Initialized!!!
90
[0] welcome to lk
91
92
[0] SCM call: 0x2000601 failed with :fffffffc
93
[0] Failed to initialize SCM
94
[10] platform_init()
95
[10] target_init()
96
[10] 111 flash->id=0x2690ac2c,supported_flash[0]=0x1590ac2c, flash->id2=0x54, supported_flash_id2=0x56[20] 111 flash->id=0x2690ac2c,supported_flash[1]=0x1590ac01, flash->id2=0x54, supported_flash_id2=0x56[30] 111 flash->id=0x2690ac2c,supported_flash[2]=0x1590ac2c, flash->id2=0x54, supported_flash_id2=0x57[30] 111 flash->id=0x2690ac2c,supported_flash[3]=0x1590aa2c, flash->id2=0x54, supported_flash_id2=0x6[40] 111 flash->id=0x2690ac2c,supported_flash[4]=0x2690ac2c, flash->id2=0x54, supported_flash_id2=0x54[50] smem ptable found: ver: 4 len: 16
97
[60] ERROR: No devinfo partition found
98
[60] Neither 'config' nor 'frp' partition found
99
[60] CTL+C key, enter the FastBoot
100
[90] @Ramos Read flag qpic_nand_read_page =0x2440, 
101
[90] @Ramos Read flag qpic_nand_read_page result=0, 
102
[90] flash_read_image: success (0 errors)
103
[100] @Ramos Ql_check_RestoreFlag:offset=940000, magic1=78e5d4c2,magic2=54f7d60e,linuxfs_restoreFlag=0, cefs_restoreFlag=0
104
[110] @Ramos Read flag qpic_nand_read_page =0x2440, 
105
[110] @Ramos Read flag qpic_nand_read_page result=0, 
106
[120] flash_read_image: success (0 errors)
107
[120] @Ramos Ql_check_RestoreFlag:offset=940000, magic1=78e5d4c2,magic2=54f7d60e,linuxfs_restoreFlag=0, cefs_restoreFlag=0
108
[130] BBBBLoading (boot) image (5259264): start
109
[650] BBBBBLoading (boot) image (5259264): done
110
[660] DTB Total entry: 25, DTB version: 3
111
[660] Using DTB entry 0x00000129/00010000/0x00000008/0 for device 0x00000129/00010000/0x00010008/0
112
[680] cmdline: noinitrd  rw console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1  earlycon=msm_hsl_uart,0x78b3000  androidboot.serialno=313a01a5 androidboot.baseband=msm rootfstype=ubifs rootflags=b[700] Updating device tree: start
113
[830] Updating device tree: done
114
[840] booting linux @ 0x80008000, ramdisk @ 0x80008000 (0), tags/device tree @ 0x81e00000
115
</pre>
116
117
h2. msm LNX version
118
119
<pre>
120
msm LNX.LE.5.0.1-57031-9x40 mdm9607-perf /dev/ttyHSL0
121
</pre>
122
123
h2. root password
124
125
@oelinux1@, like on EC20
126
127
h2. df
128
129
<pre>
130
root@mdm9607-perf:~# df
131
Filesystem           1K-blocks      Used Available Use% Mounted on
132
ubi0:rootfs              57132     37260     19872  65% /
133
ubi1:modem               60864     33804     27060  56% /firmware
134
tmpfs                       64         4        60   6% /dev
135
tmpfs                    79788        20     79768   0% /run
136
tmpfs                    79788        56     79732   0% /var/volatile
137
tmpfs                    79788         0     79788   0% /media/ram
138
ubi0:usrfs               55032       916     54116   2% /data
139
</pre>
140
141
h2. ps
142
143
<pre>
144
root@mdm9607-perf:~# ps axuw
145
PID   USER     TIME   COMMAND
146
    1 root       0:06 init [5]
147
    2 root       0:00 [kthreadd]
148
    3 root       0:00 [ksoftirqd/0]
149
    4 root       0:00 [kworker/0:0]
150
    5 root       0:00 [kworker/0:0H]
151
    6 root       0:00 [kworker/u2:0]
152
    7 root       0:00 [rcu_preempt]
153
    8 root       0:00 [rcu_sched]
154
    9 root       0:00 [rcu_bh]
155
   10 root       0:00 [khelper]
156
   11 root       0:00 [netns]
157
   12 root       0:00 [perf]
158
   13 root       0:00 [msm_watchdog]
159
   14 root       0:00 [smd_channel_clo]
160
   15 root       0:00 [smsm_cb_wq]
161
   16 root       0:00 [kworker/u2:1]
162
   17 root       0:00 [deferwq]
163
   18 root       0:00 [kworker/0:1]
164
   19 root       0:00 [irq/52-cpr]
165
   20 root       0:00 [mpm]
166
   21 root       0:00 [kworker/u2:2]
167
   22 root       0:00 [kworker/u2:3]
168
   29 root       0:00 [writeback]
169
   30 root       0:00 [crypto]
170
   31 root       0:00 [bioset]
171
   32 root       0:00 [kblockd]
172
   33 root       0:00 [system]
173
   34 root       0:00 [devfreq_wq]
174
   35 root       0:00 [cfg80211]
175
   36 root       0:00 [power_off_alarm]
176
   37 root       0:00 [kswapd0]
177
   38 root       0:00 [fsnotify_mark]
178
   46 root       0:00 [glink_ssr_wq]
179
   47 root       0:00 [apr_driver]
180
   48 root       0:00 [k_hsuart]
181
   49 root       0:00 [msm_serial_hs_0]
182
   50 root       0:00 [msm_serial_hs_0]
183
   51 root       0:00 [diag_real_time_]
184
   52 root       0:00 [diag_wq]
185
   53 root       0:00 [DIAG_USB_diag]
186
   54 root       0:00 [diag_cntl_wq]
187
   55 root       0:00 [diag_dci_wq]
188
   56 root       0:00 [DIAG_SMD_MODEM_]
189
   57 root       0:00 [DIAG_SMD_MODEM_]
190
   58 root       0:00 [DIAG_SMD_MODEM_]
191
   59 root       0:00 [DIAG_SMD_MODEM_]
192
   60 root       0:00 [DIAG_SMD_MODEM_]
193
   61 root       0:00 [DIAG_SMD_LPASS_]
194
   62 root       0:00 [DIAG_SMD_LPASS_]
195
   63 root       0:00 [DIAG_SMD_LPASS_]
196
   64 root       0:00 [DIAG_SMD_LPASS_]
197
   65 root       0:00 [DIAG_SMD_LPASS_]
198
   66 root       0:00 [DIAG_SMD_WCNSS_]
199
   67 root       0:00 [DIAG_SMD_WCNSS_]
200
   68 root       0:00 [DIAG_SMD_WCNSS_]
201
   69 root       0:00 [DIAG_SMD_WCNSS_]
202
   70 root       0:00 [DIAG_SMD_WCNSS_]
203
   71 root       0:00 [DIAG_SMD_SENSOR]
204
   72 root       0:00 [DIAG_SMD_SENSOR]
205
   73 root       0:00 [DIAG_SMD_SENSOR]
206
   74 root       0:00 [DIAG_SMD_SENSOR]
207
   75 root       0:00 [DIAG_SMD_SENSOR]
208
   76 root       0:00 [DIAG_SOCKMODEM_]
209
   77 root       0:00 [DIAG_SOCKMODEM_]
210
   78 root       0:00 [DIAG_SOCKMODEM_]
211
   79 root       0:00 [DIAG_SOCKMODEM_]
212
   80 root       0:00 [DIAG_SOCKMODEM_]
213
   81 root       0:00 [DIAG_SOCKLPASS_]
214
   82 root       0:00 [DIAG_SOCKLPASS_]
215
   83 root       0:00 [DIAG_SOCKLPASS_]
216
   84 root       0:00 [DIAG_SOCKLPASS_]
217
   85 root       0:00 [DIAG_SOCKLPASS_]
218
   86 root       0:00 [DIAG_SOCKWCNSS_]
219
   87 root       0:00 [DIAG_SOCKWCNSS_]
220
   88 root       0:00 [DIAG_SOCKWCNSS_]
221
   89 root       0:00 [DIAG_SOCKWCNSS_]
222
   90 root       0:00 [DIAG_SOCKWCNSS_]
223
   91 root       0:00 [DIAG_SOCKSENSOR]
224
   92 root       0:00 [DIAG_SOCKSENSOR]
225
   93 root       0:00 [DIAG_SOCKSENSOR]
226
   94 root       0:00 [DIAG_SOCKSENSOR]
227
   95 root       0:00 [DIAG_SOCKSENSOR]
228
   96 root       0:00 [DIAG_CNTL_SOCKE]
229
   97 root       0:00 [k_gserial]
230
   98 root       0:00 [k_ipa_usb]
231
   99 root       0:00 [uether]
232
  100 root       0:00 [k_gbridge]
233
  101 root       0:00 [therm_core:noti]
234
  102 root       0:00 [therm_core:noti]
235
  103 root       0:00 [therm_core:noti]
236
  104 root       0:00 [therm_core:noti]
237
  105 root       0:00 [therm_core:noti]
238
  106 root       0:00 [irq/216-tsens_i]
239
  107 root       0:00 [therm_core:noti]
240
  108 root       0:00 [therm_core:noti]
241
  109 root       0:00 [cfinteractive]
242
  110 root       0:00 [irq/170-7824900]
243
  111 root       0:00 [irq/155-mmc0]
244
  112 root       0:00 [irq/253-7864900]
245
  113 root       0:00 [irq/157-mmc1]
246
  114 root       0:00 [usb_bam_wq]
247
  115 root       0:00 [qsmd]
248
  116 root       0:00 [ipv6_addrconf]
249
  117 root       0:00 [msm_ipc_router]
250
  118 root       0:00 [irq/441-modem]
251
  119 root       0:00 [sysmon_wq]
252
  120 root       0:00 [qmi_svc_event_w]
253
  121 root       0:00 [kworker/0:2]
254
  122 root       0:00 [bam_dmux_rx]
255
  123 root       0:00 [bam_dmux_tx]
256
  124 root       0:00 [ubi_bgt0d]
257
  125 root       0:00 [ubi_bgt1d]
258
  126 root       0:00 [k_bam_data]
259
  127 root       0:00 [f_mtp]
260
  129 root       0:00 [msm_thermal:fre]
261
  130 root       0:00 [msm_thermal:the]
262
  131 root       0:00 [ubifs_bgt0_0]
263
  132 root       0:00 [IPCRTR]
264
  133 root       0:00 [modem_IPCRTR]
265
  185 root       0:00 [ubifs_bgt0_1]
266
  194 root       0:00 /sbin/adbd
267
  229 root       0:00 psmd
268
  323 root       0:00 ipacm_perf
269
  331 root       0:00 ipacmdiag
270
  342 root       0:00 QCMAP_ConnectionManager /etc/mobileap_cfg.xml d
271
  346 root       0:00 /usr/bin/qti
272
  357 root       0:00 /sbin/tftp_server
273
  358 root       0:00 /sbin/fs-scrub-daemon
274
  375 root       0:00 /usr/bin/quectel_pcm_daemon
275
  397 root       0:00 [sh]
276
  426 root       0:00 [kworker/u2:4]
277
  458 root       0:00 /sbin/syslogd -n -C64
278
  494 root       0:00 [k_gsmd]
279
  495 root       0:00 [k_gbam]
280
  509 root       0:00 /usr/bin/qmuxd
281
  514 root       0:00 /usr/bin/thermal-engine
282
  518 root       0:00 /usr/bin/netmgrd
283
  545 root       0:00 /usr/bin/qmi_shutdown_modem
284
  553 root       0:00 /usr/bin/quectel-gps-handle
285
  564 root       0:00 /usr/bin/quectel_monitor_daemon
286
  599 root       0:00 /usr/bin/quectel_daemon
287
  605 root       0:00 /usr/bin/quectel_psm_aware
288
  614 root       0:00 /usr/bin/quectel-remotefs-service
289
  699 root       0:00 alsaucm_test
290
  762 nobody     0:00 dnsmasq -i bridge0 -I lo -z --dhcp-range=bridge0,192.168.
291
  811 www-data   0:00 /usr/sbin/lighttpd -f /etc/lighttpd.conf
292
  823 root       0:00 eMBMs_TunnelingModule
293
  827 root       0:00 /usr/bin/qmi_ip_multiclient /etc/qmi_ip_cfg.xml
294
  869 root       0:00 wlan_services
295
  981 messageb   0:00 /usr/bin/dbus-daemon --system
296
 1003 root       0:00 /sbin/reboot-daemon
297
 1009 diag       0:00 /usr/bin/diagrebootapp
298
 1012 root       0:00 /usr/bin/atfwd_daemon
299
 1052 root       0:00 /usr/bin/pdc_daemon
300
 1070 root       0:00 /usr/bin/time_daemon
301
 1071 root       0:00 /usr/bin/mbimd
302
 1072 root       0:00 -sh
303
 1123 root       0:00 ps axuw
304
</pre>
305
306
h2. dmesg
307
308
<pre>
309
[    0.000000] Booting Linux on physical CPU 0x0
310
[    0.000000] Initializing cgroup subsys cpu
311
[    0.000000] Initializing cgroup subsys cpuacct
312
[    0.000000] Linux version 3.18.20 (becking@root-mdm9607) (gcc version 4.9.2 (GCC) ) #1 PREEMPT Sat Aug
313
 27 18:53:52 CST 2016
314
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
315
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
316
[    0.000000] Machine model: Qualcomm Technologies, Inc. MDM 9607 MTP
317
[    0.000000] Reserved memory: reserved region for node 'modem_adsp_region@0': base 0x82a00000, size 80 
318
MiB
319
[    0.000000] Reserved memory: reserved region for node 'cnss_debug_region@0': base 0x87a00000, size 2 M
320
iB
321
[    0.000000] Reserved memory: reserved region for node 'external_image_region@0': base 0x87c00000, size
322
 4 MiB
323
[    0.000000] Removed memory: created DMA memory pool at 0x82a00000, size 80 MiB
324
[    0.000000] Reserved memory: initialized node modem_adsp_region@0, compatible id removed-dma-pool
325
[    0.000000] Removed memory: created DMA memory pool at 0x87a00000, size 2 MiB
326
[    0.000000] Reserved memory: initialized node cnss_debug_region@0, compatible id removed-dma-pool
327
[    0.000000] Removed memory: created DMA memory pool at 0x87c00000, size 4 MiB
328
[    0.000000] Reserved memory: initialized node external_image_region@0, compatible id removed-dma-pool
329
[    0.000000] Reserved memory: allocated memory for 'audio_region@0' node: base 0x8fc00000, size 4 MiB
330
[    0.000000] Reserved memory: created CMA memory pool at 0x8fc00000, size 4 MiB
331
[    0.000000] Reserved memory: initialized node audio_region@0, compatible id shared-dma-pool
332
[    0.000000] cma: Reserved 4 MiB at 0x8f800000
333
[    0.000000] Memory policy: Data cache writeback
334
[    0.000000] On node 0 totalpages: 64000
335
[    0.000000] free_area_init_node: node 0, pgdat c0b2d288, node_mem_map cf5ce000
336
[    0.000000]   Normal zone: 512 pages used for memmap
337
[    0.000000]   Normal zone: 0 pages reserved
338
[    0.000000]   Normal zone: 64000 pages, LIFO batch:15
339
[    0.000000] CPU: All CPU(s) started in SVC mode.
340
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
341
[    0.000000] pcpu-alloc: [0] 0 
342
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 63488
343
[    0.000000] Kernel command line: noinitrd  rw console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci
344
-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1  earlycon=msm_hsl_uart,0x78b3000  androidboot
345
.serialno=313a01a5 androidboot.baseband=msm rootfstype=ubifs rootflags=bulk_read root=ubi0:rootfs ubi.mtd
346
=15 ubi.mtd=9
347
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
348
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
349
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
350
[    0.000000] Memory: 150460K/256000K available (7235K kernel code, 812K rwdata, 3096K rodata, 288K init
351
, 1145K bss, 105540K reserved)
352
[    0.000000] Virtual kernel memory layout:
353
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
354
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
355
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
356
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
357
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
358
[    0.000000]       .text : 0xc0008000 - 0xc0a1f0d4   (10333 kB)
359
[    0.000000]       .init : 0xc0a20000 - 0xc0a68000   ( 288 kB)
360
[    0.000000]       .data : 0xc0a68000 - 0xc0b33120   ( 813 kB)
361
[    0.000000]        .bss : 0xc0b331e4 - 0xc0c517e0   (1146 kB)
362
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
363
[    0.000000] Preemptible hierarchical RCU implementation.
364
[    0.000000] NR_IRQS:16 nr_irqs:16 16
365
[    0.000000] GIC CPU mask not found - kernel will fail to boot.
366
[    0.000000] GIC CPU mask not found - kernel will fail to boot.
367
[    0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
368
[    0.000000] MPM 1 irq mapping errored -517
369
[    0.000000] Architected mmio timer(s) running at 19.20MHz (virt).
370
[    0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
371
[    0.000025] Switching to timer-based delay loop, resolution 52ns
372
[    0.000044] Switched to clocksource arch_mem_counter
373
[    0.000729] Console: colour dummy device 80x30
374
[    0.000749] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS 
375
(lpj=192000)
376
[    0.000765] pid_max: default: 32768 minimum: 301
377
[    0.000877] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
378
[    0.000892] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
379
[    0.001546] Initializing cgroup subsys freezer
380
[    0.001573] Initializing cgroup subsys debug
381
[    0.001610] CPU: Testing write buffer coherency: ok
382
[    0.001962] Setting up static identity map for 0x806e0be0 - 0x806e0c38
383
[    0.002896] 
384
[    0.002896] **********************************************************
385
[    0.002913] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
386
[    0.002922] **                                                      **
387
[    0.002930] ** trace_printk() being used. Allocating extra memory.  **
388
[    0.002938] **                                                      **
389
[    0.002946] ** This means that this is a DEBUG kernel and it is     **
390
[    0.002954] ** unsafe for produciton use.                           **
391
[    0.002962] **                                                      **
392
[    0.002970] ** If you see this message and you are not debugging    **
393
[    0.002978] ** the kernel, report this immediately to your vendor!  **
394
[    0.002986] **                                                      **
395
[    0.002994] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
396
[    0.003002] **********************************************************
397
[    0.003832] MSM Memory Dump base table set up
398
[    0.003868] MSM Memory Dump apps data table set up
399
[    0.013449] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
400
[    0.015220] pinctrl core: initialized pinctrl subsystem
401
[    0.015646] regulator-dummy: no parameters
402
[    0.043886] NET: Registered protocol family 16
403
[    0.045792] DMA: preallocated 256 KiB pool for atomic coherent allocations
404
[    0.100106] cpuidle: using governor ladder
405
[    0.130098] cpuidle: using governor menu
406
[    0.160096] cpuidle: using governor qcom
407
[    0.168923] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
408
[    0.169213] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
409
[    0.171905] irq: no irq domain found for /soc/pinctrl@1000000 !
410
[    0.172966] irq: no irq domain found for /soc/pinctrl@1000000 !
411
[    0.177867] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
412
[    0.180640] platform 4080000.qcom,mss: assigned reserved memory node modem_adsp_region@0
413
[    0.181049] irq: no irq domain found for /soc/pinctrl@1000000 !
414
[    0.181455] irq: no irq domain found for /soc/pinctrl@1000000 !
415
[    0.182295] mem_acc_corner: 0 <--> 0 mV 
416
[    0.183256] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
417
[    0.183270] hw-breakpoint: maximum watchpoint size is 8 bytes.
418
[    0.184289] gpiochip_add: registered GPIOs 0 to 79 on device: 1000000.pinctrl
419
[    0.184309] GPIO chip 1000000.pinctrl: created GPIO range 0->79 ==> 1000000.pinctrl PIN 0->79
420
[    0.184889] __of_mpm_init(): MPM driver mapping exists
421
[    0.185424] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
422
[    0.185440] msm_rpm_dev_probe: APSS-RPM communication over SMD
423
[    0.185452] smd_open() before smd_init()
424
[    0.186082] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
425
[    0.188401] smd_channel_probe_now: allocation table not initialized
426
[    0.190696] mdm9607_s1: 1050 <--> 1350 mV at 1225 mV normal idle 
427
[    0.190868] spm_regulator_probe: name=mdm9607_s1, range=LV, voltage=1225000 uV, mode=AUTO, step rate=4800 uV/us
428
[    0.191383] cpr_efuse_init: apc_corner: efuse_addr = 0x000a4000 (len=0x1000)
429
[    0.191433] cpr_read_fuse_revision: apc_corner: fuse revision = 2
430
[    0.191453] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0x97590032313a01a5, speed_bits = 4
431
[    0.191535] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1100000 1250000] uV
432
[    0.191550] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV
433
[    0.191563] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1150000] uV
434
[    0.192204] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
435
[    0.192282] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
436
[    0.192300] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
437
[    0.195274] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,core-limit-temp. err=-22. KTM continues
438
[    0.195309] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
439
[    0.195359] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
440
[    0.196387] sps:sps is ready.
441
[    0.198421] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
442
[    0.198437] msm_rpm_dev_probe: APSS-RPM communication over SMD
443
[    0.199447] mdm9607_s2: 750 <--> 1275 mV at 750 mV normal idle 
444
[    0.200421] mdm9607_s3_level: 0 <--> 0 mV at 0 mV normal idle 
445
[    0.200972] mdm9607_s3_level_ao: 0 <--> 0 mV at 0 mV normal idle 
446
[    0.201536] mdm9607_s3_floor_level: 0 <--> 0 mV at 0 mV normal idle 
447
[    0.202065] mdm9607_s3_level_so: 0 <--> 0 mV at 0 mV normal idle 
448
[    0.202788] mdm9607_s4: 1800 <--> 1950 mV at 1800 mV normal idle 
449
[    0.203543] mdm9607_l1: 1250 mV normal idle 
450
[    0.204305] mdm9607_l2: 1800 mV normal idle 
451
[    0.205036] mdm9607_l3: 1800 mV normal idle 
452
[    0.205778] mdm9607_l4: 3075 mV normal idle 
453
[    0.206556] mdm9607_l5: 1700 <--> 3050 mV at 1700 mV normal idle 
454
[    0.207260] mdm9607_l6: 1700 <--> 3050 mV at 1700 mV normal idle 
455
[    0.207955] mdm9607_l7: 1700 <--> 1900 mV at 1700 mV normal idle 
456
[    0.208680] mdm9607_l8: 1800 mV normal idle 
457
[    0.209361] mdm9607_l9: 1200 <--> 1250 mV at 1200 mV normal idle 
458
[    0.210352] mdm9607_l10: 1050 mV normal idle 
459
[    0.211117] mdm9607_l11: 1800 mV normal idle 
460
[    0.211818] mdm9607_l12_level: 0 <--> 0 mV at 0 mV normal idle 
461
[    0.212389] mdm9607_l12_level_ao: 0 <--> 0 mV at 0 mV normal idle 
462
[    0.212935] mdm9607_l12_level_so: 0 <--> 0 mV at 0 mV normal idle 
463
[    0.213449] mdm9607_l12_floor_lebel: 0 <--> 0 mV at 0 mV normal idle 
464
[    0.214202] mdm9607_l13: 1800 <--> 2850 mV at 2850 mV normal idle 
465
[    0.214923] mdm9607_l14: 2650 <--> 3000 mV at 2650 mV normal idle 
466
[    0.215174] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
467
[    0.215490] cpr_efuse_init: apc_corner: efuse_addr = 0x000a4000 (len=0x1000)
468
[    0.215540] cpr_read_fuse_revision: apc_corner: fuse revision = 2
469
[    0.215559] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0x97590032313a01a5, speed_bits = 4
470
[    0.215641] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1100000 1250000] uV
471
[    0.215656] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV
472
[    0.215669] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1150000] uV
473
[    0.215888] cpr_init_cpr_parameters: apc_corner: up threshold = 2, down threshold = 3
474
[    0.215918] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
475
[    0.215950] cpr_init_cpr_efuse: apc_corner: [row:65] = 0x15600283283372
476
[    0.215972] cpr_init_cpr_efuse: apc_corner: CPR disable fuse = 0
477
[    0.215986] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 0, target quot = 643
478
[    0.215999] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 0, target quot = 643
479
[    0.216012] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 0, target quot = 882
480
[    0.216195] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
481
[    0.216686] apc_corner: 0 <--> 0 mV 
482
[    0.217181] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
483
[    0.217258] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
484
[    0.217275] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
485
[    0.217795] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,core-limit-temp. err=-22. KTM continues
486
[    0.217825] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
487
[    0.217945] msm_thermal:get_kernel_cluster_info CPU0 topology not initialized.
488
[    0.218401] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
489
[    0.218417] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
490
[    0.218428] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
491
[    0.218893] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
492
[    0.218909] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
493
[    0.218924] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
494
[    0.218934] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
495
[    0.229022] qcom,gcc-mdm9607 1800000.qcom,gcc: Registered GCC clocks
496
[    0.229440] clock-a7 b010008.qcom,clock-a7: Speed bin: 4 PVS Version: 0
497
[    0.229519] a7ssmux: set OPP pair(400000000 Hz: 1 uV) on cpu0
498
[    0.229555] a7ssmux: set OPP pair(1305600000 Hz: 7 uV) on cpu0
499
[    0.231105] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
500
[    0.231190] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
501
[    0.231208] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
502
[    0.281649] gpiochip_find_base: found new base at 1018
503
[    0.281812] gpiochip_add: registered GPIOs 1018 to 1023 on device: pm8019-gpio
504
[    0.282108] qcom,qpnp-pin qpnp-pin-cf30ec00: qpnp_pin_probe: gpio_chip registered between 1018-1023
505
[    0.282283] gpiochip_find_base: found new base at 1012
506
[    0.282412] gpiochip_add: registered GPIOs 1012 to 1017 on device: pm8019-mpp
507
[    0.282843] qcom,qpnp-pin qpnp-pin-cf30ee00: qpnp_pin_probe: gpio_chip registered between 1012-1017
508
[    0.283137] KPI: Bootloader start count = 21414
509
[    0.283151] KPI: Bootloader end count = 49438
510
[    0.283162] KPI: Bootloader display count = 3135809712
511
[    0.283172] KPI: Bootloader load kernel count = 17006
512
[    0.283182] KPI: Kernel MPM timestamp = 70838
513
[    0.283192] KPI: Kernel MPM Clock frequency = 32768
514
[    0.283223] socinfo_print: v0.10, id=297, ver=1.0, raw_id=72, raw_ver=0, hw_plat=8, hw_plat_ver=65536
515
[    0.283223]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65539, pmic_die_revision=131074 foundry_id=1 serial_number=825885093
516
[    0.283609] of_get_named_gpiod_flags: parsed 'gpio' property of node '/soc/sdcard_ext_vreg[0]' - status (0)
517
[    0.283817] sdcard_ext_vreg: no parameters
518
[    0.284046] of_get_named_gpiod_flags: parsed 'gpio' property of node '/soc/rome_vreg[0]' - status (0)
519
[    0.284249] rome_vreg: no parameters
520
[    0.284414] of_get_named_gpiod_flags: parsed 'gpio' property of node '/soc/emac_lan_vreg[0]' - status (0)
521
[    0.284586] emac_lan_vreg: no parameters
522
[    0.285674] SCSI subsystem initialized
523
[    0.285892] usbcore: registered new interface driver usbfs
524
[    0.285978] usbcore: registered new interface driver hub
525
[    0.286169] usbcore: registered new device driver usb
526
[    0.287146] cpufreq: driver msm up and running
527
[    0.287641] platform soc:qcom,ion:qcom,ion-heap@28: assigned reserved memory node audio_region@0
528
[    0.287938] ION heap system created
529
[    0.288125] ION heap audio created at 0x8fc00000 with size 400000
530
[    0.288463] msm_bus_fabric_init_driver
531
[    0.295560] qcom,qpnp-power-on qpnp-power-on-cf30e200: PMIC@SID0 Power-on reason: Triggered from CBL (external power supply) and 'cold' boot
532
[    0.295589] qcom,qpnp-power-on qpnp-power-on-cf30e200: PMIC@SID0: Unknown power-off reason
533
[    0.295810] input: qpnp_pon as /devices/virtual/input/input0
534
[    0.296252] PMIC@SID0: PM8019 v2.2 options: 3, 2, 2, 2
535
[    0.297342] Advanced Linux Sound Architecture Driver Initialized.
536
[    0.297927] Bluetooth: Core ver 2.19
537
[    0.297977] NET: Registered protocol family 31
538
[    0.297986] Bluetooth: HCI device and connection manager initialized
539
[    0.298000] Bluetooth: HCI socket layer initialized
540
[    0.298012] Bluetooth: L2CAP socket layer initialized
541
[    0.298055] Bluetooth: SCO socket layer initialized
542
[    0.298325] cfg80211: Calling CRDA to update world regulatory domain
543
[    0.298355] cfg80211: World regulatory domain updated:
544
[    0.298364] cfg80211:  DFS Master region: unset
545
[    0.298373] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
546
[    0.298384] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
547
[    0.298394] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
548
[    0.298403] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
549
[    0.298413] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
550
[    0.298423] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
551
[    0.298433] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
552
[    0.298443] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
553
[    0.298453] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
554
[    0.299298] Switched to clocksource arch_mem_counter
555
[    0.321612] NET: Registered protocol family 2
556
[    0.322223] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
557
[    0.322258] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
558
[    0.322304] TCP: Hash tables configured (established 2048 bind 2048)
559
[    0.322353] TCP: reno registered
560
[    0.322366] UDP hash table entries: 256 (order: 1, 12288 bytes)
561
[    0.322389] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
562
[    0.322546] NET: Registered protocol family 1
563
[    0.324203] futex hash table entries: 256 (order: 0, 7168 bytes)
564
[    0.329168] msgmni has been set to 309
565
[    0.330756] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
566
[    0.330776] io scheduler noop registered
567
[    0.330790] io scheduler deadline registered
568
[    0.330897] io scheduler cfq registered (default)
569
[    0.330988] gpiochip_find_base: found new base at 980
570
[    0.331091] gpiochip_add: registered GPIOs 980 to 1011 on device: smp2p
571
[    0.331237] gpiochip_find_base: found new base at 948
572
[    0.331328] gpiochip_add: registered GPIOs 948 to 979 on device: smp2p
573
[    0.331365] gpiochip_find_base: found new base at 916
574
[    0.331451] gpiochip_add: registered GPIOs 916 to 947 on device: smp2p
575
[    0.331589] gpiochip_find_base: found new base at 884
576
[    0.331680] gpiochip_add: registered GPIOs 884 to 915 on device: smp2p
577
[    0.331715] gpiochip_find_base: found new base at 852
578
[    0.331803] gpiochip_add: registered GPIOs 852 to 883 on device: slave-kernel
579
[    0.331904] gpiochip_find_base: found new base at 852
580
[    0.331986] gpiochip_add: registered GPIOs 852 to 883 on device: master-kernel
581
[    0.336911] msm_rpm_log_probe: OK
582
[    0.337731] of_get_named_gpiod_flags: parsed 'qcom,gpio-proxy-unvote' property of node '/soc/qcom,mss@4080000[0]' - status (-517)
583
[    0.338753] of_get_named_gpiod_flags: can't parse 'qcom,tx-gpio' property of node '/soc/uart@78b1000[0]'
584
[    0.338766] uart_tx_gpio is not available
585
[    0.338776] of_get_named_gpiod_flags: can't parse 'qcom,rx-gpio' property of node '/soc/uart@78b1000[0]'
586
[    0.338784] uart_rx_gpio is not available
587
[    0.338794] of_get_named_gpiod_flags: can't parse 'qcom,cts-gpio' property of node '/soc/uart@78b1000[0]'
588
[    0.338801] uart_cts_gpio is not available
589
[    0.338811] of_get_named_gpiod_flags: can't parse 'qcom,rfr-gpio' property of node '/soc/uart@78b1000[0]'
590
[    0.338818] uart_rfr_gpio is not available
591
[    0.339345] sps: BAM device 0x07884000 is not registered yet.
592
[    0.339620] sps:BAM 0x07884000 is registered.
593
[    0.341775] 78b1000.uart: ttyHS0 at MMIO 0x78b1000 (irq = 151, base_baud = 460800) is a MSM HS UART
594
[    0.343639] msm_serial_hs module loaded
595
[    0.344007] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
596
[    0.344044] AXI: get_pdata(): Error: Client name not found
597
[    0.344053] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
598
[    0.344062] msm_serial_hsl_probe: Bus scaling is disabled
599
[    0.344191] 78b3000.serial: ttyHSL0 at MMIO 0x78b3000 (irq = 153, base_baud = 460800) is a MSM
600
[    0.344542] msm_serial_hsl_init: driver initialized
601
[    0.358411] brd: module loaded
602
[    0.361024] loop: module loaded
603
[    0.362639] [Max][DTR]  [quectel_power_manager_probe:391] 
604
[    0.362733] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/quec,quectel-power-manager[0]' - status (0)
605
[    0.362746] [Max][DTR] quectel_dt_parse_gpio_info: cnt: 0, gpio[dtr] = 5
606
[    0.362766] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/quec,quectel-power-manager[1]' - status (0)
607
[    0.362778] [Max][DTR] quectel_dt_parse_gpio_info: cnt: 1, gpio[wakeup_in] = 25
608
[    0.362801] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/quec,quectel-power-manager[2]' - status (0)
609
[    0.362812] [Max][DTR] quectel_dt_parse_gpio_info: cnt: 2, gpio[sleep_ind] = 42
610
[    0.362822] [Max][DTR] quectel_power_manager_probe: find dtr: 5 
611
[    0.362829] [Max][DTR] quectel_power_manager_probe: find wakeup_in: 25 
612
[    0.362837] [Max][DTR] quectel_power_manager_probe: find sleep_ind: 42 
613
[    0.363061] [Max][DTR] quectel_power_manager_probe: OK ###############################
614
[    0.363328] i2c-core: driver [tabla-i2c-core] using legacy suspend method
615
[    0.363338] i2c-core: driver [tabla-i2c-core] using legacy resume method
616
[    0.363453] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
617
[    0.363462] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
618
[    0.363565] i2c-core: driver [tasha-i2c-core] using legacy suspend method
619
[    0.363573] i2c-core: driver [tasha-i2c-core] using legacy resume method
620
[    0.363746] SCSI Media Changer driver v0.25 
621
[    0.367443] sps: BAM device 0x07984000 is not registered yet.
622
[    0.367718] sps:BAM 0x07984000 is registered.
623
[    0.367738] msm_nand_bam_init: msm_nand_bam_init: BAM device registered: bam_handle 0xceafbc00
624
[    0.367951] sps:BAM 0x07984000 (va:0xd09a0000) enabled: ver:0x18, number of pipes:7
625
[    0.369930] msm_nand_parse_smem_ptable: Parsing partition table info from SMEM
626
[    0.369972] msm_nand_parse_smem_ptable: SMEM partition table found: ver: 4 len: 16
627
[    0.369999] msm_nand_version_check: nand_major:1, nand_minor:5, qpic_major:1, qpic_minor:5
628
[    0.370038] msm_nand_scan: NAND Id: 0x2690ac2c Buswidth: 8Bits Density: 512 MByte
629
[    0.370148] msm_nand_scan: pagesize: 4096 Erasesize: 262144 oobsize: 224 (in Bytes)
630
[    0.370157] msm_nand_scan: BCH ECC: 8 Bit
631
[    0.370171] msm_nand_scan: CFG0: 0x290409c0,           CFG1: 0x08045d5c
632
[    0.370171]             RAWCFG0: 0x2b8401c0,        RAWCFG1: 0x0005055d
633
[    0.370171]           ECCBUFCFG: 0x00000203,      ECCBCHCFG: 0x42040d10
634
[    0.370171]           RAWECCCFG: 0x42000d11, BAD BLOCK BYTE: 0x00000175
635
[    0.370193] Creating 16 MTD partitions on "7980000.nand":
636
[    0.370206] 0x000000000000-0x000000280000 : "sbl"
637
[    0.370922] 0x000000280000-0x000000500000 : "mibib"
638
[    0.371481] 0x000000500000-0x000001b00000 : "efs2"
639
[    0.372041] 0x000001b00000-0x000002500000 : "sys_rev"
640
[    0.372602] 0x000002500000-0x000002800000 : "tz"
641
[    0.373176] 0x000002800000-0x000002b00000 : "rpm"
642
[    0.373748] 0x000002b00000-0x000002e00000 : "aboot"
643
[    0.374326] 0x000002e00000-0x000003800000 : "boot"
644
[    0.374909] 0x000003800000-0x000004880000 : "scrub"
645
[    0.375513] 0x000004880000-0x0000098c0000 : "modem"
646
[    0.376071] 0x0000098c0000-0x000009bc0000 : "misc"
647
[    0.376621] 0x000009bc0000-0x00000a5c0000 : "recovery"
648
[    0.377163] 0x00000a5c0000-0x00000b9c0000 : "fota"
649
[    0.377740] 0x00000b9c0000-0x00000d7c0000 : "recoveryfs"
650
[    0.378319] 0x00000d7c0000-0x000013bc0000 : "sys_back"
651
[    0.378899] 0x000013bc0000-0x000020000000 : "system"
652
[    0.379492] msm_nand_probe: NANDc phys addr 0x7980000, BAM phys addr 0x7984000, BAM IRQ 164
653
[    0.379504] msm_nand_probe: Allocated DMA buffer at virt_addr 0xcf844000, phys_addr 0x8f844000
654
[    0.381895] PPP generic driver version 2.4.2
655
[    0.383141] cnss_configure_ramdump: ramdump addr: d2c00000, phys: 0x87a00000 subsys:'AR6320'
656
[    0.383501] subsys-restart: subsys_set_state(): [cf044000]: subsys_set_state 1
657
[    0.383563] cnss_sdio 87a00000.qcom,cnss-sdio: CNSS SDIO Driver registered
658
[    0.384071] msm_otg 78d9000.usb: msm_otg probe
659
[    0.384267] of_get_named_gpiod_flags: can't parse 'qcom,hub-reset-gpio' property of node '/soc/usb@78d9000[0]'
660
[    0.384280] of_get_named_gpiod_flags: can't parse 'qcom,sw-sel-gpio' property of node '/soc/usb@78d9000[0]'
661
[    0.384315] of_get_named_gpiod_flags: parsed 'qcom,usbid-gpio' property of node '/soc/usb@78d9000[0]' - status (0)
662
[    0.384335] of_get_named_gpiod_flags: can't parse 'qcom,hsusb-otg-vddmin-gpio' property of node '/soc/usb@78d9000[0]'
663
[    0.386080] msm_otg 78d9000.usb: OTG regs = d08ee000
664
[    0.388188] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
665
[    0.388506] ehci-msm: Qualcomm On-Chip EHCI Host Controller
666
[    0.388829] usbcore: registered new interface driver cdc_acm
667
[    0.388838] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
668
[    0.388918] usbcore: registered new interface driver usb-storage
669
[    0.388963] usbcore: registered new interface driver ums-alauda
670
[    0.389006] usbcore: registered new interface driver ums-cypress
671
[    0.389048] usbcore: registered new interface driver ums-datafab
672
[    0.389090] usbcore: registered new interface driver ums-freecom
673
[    0.389131] usbcore: registered new interface driver ums-isd200
674
[    0.389173] usbcore: registered new interface driver ums-jumpshot
675
[    0.389214] usbcore: registered new interface driver ums-karma
676
[    0.389256] usbcore: registered new interface driver ums-onetouch
677
[    0.389297] usbcore: registered new interface driver ums-sddr09
678
[    0.389349] usbcore: registered new interface driver ums-sddr55
679
[    0.389393] usbcore: registered new interface driver ums-usbat
680
[    0.389446] usbcore: registered new interface driver usb_ehset_test
681
[    0.390646] gbridge_init: gbridge_init successs.
682
[    0.392096] qcom,qpnp-rtc qpnp-rtc-cf30ea00: rtc core: registered qpnp_rtc as rtc0
683
[    0.392346] i2c /dev entries driver
684
[    0.393036] unable to find DT imem DLOAD mode node
685
[    0.393325] unable to find DT imem EDLOAD mode node
686
[    0.393566] unable to find DT imem dload-type node
687
[    0.396381] msm_otg 78d9000.usb: phy_reset: success
688
[    0.414812] Bluetooth: HCI UART driver ver 2.2
689
[    0.414827] Bluetooth: HCI H4 protocol initialized
690
[    0.414836] Bluetooth: HCI_IBS protocol initialized
691
[    0.414967] of_get_named_gpiod_flags: parsed 'qca,bt-reset-gpio' property of node '/bt_qca6174[0]' - status (0)
692
[    0.414981] bt_dt_parse_vreg_info: qca,bt-vdd-core: is not provided in device tree
693
[    0.415025] bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
694
[    0.415035] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
695
[    0.415045] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
696
[    0.415871] sdhci: Secure Digital Host Controller Interface driver
697
[    0.415883] sdhci: Copyright(c) Pierre Ossman
698
[    0.415895] sdhci-pltfm: SDHCI platform and OF driver helper
699
[    0.416318] sdhci_msm 7824900.sdhci: sdhci_msm_probe: ICE device is not enabled
700
[    0.416344] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/sdhci@7824900[0]'
701
[    0.416365] sdhci_msm 7824900.sdhci: No vreg data found for vdd
702
[    0.416536] sdhci_msm 7824900.sdhci: sdhci_msm_pm_qos_parse_irq: error -22 reading irq cpu
703
[    0.416548] sdhci_msm 7824900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for IRQ will be disabled
704
[    0.416561] sdhci_msm 7824900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for cpu group will be disabled
705
[    0.419001] sdhci_msm 7824900.sdhci: sdhci_msm_probe: sdiowakeup_irq = 354
706
[    0.419359] sdhci_msm 7824900.sdhci: No vmmc regulator found
707
[    0.419372] sdhci_msm 7824900.sdhci: No vqmmc regulator found
708
[    0.419719] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA in legacy mode
709
[    0.448402] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
710
[    0.448423] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/sdhci@07864900[0]'
711
[    0.448678] sdhci_msm 7864900.sdhci: sdhci_msm_pm_qos_parse_irq: error -22 reading irq cpu
712
[    0.448690] sdhci_msm 7864900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for IRQ will be disabled
713
[    0.448704] sdhci_msm 7864900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for cpu group will be disabled
714
[    0.455863] sdhci_msm 7864900.sdhci: No vmmc regulator found
715
[    0.455880] sdhci_msm 7864900.sdhci: No vqmmc regulator found
716
[    0.456247] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA in legacy mode
717
[    0.485495] usbcore: registered new interface driver usbhid
718
[    0.485507] usbhid: USB HID core driver
719
[    0.486860] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
720
[    0.487468] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
721
[    0.487807] coresight-fuse a601c.fuse: QPDI fuse not specified
722
[    0.487895] coresight-fuse a601c.fuse: Fuse initialized
723
[    0.490894] coresight-csr 6001000.csr: CSR initialized
724
[    0.494779] coresight-tmc 6026000.tmc: Byte Counter feature enabled
725
[    0.495208] sps:BAM 0x06084000 is registered.
726
[    0.495457] coresight-tmc 6026000.tmc: TMC initialized
727
[    0.495744] coresight-tmc 6025000.tmc: TMC initialized
728
[    0.497229] nidnt boot config: 0
729
[    0.498006] coresight-tpiu 6020000.tpiu: NIDnT on SDCARD only mode
730
[    0.498130] coresight-tpiu 6020000.tpiu: TPIU initialized
731
[    0.499184] coresight-replicator 6024000.replicator: REPLICATOR initialized
732
[    0.499695] coresight-stm 6002000.stm: STM initialized
733
[    0.500312] coresight-hwevent 606c000.hwevent: Hardware Event driver initialized
734
[    0.501492] @Ramos Qstart_init entry !!!
735
[    0.501793] [Max][SMEM] qsmem_init running: misc_register return 0
736
[    0.501810] [Sunyd]==========>>[SMD] qsmd_init running...
737
[    0.504308] sps:BAM 0x078c4000 is registered.
738
[    0.504357] IPA HW is not supported on this target
739
[    0.514794] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
740
[    0.516424] msm_pcm_probe: dev name soc:qcom,msm-voice-host-pcm
741
[    0.521180] mdm9607-asoc-tomtom soc:sound: ASoC: platform (null) not registered
742
[    0.521511] Netfilter messages via NETLINK v0.30.
743
[    0.521581] nf_conntrack version 0.5.0 (2478 buckets, 9912 max)
744
[    0.521970] ctnetlink v0.93: registering with nfnetlink.
745
[    0.522268] ip_set: protocol 6
746
[    0.522627] ip_tables: (C) 2000-2006 Netfilter Core Team
747
[    0.522784] arp_tables: (C) 2002 David S. Miller
748
[    0.522819] TCP: cubic registered
749
[    0.523292] NET: Registered protocol family 10
750
[    0.524260] ip6_tables: (C) 2000-2006 Netfilter Core Team
751
[    0.524476] sit: IPv6 over IPv4 tunneling driver
752
[    0.525026] NET: Registered protocol family 17
753
[    0.525107] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
754
[    0.525141] Bridge firewalling registered
755
[    0.525156] Ebtables v2.0 registered
756
[    0.526143] NET: Registered protocol family 27
757
[    0.528297] gpiochip_find_base: found new base at 852
758
[    0.528411] gpiochip_add: registered GPIOs 852 to 883 on device: slave-kernel
759
[    0.528640] gpiochip_find_base: found new base at 820
760
[    0.528740] gpiochip_add: registered GPIOs 820 to 851 on device: master-kernel
761
[    0.529156] of_get_named_gpiod_flags: parsed 'qcom,gpio-proxy-unvote' property of node '/soc/qcom,mss@4080000[0]' - status (0)
762
[    0.529796] of_get_named_gpiod_flags: parsed 'qcom,gpio-err-fatal' property of node '/soc/qcom,mss@4080000[0]' - status (0)
763
[    0.529815] of_get_named_gpiod_flags: parsed 'qcom,gpio-err-ready' property of node '/soc/qcom,mss@4080000[0]' - status (0)
764
[    0.529828] of_get_named_gpiod_flags: parsed 'qcom,gpio-stop-ack' property of node '/soc/qcom,mss@4080000[0]' - status (0)
765
[    0.529843] of_get_named_gpiod_flags: parsed 'qcom,gpio-force-stop' property of node '/soc/qcom,mss@4080000[0]' - status (0)
766
[    0.529858] of_get_named_gpiod_flags: parsed 'qcom,gpio-shutdown-ack' property of node '/soc/qcom,mss@4080000[0]' - status (0)
767
[    0.532139] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
768
[    0.533732] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/qcom,smp2pgpio_test_smp2p_15_in[0]' - status (0)
769
[    0.533796] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/qcom,smp2pgpio_test_smp2p_15_out[0]' - status (0)
770
[    0.533847] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/qcom,smp2pgpio_test_smp2p_1_in[0]' - status (0)
771
[    0.533897] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/qcom,smp2pgpio_test_smp2p_1_out[0]' - status (0)
772
[    0.612246] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
773
[    0.612570] ubi0: attaching mtd15
774
[    1.300899] ubi0: scanning is finished
775
[    1.307269] ubi0: attached mtd15 (name "system", size 196 MiB)
776
[    1.307283] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
777
[    1.307292] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
778
[    1.307301] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192
779
[    1.307310] ubi0: good PEBs: 785, bad PEBs: 0, corrupted PEBs: 0
780
[    1.307318] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
781
[    1.307328] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1361646696
782
[    1.307337] ubi0: available PEBs: 0, total reserved PEBs: 785, PEBs reserved for bad PEB handling: 40
783
[    1.307361] ubi1: attaching mtd9
784
[    1.320105] ubi0: background thread "ubi_bgt0d" started, PID 124
785
[    1.587794] ubi1: scanning is finished
786
[    1.593614] ubi1: attached mtd9 (name "modem", size 80 MiB)
787
[    1.593628] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
788
[    1.593637] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
789
[    1.593646] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192
790
[    1.593654] ubi1: good PEBs: 321, bad PEBs: 0, corrupted PEBs: 0
791
[    1.593663] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
792
[    1.593673] ubi1: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 162890607
793
[    1.593682] ubi1: available PEBs: 0, total reserved PEBs: 321, PEBs reserved for bad PEB handling: 40
794
[    1.593720] RNDIS_IPA module is loaded.
795
[    1.594361] file system registered
796
[    1.594449] mbim_init: initialize 1 instances
797
[    1.594533] mbim_init: Initialized 1 ports
798
[    1.594752] ubi1: background thread "ubi_bgt1d" started, PID 125
799
[    1.596377] rndis_qc_init: initialize rndis QC instance
800
[    1.596673] Number of LUNs=8
801
[    1.596687] Mass Storage Function, version: 2009/09/11
802
[    1.596699] LUN: removable file: (no medium)
803
[    1.596719] Number of LUNs=1
804
[    1.596793] LUN: removable file: (no medium)
805
[    1.596802] Number of LUNs=1
806
[    1.597085] android_usb gadget: android_usb ready
807
[    1.597099] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
808
[    1.597146] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
809
[    1.597160] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
810
[    1.597783] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
811
[    1.598245] qcom,qpnp-rtc qpnp-rtc-cf30ea00: setting system clock to 1970-01-01 00:01:17 UTC (77)
812
[    1.599384] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
813
[    1.601087] parse_legacy_cluster_params(): Ignoring cluster params
814
[    1.601103] ------------[ cut here ]------------
815
[    1.601121] WARNING: CPU: 0 PID: 1 at /home/becking/9X07_V/EC25_V/MDM9x07/MCU_R02/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607-perf/kernel-source/drivers/cpuidle/lpm-levels-of.c:739 parse_cluster+0xb48/0xcac()
816
[    1.601129] Modules linked in:
817
[    1.601143] CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.20 #1
818
[    1.601171] [<c001312c>] (unwind_backtrace) from [<c0011380>] (show_stack+0x10/0x14)
819
[    1.601188] [<c0011380>] (show_stack) from [<c001c1e0>] (warn_slowpath_common+0x68/0x88)
820
[    1.601202] [<c001c1e0>] (warn_slowpath_common) from [<c001c290>] (warn_slowpath_null+0x18/0x20)
821
[    1.601216] [<c001c290>] (warn_slowpath_null) from [<c03b2c30>] (parse_cluster+0xb48/0xcac)
822
[    1.601231] [<c03b2c30>] (parse_cluster) from [<c03b0250>] (lpm_probe+0xc/0x1ec)
823
[    1.601246] [<c03b0250>] (lpm_probe) from [<c025b104>] (platform_drv_probe+0x30/0x7c)
824
[    1.601263] [<c025b104>] (platform_drv_probe) from [<c0259950>] (driver_probe_device+0xb8/0x1dc)
825
[    1.601278] [<c0259950>] (driver_probe_device) from [<c0259b20>] (__driver_attach+0x68/0x8c)
826
[    1.601293] [<c0259b20>] (__driver_attach) from [<c025821c>] (bus_for_each_dev+0x6c/0x90)
827
[    1.601308] [<c025821c>] (bus_for_each_dev) from [<c02591a0>] (bus_add_driver+0xe0/0x1c8)
828
[    1.601322] [<c02591a0>] (bus_add_driver) from [<c025a350>] (driver_register+0x9c/0xe0)
829
[    1.601338] [<c025a350>] (driver_register) from [<c0a46b28>] (lpm_levels_module_init+0x14/0x38)
830
[    1.601353] [<c0a46b28>] (lpm_levels_module_init) from [<c00088f0>] (do_one_initcall+0xf8/0x1a0)
831
[    1.601368] [<c00088f0>] (do_one_initcall) from [<c0a20d30>] (kernel_init_freeable+0xf0/0x1b0)
832
[    1.601384] [<c0a20d30>] (kernel_init_freeable) from [<c06d87b8>] (kernel_init+0x10/0x1dc)
833
[    1.601399] [<c06d87b8>] (kernel_init) from [<c000dce0>] (ret_from_fork+0x14/0x34)
834
[    1.601408] ---[ end trace b1a68bbeb03c7033 ]---
835
[    1.601438] WARNING: CPU: 0 PID: 1 at /home/becking/9X07_V/EC25_V/MDM9x07/MCU_R02/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607-perf/kernel-source/drivers/cpuidle/lpm-levels-of.c:739 parse_cluster+0xb48/0xcac()
836
[    1.601446] Modules linked in:
837
[    1.601457] CPU: 0 PID: 1 Comm: swapper Tainted: G        W      3.18.20 #1
838
[    1.601472] [<c001312c>] (unwind_backtrace) from [<c0011380>] (show_stack+0x10/0x14)
839
[    1.601486] [<c0011380>] (show_stack) from [<c001c1e0>] (warn_slowpath_common+0x68/0x88)
840
[    1.601499] [<c001c1e0>] (warn_slowpath_common) from [<c001c290>] (warn_slowpath_null+0x18/0x20)
841
[    1.601513] [<c001c290>] (warn_slowpath_null) from [<c03b2c30>] (parse_cluster+0xb48/0xcac)
842
[    1.601526] [<c03b2c30>] (parse_cluster) from [<c03b0250>] (lpm_probe+0xc/0x1ec)
843
[    1.601539] [<c03b0250>] (lpm_probe) from [<c025b104>] (platform_drv_probe+0x30/0x7c)
844
[    1.601553] [<c025b104>] (platform_drv_probe) from [<c0259950>] (driver_probe_device+0xb8/0x1dc)
845
[    1.601568] [<c0259950>] (driver_probe_device) from [<c0259b20>] (__driver_attach+0x68/0x8c)
846
[    1.601582] [<c0259b20>] (__driver_attach) from [<c025821c>] (bus_for_each_dev+0x6c/0x90)
847
[    1.601596] [<c025821c>] (bus_for_each_dev) from [<c02591a0>] (bus_add_driver+0xe0/0x1c8)
848
[    1.601610] [<c02591a0>] (bus_add_driver) from [<c025a350>] (driver_register+0x9c/0xe0)
849
[    1.601625] [<c025a350>] (driver_register) from [<c0a46b28>] (lpm_levels_module_init+0x14/0x38)
850
[    1.601639] [<c0a46b28>] (lpm_levels_module_init) from [<c00088f0>] (do_one_initcall+0xf8/0x1a0)
851
[    1.601652] [<c00088f0>] (do_one_initcall) from [<c0a20d30>] (kernel_init_freeable+0xf0/0x1b0)
852
[    1.601666] [<c0a20d30>] (kernel_init_freeable) from [<c06d87b8>] (kernel_init+0x10/0x1dc)
853
[    1.601679] [<c06d87b8>] (kernel_init) from [<c000dce0>] (ret_from_fork+0x14/0x34)
854
[    1.601687] ---[ end trace b1a68bbeb03c7034 ]---
855
[    1.601704] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
856
[    1.602659] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
857
[    1.604308] qcom,cc-debug-mdm9607 1800000.qcom,debug: Registered Debug Mux successfully
858
[    1.604900] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
859
[    1.605337] emac_lan_vreg: disabling
860
[    1.605351] rome_vreg: disabling
861
[    1.605359] sdcard_ext_vreg: disabling
862
[    1.605390] mem_acc_corner: disabling
863
[    1.605407] clock_late_init: Removing enables held for handed-off clocks
864
[    1.606971] ALSA device list:
865
[    1.606982]   No soundcards found.
866
[    1.607078] Warning: unable to open an initial console.
867
[    1.620132] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 131
868
[    1.658147] UBIFS (ubi0:0): recovery needed
869
[    1.830135] UBIFS (ubi0:0): recovery completed
870
[    1.830215] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
871
[    1.830227] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
872
[    1.830238] UBIFS (ubi0:0): FS size: 63741952 bytes (60 MiB, 251 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
873
[    1.830247] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
874
[    1.830260] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID F2A052C8-E1B3-4486-B70C-FF316E333D48, small LPT model
875
[    1.832661] VFS: Mounted root (ubifs filesystem) on device 0:12.
876
[    1.833080] Freeing unused kernel memory: 288K (c0a20000 - c0a68000)
877
[    1.833094] @Ramos<A1><A1>Kernel command line: noinitrd  rw console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1  earlycon=msm_hsl_uart,0x78b3000  androidboot.serialno=313a01a5 androidboot.baseband=msm rootfstype=ubifs rootflags=bulk_read root=ubi0:rootfs ubi.mtd=15 ubi.mtd=9
878
[    1.936329] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "modem", R/O mode
879
[    1.936347] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
880
[    1.936359] UBIFS (ubi1:0): FS size: 67805184 bytes (64 MiB, 267 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
881
[    1.936368] UBIFS (ubi1:0): reserved for root: 0 bytes (0 KiB)
882
[    1.936380] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID C3F2EA6E-08D9-4423-9FED-EC943F9D938C, small LPT model
883
[    1.938752] quectel_mount_success 
884
[    1.938770] subsys-restart: __subsystem_get(): Changing subsys fw_name to modem
885
[    1.953526] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x82a00000 to 0x87a00000
886
[    1.980423] pil-q6v5-mss 4080000.qcom,mss: Debug policy not present - msadp. Continue.
887
[    1.981161] pil-q6v5-mss 4080000.qcom,mss: Loading MBA and DP (if present) from 0x8f900000 to 0x8fa00000
888
[    2.028098] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
889
[    6.224857] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
890
[    6.324991] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
891
[    6.326369] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
892
[    6.326423] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
893
[    6.326657] M-Notify: General: 7
894
[    6.326697] subsys-restart: subsys_set_state(): [cf044000]: subsys_set_state 1
895
[    6.326714] @Ramos kernel_init try_to_run_init_process entry !!!!
896
[    6.326714] 
897
[    6.343697] @Ramos kernel_init try_to_run_init_process EXIT 11111
898
[    6.343697] 
899
[    6.529466] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
900
[    6.530777] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
901
[    6.530964] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, c0beb5e8
902
[    6.532821] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
903
[    6.548058] apr_tal:Modem Is Up
904
[    6.548921] mdm9607-asoc-tomtom soc:sound: ASoC: CODEC DAI a not registered
905
[    7.260205] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 185
906
[    7.260873] [Max][USB_DEF_ID_CHECK] quec_usb_pid exists!
907
[    7.283278] [Max][USB_DEF_ID_CHECK] quec_usb_vid exists!
908
[    7.283392] [Max][USB_DEF_ID_CHECK] USB ID in fs: pid is 0125 && pid is 2C7C
909
[    7.334697] enable_store: android_usb: already disabled
910
[    7.344229] UBIFS (ubi0:1): recovery needed
911
[    7.501159] read descriptors
912
[    7.501182] read strings
913
[    7.684348] UBIFS (ubi0:1): recovery completed
914
[    7.684432] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "usrfs"
915
[    7.684444] UBIFS (ubi0:1): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
916
[    7.684455] UBIFS (ubi0:1): FS size: 61456384 bytes (58 MiB, 242 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
917
[    7.684464] UBIFS (ubi0:1): reserved for root: 0 bytes (0 KiB)
918
[    7.684477] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID A146802F-27F5-47D6-9E76-DE8EB380B587, small LPT model
919
[    8.485649] QCMAP:start
920
[    8.500590] QTI:start
921
[    8.979570] USB QCMAP NL IOCTL Snd GETNEIGH Succ
922
[    8.990684] enter rt5616_modinit
923
[    8.990759] enter rt5616_i2c_probe
924
[    9.055270] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE1_DL --> VoiceMMode1 --> SEC_MI2S_RX_Voice Mixer
925
[    9.055289] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE1_DL -> VoiceMMode1 -> SEC_MI2S_RX_Voice Mixer
926
[    9.055324] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE2_DL --> VoiceMMode2 --> SEC_MI2S_RX_Voice Mixer
927
[    9.055335] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE2_DL -> VoiceMMode2 -> SEC_MI2S_RX_Voice Mixer
928
[    9.082276] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
929
[    9.082296] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
930
[    9.083284] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY_MI2S_TX
931
[    9.083296] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE_IN -> direct -> SENARY_MI2S_TX
932
[    9.094961] ------------[ cut here ]------------
933
[    9.094995] WARNING: CPU: 0 PID: 410 at /home/becking/9X07_V/EC25_V/MDM9x07/MCU_R02/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607-perf/kernel-source/net/netfilter/nf_queue.c:35 nf_register_queue_handler+0x28/0x38()
934
[    9.095004] Modules linked in: snd_soc_alc5616
935
[    9.095021] CPU: 0 PID: 410 Comm: sh Tainted: G        W      3.18.20 #1
936
[    9.095048] [<c001312c>] (unwind_backtrace) from [<c0011380>] (show_stack+0x10/0x14)
937
[    9.095065] [<c0011380>] (show_stack) from [<c001c1e0>] (warn_slowpath_common+0x68/0x88)
938
[    9.095079] [<c001c1e0>] (warn_slowpath_common) from [<c001c290>] (warn_slowpath_null+0x18/0x20)
939
[    9.095094] [<c001c290>] (warn_slowpath_null) from [<c057ebb8>] (nf_register_queue_handler+0x28/0x38)
940
[    9.095110] [<c057ebb8>] (nf_register_queue_handler) from [<c0598e30>] (proc_sip_segment+0x38/0x54)
941
[    9.095126] [<c0598e30>] (proc_sip_segment) from [<c0120930>] (proc_sys_call_handler+0x98/0xb4)
942
[    9.095142] [<c0120930>] (proc_sys_call_handler) from [<c012095c>] (proc_sys_write+0x10/0x18)
943
[    9.095156] [<c012095c>] (proc_sys_write) from [<c00d4f48>] (vfs_write+0xb8/0x170)
944
[    9.095168] [<c00d4f48>] (vfs_write) from [<c00d53b8>] (SyS_write+0x40/0x80)
945
[    9.095182] [<c00d53b8>] (SyS_write) from [<c000dc40>] (ret_fast_syscall+0x0/0x38)
946
[    9.095191] ---[ end trace b1a68bbeb03c7035 ]---
947
[    9.171020] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM_0_RX AANC MUX has no paths
948
[    9.188056] enter rt5616_probe
949
[    9.188079] alc5616-codec 2-001b: func: rt5616_reset, reset codec 
950
[    9.188201] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x7 (ok)
951
[    9.188418] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
952
[    9.190357] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000010
953
[    9.210555] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000010
954
[    9.210836] alc5616-codec 2-001b: func: rt5616_reg_init, init codec 
955
[    9.210929] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
956
[    9.211045] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
957
[    9.211155] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
958
[    9.211287] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
959
[    9.211415] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
960
[    9.211538] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
961
[    9.211661] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
962
[    9.211781] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
963
[    9.211902] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
964
[    9.212021] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
965
[    9.212141] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
966
[    9.212261] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
967
[    9.212380] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
968
[    9.212505] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx)
969
 bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
970
[    9.212625] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
971
[    9.212745] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
972
[    9.212863] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
973
[    9.212983] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
974
[    9.213128] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
975
[    9.213267] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
976
[    9.213412] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
977
[    9.213552] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
978
[    9.213693] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
979
[    9.213836] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
980
[    9.213979] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
981
[    9.214120] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
982
[    9.214263] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
983
[    9.214406] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
984
[    9.214546] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
985
[    9.214688] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
986
[    9.214828] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
987
[    9.214967] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
988
[    9.215108] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
989
[    9.215248] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
990
[    9.215391] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
991
[    9.215532] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
992
[    9.215676] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
993
[    9.215816] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
994
[    9.215958] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
995
[    9.216099] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
996
[    9.216238] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
997
[    9.216378] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
998
[    9.216534] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
999
[    9.216677] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
1000
[    9.219293] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: no sink widget found for STUB_DTMF_TX
1001
[    9.219314] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: Failed to add route DTMF TX -> direct -> STUB_DTMF_TX
1002
[    9.219372] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: no sink widget found for STUB_HOST_RX_CAPTURE_TX
1003
[    9.219387] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: Failed to add route CS-VOICE HOST RX CAPTURE -> direct -> STUB_HOST_RX_CAPTURE_TX
1004
[    9.219436] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: no source widget found for STUB_HOST_RX_PLAYBACK_RX
1005
[    9.219448] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: Failed to add route STUB_HOST_RX_PLAYBACK_RX -> direct -> CS-VOICE HOST RX PLAYBACK
1006
[    9.219497] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: no sink widget found for STUB_HOST_TX_CAPTURE_TX
1007
[    9.219510] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: Failed to add route CS-VOICE HOST TX CAPTURE -> direct -> STUB_HOST_TX_CAPTURE_TX
1008
[    9.219556] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: no source widget found for STUB_HOST_TX_PLAYBACK_RX
1009
[    9.219569] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: Failed to add route STUB_HOST_TX_PLAYBACK_RX -> direct -> CS-VOICE HOST TX PLAYBACK
1010
[    9.244443] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
1011
[    9.247326] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx)
1012
 bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
1013
[    9.247449] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x011363c8 OPER:0x00000090
1014
[    9.247555] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0113e3c8 OPER:0x00000090
1015
[    9.247665] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
1016
[    9.247771] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
1017
[    9.247874] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
1018
[    9.248009] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
1019
[    9.248146] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091343c8 OPER:0x00000090
1020
[    9.248284] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x091383c8 OPER:0x00000090
1021
[    9.248454] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1b MSTR_STS:0x0d1300c8 OPER:0x00000090
1022
[    9.822921] subsys-restart: state_show(): [cac93180]: state ONLINE
1023
[    9.832372] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
1024
[    9.865276] embms:start/load
1025
[   10.068967] msm_thermal:set_enabled enabled = 0
1026
[   10.185132] msm_otg 78d9000.usb: Avail curr from USB = 100
1027
[   10.185477] android_work: android_work: did not send uevent (0 0   (null))
1028
[   10.252490] subsys-restart: quec_state_show(): [cad20b00]: line: 216, quectel_restart_modem: 0
1029
[   10.255758] android_work: android_work: sent uevent USB_STATE=CONNECTED
1030
[   10.260697] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1031
[   10.359722] android_work: android_work: sent uevent USB_STATE=CONNECTED
1032
[   10.371389] android_usb gadget: high-speed config #1: 86000c8.android_usb
1033
[   10.371440] diag: USB channel diag connected
1034
[   10.371652] msm_otg 78d9000.usb: Avail curr from USB = 500
1035
[   10.372047] gbam_connect_work: gbam_connect_work: Bam channel is not ready
1036
[   10.432191] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1037
[   10.475471] sps:BAM 0x04044000 is registered.
1038
[   10.475673] sps:BAM 0x04044000 (va:0xd18e0000) enabled: ver:0x27, number of pipes:6
1039
[   11.086196] random: lighttpd urandom read with 39 bits of entropy available
1040
[   11.382939] QCMAP:Start DHCP server
1041
[   11.420189] [Max][SMEM][qsmem_unlocked_ioctl][200] OK! QSMEM_IOCTL_SET_RDY_STATE: successful to copy data to user[qsmem_ready_state=1,pre_state=0]
1042
[   11.420220] [Max][SMEM] find SMEM_ID_VENDOR1 OK when qsmem ready notification has come
1043
[   11.420266] [Max][SMEM] qsmem_write over! res=0
1044
[   11.420283] [Max][SMEM] qsmem_read wait - begin
1045
[   11.614159] QCMAP:DHCP server started
1046
[   11.622946] QCMAP:DHCP server started
1047
[   11.843212] QCMAP:Init Complete
1048
[   11.920129] [Max][SMEM] [qsmem_poll_timer_cb:110] Status=[A],AliveTime=0,condition=0
1049
[   11.926788] eMBMs Tunneling Module:start
1050
[   12.347910] Shortcut_FE_IPV4:start/load
1051
[   12.394494] Shortcut_FE_IPV6:start/load
1052
[   12.398979] gser_suspend: Un-supported transport: TTY
1053
[   12.399035] msm_otg 78d9000.usb: Avail curr from USB = 2
1054
[   12.399064] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
1055
[   12.399130] android_work: android_work: sent uevent USB_STATE=SUSPENDED
1056
[   12.420137] [Max][SMEM] [qsmem_poll_timer_cb:110] Status=[M],AliveTime=1,condition=0
1057
[   12.420171] [Max][SMEM] qsmem_poll_timer_cb:121 Modem Msg received.
1058
[   12.420243] [Max][SMEM] qsmem_read wait end and del time![r=0]
1059
[   12.457623] [Max][USB_DEF_ID_CHECK] get usb id from modem: pid=0x125, vid=0x2C7C
1060
[   12.466277] [Max][SMEM] qsmem_write over! res=0
1061
[   12.466302] [Max][SMEM] qsmem_read wait - begin
1062
[   12.467023] Shortcut_FE_CM:start/load
1063
[   12.701102] [Max][USB_DEF_ID_CHECK] cur usb id: pid is 0125,vid is 2C7C
1064
[   12.701212] [Max][USB_DEF_ID_CHECK] test usb id: pid's 0125,vid is 2C7C
1065
[   12.701307] [Max][USB_DEF_ID_CHECK] B_USB_ORG=[lrwxrwxrwx    1 root     root            27 Aug 27  2016 /sbin/usb/boot_hsusb_composition -> /sbin/usb/compositions/9025]
1066
[   12.701528] [Max][USB_DEF_ID_CHECK] USB ID is still defined by Quectel! So check it...
1067
[   12.701703] [Max][USB_DEF_ID_CHECK] test usb PID is the same with cur usb id
1068
[   12.701770] [Max][USB_DEF_ID_CHECK] test usb VID is the same with cur usb id
1069
[   12.746250] afe_debug_open: debug intf afe_loop_gain
1070
[   12.746354] afe_debug_write: afe_loop_gain 4109 2
1071
[   12.960134] [Max][SMEM] [qsmem_poll_timer_cb:110] Status=[A],AliveTime=0,condition=0
1072
[   13.006333] subsys-restart: state_show(): [ca828580]: state ONLINE
1073
[   13.188159] subsys-restart: state_show(): [cae5a100]: state ONLINE
1074
[   13.200330] QTI_PPP:start
1075
[   13.460125] [Max][SMEM] [qsmem_poll_timer_cb:110] Status=[M],AliveTime=1,condition=0
1076
[   13.460156] [Max][SMEM] qsmem_poll_timer_cb:121 Modem Msg received.
1077
[   13.460222] [Max][SMEM] qsmem_read wait end and del time![r=0]
1078
[   13.542972] [Max][SMEM] QUECTEL_MODEM_SMEM_INIT_CMP has recved 1 time
1079
[   13.586088] mbimd: Proc start
1080
[   13.624645] mbim_open: Open mbim driver
1081
[   13.624660] mbim_open: Lock mbim_dev->open_excl for open
1082
[   13.624668] mbim_open: USB cable not connected
1083
[   13.624675] mbim_open: Exit, mbim file opened
1084
[   13.830631] [Max][DTR][(null):-1066321201] smd_open_ret = 193
1085
[   13.830703] [Max][DTR]  [dtr_notify:165] event=2
1086
[   13.830712] [Max][DTR] DTR SMD EVENT OPEN
1087
[   13.830765] [Max][DTR]  [dtr_notify:165] event=4
1088
[   13.830796] [Max][DTR] dtr_devp->flag=-1,value = 1,cbits_to_modem = 0,~cbits_to_modem = -1 func = send_data_to_smd
1089
[   14.045105] msm_otg 78d9000.usb: USB in low power mode
1090
[   18.613861] USB QCMAP NL IOCTL Snd GETNEIGH Succ
1091
[   18.704247] USB QCMAP NL IOCTL Snd GETNEIGH Succ
1092
[   33.530408] random: nonblocking pool is initialized
1093
[   43.580662] ------------[ cut here ]------------
1094
[   43.580730] WARNING: CPU: 0 PID: 0 at /home/becking/9X07_V/EC25_V/MDM9x07/MCU_R02/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607-perf/kernel-source/net/core/dev.c:3413 netif_rx_internal+0x4c/0x248()
1095
[   43.580745] Cloned packet from dev bridge0
1096
[   43.580760] Modules linked in: shortcut_fe_cm(O) shortcut_fe_ipv6(O) shortcut_fe(O) embms_kernel(O) snd_soc_alc5616
1097
[   43.580805] CPU: 0 PID: 0 Comm: swapper Tainted: G        W  O   3.18.20 #1
1098
[   43.580856] [<c001312c>] (unwind_backtrace) from [<c0011380>] (show_stack+0x10/0x14)
1099
[   43.580886] [<c0011380>] (show_stack) from [<c001c1e0>] (warn_slowpath_common+0x68/0x88)
1100
[   43.580910] [<c001c1e0>] (warn_slowpath_common) from [<c001c22c>] (warn_slowpath_fmt+0x2c/0x3c)
1101
[   43.580935] [<c001c22c>] (warn_slowpath_fmt) from [<c0558f80>] (netif_rx_internal+0x4c/0x248)
1102
[   43.580960] [<c0558f80>] (netif_rx_internal) from [<c05592c0>] (netif_rx_ni+0x8c/0xf4)
1103
[   43.580982] [<c05592c0>] (netif_rx_ni) from [<c05593e0>] (dev_loopback_xmit+0xb8/0xc4)
1104
[   43.581009] [<c05593e0>] (dev_loopback_xmit) from [<c060d6bc>] (ip6_finish_output2+0xe0/0x4dc)
1105
[   43.581039] [<c060d6bc>] (ip6_finish_output2) from [<c062bcfc>] (igmp6_send+0x30c/0x51c)
1106
[   43.581067] [<c062bcfc>] (igmp6_send) from [<c062d35c>] (igmp6_timer_handler+0x2c/0x6c)
1107
[   43.581097] [<c062d35c>] (igmp6_timer_handler) from [<c0052010>] (call_timer_fn+0x84/0x17c)
1108
[   43.581124] [<c0052010>] (call_timer_fn) from [<c0052718>] (run_timer_softirq+0x25c/0x2a8)
1109
[   43.581150] [<c0052718>] (run_timer_softirq) from [<c001ec08>] (__do_softirq+0x124/0x2e4)
1110
[   43.581175] [<c001ec08>] (__do_softirq) from [<c001f038>] (irq_exit+0x80/0xdc)
1111
[   43.581201] [<c001f038>] (irq_exit) from [<c00476bc>] (__handle_domain_irq+0x78/0x90)
1112
[   43.581226] [<c00476bc>] (__handle_domain_irq) from [<c00086cc>] (gic_handle_irq+0x38/0x50)
1113
[   43.581250] [<c00086cc>] (gic_handle_irq) from [<c0011d40>] (__irq_svc+0x40/0x74)
1114
[   43.581266] Exception stack(0xc0a69ef0 to 0xc0a69f38)
1115
[   43.581285] 9ee0:                                     00000139 00000000 00000866 000003e8
1116
[   43.581306] 9f00: 00000001 c0a68038 8d4fdf3b 83126e97 00000001 c0add118 2595a0f5 0000000a
1117
[   43.581325] 9f20: 00000000 c0a69f38 c00583dc c03b18fc 00000013 ffffffff
1118
[   43.581353] [<c0011d40>] (__irq_svc) from [<c03b18fc>] (lpm_cpuidle_enter+0x3f4/0x420)
1119
[   43.581379] [<c03b18fc>] (lpm_cpuidle_enter) from [<c03add68>] (cpuidle_enter_state+0xb8/0x254)
1120
[   43.581408] [<c03add68>] (cpuidle_enter_state) from [<c003f434>] (cpu_startup_entry+0x1d8/0x2ac)
1121
[   43.581439] [<c003f434>] (cpu_startup_entry) from [<c0a20bd4>] (start_kernel+0x32c/0x398)
1122
[   43.581456] ---[ end trace b1a68bbeb03c7036 ]---
1123
</pre>
1124 2 laforge
1125
h2. iptables
1126
1127
<pre>
1128
root@mdm9607-perf:/sbin# iptables --version
1129
iptables v1.4.12.1
1130
</pre>
1131
1132
h2. reboot
1133
1134
<pre>
1135
root@mdm9607-perf:/sbin# cat ./reboot-recovery
1136
#! /bin/sh
1137
1138
echo 2 > /etc/reboot-cookie
1139
reboot
1140
</pre>
1141
1142
<pre>
1143
root@mdm9607-perf:/sbin# cat ./reboot-bootloader
1144
#! /bin/sh
1145
1146
echo 1 > /etc/reboot-cookie
1147
reboot
1148
</pre>
1149 3 laforge
1150
h2. Modem Firmware Images
1151
1152
<pre>
1153
root@mdm9607-perf:/firmware# find .
1154
.
1155
./image
1156
./image/qwlan.bin
1157
./image/mba.b00
1158
./image/mba.b01
1159
./image/mba.b02
1160
./image/mba.b03
1161
./image/mba.b04
1162
./image/mba.b05
1163
./image/mba.mbn
1164
./image/mba.mdt
1165
./image/tfbtnv11.bin
1166
./image/otp.bin
1167
./image/bdwlan.bin
1168
./image/tfbtfw11.tlv
1169
./image/modem.b00
1170
./image/modem.b01
1171
./image/modem.b02
1172
./image/modem.b03
1173
./image/modem.b05
1174
./image/modem.b06
1175
./image/modem.b07
1176
./image/modem.b08
1177
./image/modem.b09
1178
./image/modem.b10
1179
./image/modem.b11
1180
./image/modem.b12
1181
./image/modem.b13
1182
./image/modem.b14
1183
./image/modem.b15
1184
./image/modem.b16
1185
./image/modem.b19
1186
./image/modem.b20
1187
./image/modem.b21
1188
./image/modem.b22
1189
./image/modem.b23
1190
./image/modem.b24
1191
./image/modem.mdt
1192
./image/athwlan.bin
1193
./image/utf.bin
1194
./image/utf30.bin
1195
./image/fakeboar.bin
1196
./image/qwlan30.bin
1197
./image/qca61x4.bin
1198
</pre>
1199 4 laforge
1200
h2. USB debugger??
1201
1202
<pre>
1203
root@mdm9607-perf:/sbin/usb/debuger# cat debugFiles 
1204
_______________________________________
1205
1       msm_otg
1206
_______________________________________
1207
2       ci13xxx_udc
1208
_______________________________________
1209
3       ci13xxx_msm
1210
_______________________________________
1211
4       f_gps
1212
_______________________________________
1213
5       f_mbim
1214
_______________________________________
1215
6       f_qc_ecm
1216
_______________________________________
1217
7       f_qc_rndis
1218
_______________________________________
1219
8       f_rmnet
1220
_______________________________________
1221
9       f_tcm
1222
_______________________________________
1223
10      u_bam
1224
_______________________________________
1225
11      u_bam_data
1226
_______________________________________
1227
12      usb_bam
1228
_______________________________________
1229
13      android
1230
_______________________________________
1231
14      composite
1232
_______________________________________
1233
15      ehci-msm-hsic
1234
_______________________________________
1235
16      u_qc_ether
1236
_______________________________________
1237
root@mdm9607-perf:/sbin/usb/debuger# cat help 
1238
usb_debug:
1239
        Bash script for enable or disable debug message from usb related files.
1240
Usage:
1241
        usb_debug [status]
1242
        usb_debug [flag] [Operation] [As Default?] [Arg....]
1243
status:
1244
        show list of the active files (enable debug messaged)
1245
flag:
1246
        -l,     read files name from argument list. here Arg is file name (without suffix ".c")
1247
        -f,     read filenames from Arg, here Arg is path to a file that contain list of filenames
1248
                (each name without suffix ".c")
1249
        all,    enable or disable debug messages from all the files in debugFiles
1250
                (the files that the script support)
1251
Operation:
1252
        on,      enable debug message
1253
        off,     disable debug message
1254
As Default:
1255
        y/n     enable debug messages from these files also in next power cycle?
1256
                - set these files as default debug configuration?
1257
1258
*** important notes ***
1259
1) You can always use the manual interface. Just usb_debug with no param.
1260
2) Each default setting is overrides the previous one.
1261
3) To insert or delete files, you have to edit debugFiles manually,
1262
   add a new line with number(Fid) and file name (without suffix ".c").
1263
4) debugFiles path: on target   usr/bin/usb/debuger/debugFiles
1264
                    GIT         system/core/usb/debuger/debugFiles
1265
5)TIP: to set the files that active now as defult use: usb_debug -f on y usr/bin/usb/debuger/statusFile
1266
</pre>
1267 5 laforge
1268 6 laforge
h2. Partitions
1269 5 laforge
1270
<pre>
1271
root@mdm9607-perf:/proc# cat partitions 
1272
major minor  #blocks  name
1273
1274
  31        0       2560 mtdblock0
1275
  31        1       2560 mtdblock1
1276
  31        2      22528 mtdblock2
1277
  31        3      10240 mtdblock3
1278
  31        4       3072 mtdblock4
1279
  31        5       3072 mtdblock5
1280
  31        6       3072 mtdblock6
1281
  31        7      10240 mtdblock7
1282
  31        8      16896 mtdblock8
1283
  31        9      82176 mtdblock9
1284
  31       10       3072 mtdblock10
1285
  31       11      10240 mtdblock11
1286
  31       12      20480 mtdblock12
1287
  31       13      30720 mtdblock13
1288
  31       14     102400 mtdblock14
1289
  31       15     200960 mtdblock15
1290
</pre>
Add picture from clipboard (Maximum size: 48.8 MB)