Project

General

Profile

Sdrangelove » History » Revision 11

Revision 10 (horiz0n, 02/19/2016 10:51 PM) → Revision 11/21 (horiz0n, 02/19/2016 10:51 PM)

[[PageOutline]] 
 = Project sdrangelove = 

 TODO 

 [[Image(gsm.jpg, 600px)]] 800px)]] 
 [[Image(lte.jpg, 600px)]] 800px)]] 

 == Supported Hardware == 

 While primarily being developed for the OsmoSDR hardware, sdrangelove as well supports: 

  * [http://tetra.osmocom.org/trac/wiki/Funcube_Dongle FunCube Dongle] through libgnuradio-fcd 
  * [http://www.funcubedongle.com/?page_id=1073 FUNcube Dongle Pro+] through [https://github.com/dl1ksv/gr-fcdproplus gr-fcdproplus] 
  * [http://sdr.osmocom.org/trac/ sysmocom OsmoSDR] Devices through [http://cgit.osmocom.org/osmo-sdr/ libosmosdr] 
  * [http://nuand.com/ Nuand LLC bladeRF] through [https://github.com/Nuand/bladeRF libbladeRF library] 
  * [http://greatscottgadgets.com/hackrf/ Great Scott Gadgets HackRF] through [https://github.com/mossmann/hackrf libhackrf] 
  * [http://www.ettus.com/product Ettus USRP] Devices through [http://files.ettus.com/uhd_docs/manual/html/build.html Ettus UHD library] 
  * [http://umtrx.org Fairwaves UmTRX] through [https://github.com/fairwaves/UHD-Fairwaves Fairwaves' fork of Ettus' UHD library] 
  * RTL2832U based DVB-T dongles through [http://sdr.osmocom.org/trac/wiki/rtl-sdr librtlsdr] 
  * RTL-TCP spectrum server (see librtlsdr project) 
  * MSi2500 based DVB-T dongles through [http://cgit.osmocom.org/libmirisdr/ libmirisdr] 
  * gnuradio .cfile input through libgnuradio-blocks 

 == Software == 

 The sdrangelove code can be checked out with: 
 {{{ 
 git clone git://git.osmocom.org/sdrangelove.git 
 }}} 

 It can also be browsed on http://cgit.osmocom.org/cgit/sdrangelove/ 

 If you are going to "fork it on github" and enhance it, don't leave it bitrot there - '''contribute back''' and submit your patches to: osmocom-sdr at lists.osmocom.org. The amount (and quality) of contribution from the commmunity '''will have a direct impact''' on the availability of new features. 

 === Mailing List === 

 We discuss sdrangelove on the following mailing list: osmocom-sdr at lists.osmocom.org. 

 You can subscribe and/or unsubscribe via the following link: [http://lists.osmocom.org/mailman/listinfo/osmocom-sdr] 

 === Building the software === 

 ==== sdrangelove ==== 

 '''You have to install development packages for libusb1.0''' to build the software. 

 Sdrangelove comes with built-in support for OsmoSDR and rtl-sdr. Additional hardware support is available through a gr-osmosdr plugin which will be built automaticaly if gr-osmosdr has been installed (see below for guidance). 

 Building with cmake: 
 {{{ 
 cd sdrangelove/ 
 mkdir build 
 cd build 
 cmake ../ 
 make 
 }}} 

 Running it: 

 {{{ 
 cd sdrangelove 
 cd build/ 
 ./sdrangelove 
 }}} 

 ==== Gnuradio Source ==== 

 '''The Gnu Radio source requires a recent gnuradio (>= v3.7) to be installed.''' 

 The source supports direct device operation as well as a tcp client mode when using the rtl_tcp utility as a spectrum server. 

 Please note: prior pulling a new version from git and compiling it, please do a "make uninstall" from build directory first to properly remove the previous version. 

 Please note: you always should build & '''install the latest version of the dependencies''' before trying to build the gr source. The build system of gr-osmosdr will recognize them and enable specific source/sink components thereafter. 

 Building with cmake (as described in the [https://sdr.osmocom.org/trac/wiki/GrOsmoSDR gr-osmosdr wiki page]): 

 {{{ 
 git clone git://git.osmocom.org/gr-osmosdr 
 cd gr-osmosdr/ 
 }}} 

 You can build a standalone (no gnuradio required) version for gr-osmosdr by doing 

 {{{ 
 git checkout standalone 
 }}} 

 then continue with 

 {{{ 
 mkdir build 
 cd build/ 
 cmake ../ 
 }}} 

 Now cmake should print out a summary of enabled/disabled components. You may disable certain components by following guidelines shown by cmake. Make sure the device of your interest is listed here. Check your dependencies and retry otherwise. 
 {{{ 
 -- ###################################################### 
 -- # gr-osmosdr enabled components                          
 -- ###################################################### 
 --     * Python support 
 --     * Osmocom IQ Imbalance Correction 
 --     * sysmocom OsmoSDR 
 --     * FUNcube Dongle 
 --     * FUNcube Dongle Pro+ 
 --     * IQ File Source 
 --     * Osmocom RTLSDR 
 --     * RTLSDR TCP Client 
 --     * Ettus USRP Devices 
 --     * Osmocom MiriSDR 
 --     * HackRF Jawbreaker 
 --     * nuand bladeRF 
 --  
 -- ###################################################### 
 -- # gr-osmosdr disabled components                         
 -- ###################################################### 
 --  
 -- Building for version: 4c101ea4 / 0.0.1git 
 -- Using install prefix: /usr/local 
 }}} 

 Now build & install 
 {{{ 
 make 
 sudo make install 
 sudo ldconfig 
 }}} 

 ==== Automated installation ==== 

 Marcus D. Leech has kindly integrated the forementioned build steps into his gnuradio installation script at [http://www.sbrac.org/files/build-gnuradio]. This is the most user-friendly option so far. 

 You also may try the ByBOMBS developed by gnuradio.org folks. 

 == Plugins == 

 The following 3rd party plugins are available: 

 ||'''Name'''||'''Author'''||'''URL'''|| 
 ||pocsag||who's first?||...|| 
 ||ads-b||who's first?||...|| 
 ||apco p25||who's first?||...|| 
 ||tetra||who's first?||...|| 

 [[br]] 
 Not using sdrangelove? Tell us why! :) 
 [[br]][[br]][[br]] 

 == Credits == 

 sdrangelove is developed by Christian Daniel of [http://maintech.de maintech GmbH] with contributions from Hoernchen and Dimitri Stolnikov.
Add picture from clipboard (Maximum size: 48.8 MB)