! Configuration rendered by osmo-gsm-tester password foo ! log stderr logging filter all 1 logging color 1 logging print category 1 logging print extended-timestamp 1 logging level all debug ! line vty no login bind 127.0.0.1 ! e1_input e1_line 0 driver ipa ipa bind 127.0.0.1 network network country code 001 mobile network code 01 short name osmocom long name osmocom auth policy closed location updating reject cause 13 encryption a5 1 neci 1 rrlp mode none mm info 1 handover 0 handover window rxlev averaging 10 handover window rxqual averaging 1 handover window rxlev neighbor averaging 10 handover power budget interval 6 handover power budget hysteresis 3 handover maximum distance 9999 bts 0 type sysmobts band GSM900 cell_identity 1 location_area_code 1 training_sequence_code 7 base_station_id_code 63 ms max power 33 cell reselection hysteresis 4 rxlev access min 0 channel allocator ascending rach tx integer 9 rach max transmission 7 ip.access unit_id 1801 0 oml ip.access stream_id 255 line 0 gprs mode none trx 0 rf_locked 0 arfcn 12 nominal power 20 max_power_red 0 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 hopping enabled 0 timeslot 1 phys_chan_config TCH/F hopping enabled 0 timeslot 2 phys_chan_config TCH/F hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config TCH/F hopping enabled 0