Feature #1566
closed
Dynamic PDCH / TCH switching: PCU part
Added by laforge about 8 years ago.
Updated over 7 years ago.
Description
this involves PCU, BTS and BSC. This ticket is about the PCU part.
The PCU-BTS API already permits for dynamic addition/removal of PDCHs. Not sure if it is sufficient, but the basics are there.
On the PCU side it appears like all required code is in place, but it requires testing.
- Related to Feature #1565: Dynamic PDCH / TCH switching: BTS part added
- Related to Feature #1567: Dynamic PDCH / TCH switching: BSC part added
- Due date set to 06/10/2016
- Priority changed from Normal to High
- Priority changed from High to Urgent
- Subject changed from Dynamic PDCH / TCH switching to Dynamic PDCH / TCH switching: PCU part
- Assignee set to neels
- Status changed from New to In Progress
As part of this ticket it was assumed that we need to add an ACK message
from the PCU for PDCH deactivation.
During PDCH deactivation, we call pcu_tx_info_ind() to update the channel
infos towards the PCU. The PCU already responds with a channel deactivation
message to the BTS, so it seems there is in fact no change needed for the PCU.
(not changing the % Done until verified.)
- Status changed from In Progress to Resolved
- % Done changed from 0 to 100
osmo-pcu in fact needs no changes for dyn PDCH at all, as verified by the sysmoBTS implementation.
On pcu_tx_info_ind(), osmo-pcu properly responds with activation and deactivation requests to the BTS.
- Status changed from Resolved to Closed
- Target version set to Dynamic TCH/H TCH/F PDCH
Also available in: Atom
PDF
