osmo-bts fails to activate Osmocom-style dynamic PDCH as TCH/F or TCH/H
When trying to activate an osmocom-style dynamic PDCH as either TCHF or TCH/H, I'm getting CHAN ACT NACK like this:
DRSL <0000> rsl.c:164 (bts=0,trx=0,ts=4,pchan=TCH/F_TCH/H_PDCH as NONE) RSL rx DCHAN: mismatching chan_nr=0x0c DRSL <0000> rsl.c:2611 Rx RSL CHAN_ACTIV for unknown lchan DRSL <0000> rsl.c:710 0x0c: Sending Channel Activated NACK: cause = 0x64
it doesn't matter if this is just after start-up, or whether the dyn PDCH was already active as PDCH before (and deactivated again).
BTS_Tests.TC_dyn_osmo_pdch_tchh_act for this.
#2 Updated by laforge over 1 year ago
- Status changed from New to In Progress
- Assignee changed from sysmocom to laforge
- Priority changed from Normal to High
- % Done changed from 0 to 20
This regression was introduced in