Actions
Support #4064
closedbom / parts order / production of 3 clock-gen v2 prototypes
Start date:
06/19/2019
Due date:
% Done:
100%
Spec Reference:
Updated by mschramm about 5 years ago
- Target version set to hw-v2
- % Done changed from 10 to 20
parts have arrived, waiting for the v2 PCBs.
Updated by roh almost 5 years ago
boards have arrived and one prototype was completed on 2019-07-05
is there already software for this to flash and test the board?
Updated by laforge almost 5 years ago
Updated by laforge over 4 years ago
Updated by mschramm over 4 years ago
- % Done changed from 20 to 30
We still have two unpopulated v2 PCBs and enough parts for these two PCBAs.
Updated by roh over 4 years ago
we have 2 more completed pcb now. i debugged the soldering it till i got a swd connect on both boards to the mcu. clock chip still needs validation.
Updated by laforge about 4 years ago
- Status changed from In Progress to Resolved
- % Done changed from 30 to 100
Updated by laforge over 2 years ago
does anyone recall where those prototype boards went? Kyle Tuft has shown up on twitter (https://twitter.com/tuftkyle/status/1506730186556936195?s=20&t=1v497Jmcly_X1lY39kB9JQ) and is interested in moving the project ahead (i.e. SAMD21 firmware).
Actions