Project

General

Profile

Bug #4757

osmo-bts-sysmo-remote for L1 forwarding not operational

Added by keith about 1 month ago. Updated about 1 month ago.

Status:
Feedback
Priority:
Normal
Assignee:
Category:
-
Target version:
-
Start date:
09/16/2020
Due date:
% Done:

90%

Spec Reference:

Description

This is since commit 2ff4592ffc, reverting that commit restores operation.

I'm not 100% sure what's happening, but i think this diff between a binary with the commit reverted and master shows something happening out of order. Something is happening in master before l1if_open() logs "sysmoBTSv2 L1IF compiled against...."

It may be something needs to be called in l1_fwd_main.c (maybe l1_transp_fwd.c) now to match new logic?

If this diff is not enough, I can post more logs etc

--- good.log    2020-09-16 20:29:42.611112284 +0200
+++ notsogood.log    2020-09-16 20:34:29.386768665 +0200
@@ -1,39 +1,39 @@
 DLSTATS INFO <0019> stats.c:197 Stats timer started with interval 5 sec
-DLINP INFO <0012> e1_input.c:466 E1L(0) Line (0x2524df0) reference count ctor changed 0 -> 1 [1 (ctor)]
+DLINP INFO <0012> e1_input.c:466 E1L(0) Line (0xebedf0) reference count ctor changed 0 -> 1 [1 (ctor)]
 DLCTRL NOTICE <0017> control_if.c:911 CTRL at 127.0.0.1 4238
 DLGLOBAL NOTICE <0010> telnet_interface.c:104 Available via telnet 127.0.0.1 4241
 DPCU INFO <0009> pcu_sock.c:1026 Started listening on PCU socket: /tmp/pcu_bts
-DLINP INFO <0012> e1_input.c:514 E1L(0) Line (0x2524df0) reference count unknown changed 0 -> 1 [2 (ctor,unknown)]
+DLINP INFO <0012> e1_input.c:514 E1L(0) Line (0xebedf0) reference count unknown changed 0 -> 1 [2 (ctor,unknown)]
 DLINP NOTICE <0012> input/ipaccess.c:1060 enabling ipaccess BTS mode, OML connecting to 172.16.0.1:3002
 DL1C INFO <0006> phy_link.c:58 phy0: PHY link state change shutdown -> connecting
-DL1C INFO <0006> l1_if.c:1654 sysmoBTSv2 L1IF compiled against API headers v5.1.0
-DL1C INFO <0006> l1_transp_fwd.c:113 sizeof(SuperFemto_Prim_t) = 1960
-DL1C INFO <0006> l1_transp_fwd.c:109 sizeof(GsmL1_Prim_t) = 216
-DL1C INFO <0006> l1_if.c:183 Tx SYS prim LAYER1-RESET.req
-DL1C NOTICE <0006> l1_if.c:1866 Assuming 1002 for sysmoBTS Model number 65535
-DL1C INFO <0006> phy_link.c:58 phy0: PHY link state change connecting -> connected
-DL1C INFO <0006> phy_link.c:68 phy0.0: trx_set_avail(1)
-DSUM INFO <000f> bts_trx.c:181 TRX(0): Setting available = 1
-DOML INFO <0001> oml.c:353 OC=RADIO-CARRIER INST=(00,00,ff) AVAIL STATE Power off -> OK
+DSUM INFO <000f> bts_trx.c:192 (bts=0,trx=0) Setting operative = Disabled
+DOML INFO <0001> oml.c:353 OC=RADIO-CARRIER INST=(00,00,ff) AVAIL STATE Power off -> Not installed
 DOML INFO <0001> oml.c:360 OC=RADIO-CARRIER INST=(00,00,ff) OPER STATE NULL -> Disabled
-DOML INFO <0001> oml.c:353 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) AVAIL STATE Power off -> OK
-DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,00) AVAIL STATE Power off -> OK
+DOML INFO <0001> oml.c:353 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) AVAIL STATE Power off -> Not installed
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,00) AVAIL STATE Power off -> Not installed
 DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,00) OPER STATE NULL -> Disabled
-DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,01) AVAIL STATE Power off -> OK
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,01) AVAIL STATE Power off -> Not installed
 DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,01) OPER STATE NULL -> Disabled
-DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,02) AVAIL STATE Power off -> OK
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,02) AVAIL STATE Power off -> Not installed
 DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,02) OPER STATE NULL -> Disabled
-DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,03) AVAIL STATE Power off -> OK
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,03) AVAIL STATE Power off -> Not installed
 DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,03) OPER STATE NULL -> Disabled
-DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,04) AVAIL STATE Power off -> OK
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,04) AVAIL STATE Power off -> Not installed
 DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,04) OPER STATE NULL -> Disabled
-DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,05) AVAIL STATE Power off -> OK
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,05) AVAIL STATE Power off -> Not installed
 DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,05) OPER STATE NULL -> Disabled
-DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,06) AVAIL STATE Power off -> OK
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,06) AVAIL STATE Power off -> Not installed
 DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,06) OPER STATE NULL -> Disabled
-DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,07) AVAIL STATE Power off -> OK
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,07) AVAIL STATE Power off -> Not installed
 DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,07) OPER STATE NULL -> Disabled
-DLINP NOTICE <0012> input/ipa.c:128 172.16.0.1:3002 connection done
+DL1C INFO <0006> l1_if.c:1654 sysmoBTSv2 L1IF compiled against API headers v5.1.0
+DL1C INFO <0006> l1_transp_fwd.c:113 sizeof(SuperFemto_Prim_t) = 1960
+DL1C INFO <0006> l1_transp_fwd.c:109 sizeof(GsmL1_Prim_t) = 216
+DL1C INFO <0006> l1_if.c:183 Tx SYS prim LAYER1-RESET.req
+DL1C NOTICE <0006> l1_if.c:1866 Assuming 1002 for sysmoBTS Model number 65535
+DL1C INFO <0006> phy_link.c:58 phy0: PHY link state change connecting -> connected
+DSUM INFO <000f> bts_trx.c:192 (bts=0,trx=0) Setting operative = Disabled
+DLINP NOTICE <0012> input/ipa.c:128 172.16.0.1:3002 connection done
 DLINP NOTICE <0012> input/ipaccess.c:882 received ID_GET for unit ID 1000/15/0
 DLINP INFO <0012> input/ipaccess.c:801  tag 8: 1000/15/0
 DLINP INFO <0012> input/ipaccess.c:801  tag 7: 10:65:30:15:8b:ab
@@ -44,16 +44,11 @@
 DLINP INFO <0012> input/ipaccess.c:801  tag 1: sysmoBTS-10-65-30-15-8b-ab
 DLINP INFO <0012> input/ipaccess.c:801  tag 0: 
 DABIS INFO <000d> abis.c:108 OML Signalling link up
-DLINP INFO <0012> e1_input.c:612 E1L(0) Line (0x2524df0) reference count e1inp_sign_link changed 0 -> 1 [3 (ctor,unknown,e1inp_sign_link)]
+DLINP INFO <0012> e1_input.c:612 E1L(0) Line (0xebedf0) reference count e1inp_sign_link changed 0 -> 1 [3 (ctor,unknown,e1inp_sign_link)]
 DSUM INFO <000f> bts.c:391 Main link established, sending NM Status.
 DL1C NOTICE <0006> l1_if.c:1528 Rx L1-RESET.conf (status=Success)
 DL1C INFO <0006> l1_if.c:1565 Tx SET-TRACE-FLAGS.req (0x00000000)
 DL1C INFO <0006> l1_if.c:183 Tx SYS prim SYSTEM-INFO.req
-DL1C INFO <0006> l1_if.c:1469 DSP v5.1.1, FPGA v5.1.0
-nDL1C INFO <0006> l1_if.c:1329 Using external attenuator.
-DL1C INFO <0006> l1_if.c:183 Tx SYS prim ACTIVATE-RF.req
-DL1C NOTICE <0006> calib_file.c:190 MAC Address is 24:62:78:00:03:da -> NO FIXUP
-DL1C INFO <0006> l1_if.c:183 Tx SYS prim SET-RX-CALIB.req
 DOML ERROR <0001> oml.c:221 (bts=0,trx=0): O&M Get Attributes [0], Manufacturer Dependent State is unsupported by TRX.
 DOML NOTICE <0001> oml.c:643 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[0] (150 ms) as sent by BSC due to suspected LAPDm bug!
 DOML NOTICE <0001> oml.c:643 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[1] (180 ms) as sent by BSC due to suspected LAPDm bug!
@@ -62,7 +57,12 @@
 DOML NOTICE <0001> oml.c:643 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[4] (520 ms) as sent by BSC due to suspected LAPDm bug!
 DOML NOTICE <0001> oml.c:643 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[5] (165 ms) as sent by BSC due to suspected LAPDm bug!
 DOML NOTICE <0001> oml.c:643 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[6] (1680 ms) as sent by BSC due to suspected LAPDm bug!
-DOML NOTICE <0001> oml.c:1042 OC=BTS(01) INST=(00,ff,ff): ADM STATE Locked -> Unlocked
+DL1C INFO <0006> l1_if.c:1469 DSP v5.1.1, FPGA v5.1.0
+nDL1C INFO <0006> l1_if.c:1329 Using external attenuator.
+DL1C INFO <0006> l1_if.c:183 Tx SYS prim ACTIVATE-RF.req
+DL1C NOTICE <0006> calib_file.c:190 MAC Address is 24:62:78:00:03:da -> NO FIXUP
+DL1C INFO <0006> l1_if.c:183 Tx SYS prim SET-RX-CALIB.req
+DOML NOTICE <0001> oml.c:1042 OC=BTS(01) INST=(00,ff,ff): ADM STATE Locked -> Unlocked
 DOML INFO <0001> oml.c:360 OC=BTS INST=(00,ff,ff) OPER STATE NULL -> Enabled
 DOML INFO <0001> oml.c:353 OC=BTS INST=(00,ff,ff) AVAIL STATE Dependency -> OK
 DOML INFO <0001> oml.c:353 OC=GPRS-NSE INST=(00,ff,ff) AVAIL STATE Dependency -> OK
@@ -84,21 +84,24 @@
 DOML NOTICE <0001> oml.c:1037 OC=BTS(01) INST=(00,ff,ff): ADM state already was Unlocked
 DL1C INFO <0006> l1_if.c:1231 Rx RF-ACT.conf (status=Success)
 DL1C INFO <0006> main.c:127 Set global status #0 to 1 (0000 -> 0001), LEDs: ACT 1
-DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,00) AVAIL STATE OK -> Dependency
+DOML INFO <0001> oml.c:353 OC=RADIO-CARRIER INST=(00,00,ff) AVAIL STATE Not installed -> OK
+DOML INFO <0001> oml.c:360 OC=RADIO-CARRIER INST=(00,00,ff) OPER STATE Disabled -> Disabled
+DOML INFO <0001> oml.c:353 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) AVAIL STATE Not installed -> OK
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,00) AVAIL STATE Not installed -> Dependency
 DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,00) OPER STATE Disabled -> Disabled
-DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,01) AVAIL STATE OK -> Dependency
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,01) AVAIL STATE Not installed -> Dependency
 DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,01) OPER STATE Disabled -> Disabled
-DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,02) AVAIL STATE OK -> Dependency
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,02) AVAIL STATE Not installed -> Dependency
 DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,02) OPER STATE Disabled -> Disabled
-DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,03) AVAIL STATE OK -> Dependency
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,03) AVAIL STATE Not installed -> Dependency
 DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,03) OPER STATE Disabled -> Disabled
-DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,04) AVAIL STATE OK -> Dependency
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,04) AVAIL STATE Not installed -> Dependency
 DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,04) OPER STATE Disabled -> Disabled
-DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,05) AVAIL STATE OK -> Dependency
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,05) AVAIL STATE Not installed -> Dependency
 DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,05) OPER STATE Disabled -> Disabled
-DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,06) AVAIL STATE OK -> Dependency
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,06) AVAIL STATE Not installed -> Dependency
 DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,06) OPER STATE Disabled -> Disabled
-DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,07) AVAIL STATE OK -> Dependency
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,07) AVAIL STATE Not installed -> Dependency
 DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Disabled
 DL1C NOTICE <0006> calib_file.c:430 L1 calibration table calib_rxu_850.cfg loaded (src: eeprom)
 DL1C INFO <0006> l1_if.c:183 Tx SYS prim SET-RX-CALIB.req
@@ -120,13 +123,11 @@
 DL1C INFO <0006> tx_power.c:252 (bts=0,trx=0) power_ramp_start(cur=0, tgt=-1000)
 DOML INFO <0001> oml.c:353 OC=RADIO-CARRIER INST=(00,00,ff) AVAIL STATE OK -> OK
 DOML INFO <0001> oml.c:360 OC=RADIO-CARRIER INST=(00,00,ff) OPER STATE Disabled -> Enabled
+DOML NOTICE <0001> oml.c:1042 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): ADM STATE Locked -> Unlocked
 DL1C NOTICE <0006> calib_file.c:430 L1 calibration table calib_rxd_850.cfg loaded (src: eeprom)
 DL1C INFO <0006> l1_if.c:183 Tx SYS prim SET-RX-CALIB.req
-DOML NOTICE <0001> oml.c:1042 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): ADM STATE Locked -> Unlocked
-DOML INFO <0001> oml.c:360 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) OPER STATE NULL -> Enabled
-DL1C NOTICE <0006> calib_file.c:430 L1 calibration table calib_rxd_900.cfg loaded (src: eeprom)
-DL1C INFO <0006> l1_if.c:183 Tx SYS prim SET-RX-CALIB.req
-DOML INFO <0001> oml.c:1358 (bts=0,trx=0): Rx IPA RSL CONNECT IP=172.16.0.1 PORT=3003 STREAM=0x00
+DOML INFO <0001> oml.c:360 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) OPER STATE NULL -> Enabled
+DOML INFO <0001> oml.c:1358 (bts=0,trx=0): Rx IPA RSL CONNECT IP=172.16.0.1 PORT=3003 STREAM=0x00
 DLINP NOTICE <0012> input/ipa.c:128 172.16.0.1:3003 connection done
 DLINP NOTICE <0012> input/ipaccess.c:882 received ID_GET for unit ID 1000/15/0
 DLINP INFO <0012> input/ipaccess.c:801  tag 8: 1000/15/0
@@ -138,20 +139,33 @@
 DLINP INFO <0012> input/ipaccess.c:801  tag 1: sysmoBTS-10-65-30-15-8b-ab
 DLINP INFO <0012> input/ipaccess.c:801  tag 0: 
 DABIS INFO <000d> abis.c:122 RSL Signalling link for TRX0 up
-DLINP INFO <0012> e1_input.c:612 E1L(0) Line (0x2524df0) reference count e1inp_sign_link changed 1 -> 2 [4 (ctor,unknown,2*e1inp_sign_link)]
-DSUM INFO <000f> bts_trx.c:159 (bts=0,trx=0) RSL link up
-DRSL INFO <0000> rsl.c:278 Tx RSL RF RESource INDication
-DL1C NOTICE <0006> calib_file.c:430 L1 calibration table calib_rxd_1800.cfg loaded (src: eeprom)
+DLINP INFO <0012> e1_input.c:612 E1L(0) Line (0xebedf0) reference count e1inp_sign_link changed 1 -> 2 [4 (ctor,unknown,2*e1inp_sign_link)]
+DSUM INFO <000f> bts_trx.c:162 (bts=0,trx=0) RSL link up
+DSUM INFO <000f> bts_trx.c:192 (bts=0,trx=0) Setting operative = Enabled
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,00) AVAIL STATE Dependency -> OK
+DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,00) OPER STATE Disabled -> Enabled
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,01) AVAIL STATE Dependency -> OK
+DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,01) OPER STATE Disabled -> Enabled
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,02) AVAIL STATE Dependency -> OK
+DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,02) OPER STATE Disabled -> Enabled
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,03) AVAIL STATE Dependency -> OK
+DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,03) OPER STATE Disabled -> Enabled
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,04) AVAIL STATE Dependency -> OK
+DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,04) OPER STATE Disabled -> Enabled
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,05) AVAIL STATE Dependency -> OK
+DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,05) OPER STATE Disabled -> Enabled
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,06) AVAIL STATE Dependency -> OK
+DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,06) OPER STATE Disabled -> Enabled
+DOML INFO <0001> oml.c:353 OC=CHANNEL INST=(00,00,07) AVAIL STATE Dependency -> OK
+DOML INFO <0001> oml.c:360 OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Enabled
+DRSL INFO <0000> rsl.c:278 Tx RSL RF RESource INDication
+DOML INFO <0001> oml.c:969 OC=CHANNEL(03) INST=(00,00,00): SET CHAN ATTR (TSC=7 pchan=CCCH)
+DL1C NOTICE <0006> calib_file.c:430 L1 calibration table calib_rxd_900.cfg loaded (src: eeprom)
 DL1C INFO <0006> l1_if.c:183 Tx SYS prim SET-RX-CALIB.req
-DOML INFO <0001> oml.c:969 OC=CHANNEL(03) INST=(00,00,00): SET CHAN ATTR (TSC=7 pchan=CCCH)
-DOML NOTICE <0001> oml.c:1042 OC=CHANNEL(03) INST=(00,00,00): ADM STATE Locked -> Unlocked
-DL1C NOTICE <0006> calib_file.c:430 L1 calibration table calib_rxd_1900.cfg loaded (src: eeprom)
-DL1C INFO <0006> l1_if.c:183 Tx SYS prim SET-TX-CALIB.req
 DRSL INFO <0000> rsl.c:3013 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO
 DRSL INFO <0000> rsl.c:330  Rx RSL BCCH INFO (SI1, 23 bytes)
 DPAG INFO <0005> paging.c:674 Paging SI update
-DL1P INFO <0007> l1_if.c:166 Tx L1 prim MPH-CONNECT.req
-DRSL INFO <0000> rsl.c:3013 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO
+DRSL INFO <0000> rsl.c:3013 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO
 DRSL INFO <0000> rsl.c:330  Rx RSL BCCH INFO (SI2, 23 bytes)
 DPAG INFO <0005> paging.c:674 Paging SI update
 DRSL INFO <0000> rsl.c:3013 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO
@@ -160,6 +174,7 @@
 DRSL INFO <0000> rsl.c:3013 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO
 DRSL INFO <0000> rsl.c:399  RX RSL Disabling BCCH INFO (SI2ter)
 DPAG INFO <0005> paging.c:674 Paging SI update
+DOML NOTICE <0001> oml.c:1042 OC=CHANNEL(03) INST=(00,00,00): ADM STATE Locked -> Unlocked
 DRSL INFO <0000> rsl.c:3013 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO
 DRSL INFO <0000> rsl.c:399  RX RSL Disabling BCCH INFO (SI2quater)
 DPAG INFO <0005> paging.c:674 Paging SI update
@@ -177,6 +192,8 @@
 DPCU INFO <0009> pcu_sock.c:160 Sending info
 DPCU INFO <0009> pcu_sock.c:175 BTS is up
 DPCU NOTICE <0009> pcu_sock.c:763 PCU socket not connected, dropping message
+DL1C NOTICE <0006> calib_file.c:430 L1 calibration table calib_rxd_1800.cfg loaded (src: eeprom)
+DL1C INFO <0006> l1_if.c:183 Tx SYS prim SET-RX-CALIB.req

History

#1 Updated by keith about 1 month ago

  • Description updated (diff)

#2 Updated by keith about 1 month ago

  • Description updated (diff)

#3 Updated by pespin about 1 month ago

  • Status changed from New to Feedback
  • % Done changed from 0 to 90

Should be fixed by:
https://gerrit.osmocom.org/c/osmo-bts/+/20176 oml: Set RadioChannel operational state to Enabled only during OPSTART

Also available in: Atom PDF

Add picture from clipboard (Maximum size: 48.8 MB)