Project

General

Profile

Actions

Feature #6137

open

ip.access Nano3G

Added by Kira 7 months ago. Updated 4 months ago.

Status:
New
Priority:
Normal
Assignee:
Target version:
-
Start date:
08/16/2023
Due date:
% Done:

0%

Spec Reference:

Description

Hello,
I bought an ip.access nano3G S8 femtocell, but it turned out to be blocked (I can not connect via telnet, ssh and web interface).
Is there any way to unlock it? Or should I buy another cell for 3G?

Actions #1

Updated by laforge 6 months ago

  • Project changed from Cellular Network Infrastructure to OsmoHNBGW
Actions #2

Updated by laforge 4 months ago

  • Assignee set to lynxis
Actions #3

Updated by lynxis 4 months ago

@kira the telnet, ssh or webui isn't usually available. The 3gstarter nano3g is using a modified firmware.
It is only possible to flash nano3g which comes with an very old firmware.

As alternative it could be possible to use the nano3g with your current firmware, but configuring it via
tr69.

Could you try to get the commission webui access using the reset button?

  1. Press the reset button
  2. first the service led (antenna symbol) flashes quick, then slower
  3. Release the button when the led flashes slower.

After some time the S8 is reachable via 192.168.0.1/24 for 60 sec.
http://192.168.0.1/

Actions

Also available in: Atom PDF

Add picture from clipboard (Maximum size: 48.8 MB)