Filter Replacement » History » Version 11
Anonymous, 02/19/2016 10:48 PM
We don't sell the kits anymore
1 | 1 | == Motorola filter replacement == |
|
---|---|---|---|
2 | |||
3 | 10 | nion | In order to use the phone as a passive uplink sniffer, you will have to remove and replace the RX filters. |
4 | 9 | nion | |
5 | 1 | To replace filters on Motorola phones you will need: |
|
6 | |||
7 | * [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=HHM1526 HHM1526] |
||
8 | * [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=HHM1523C1 HHM1523C1] |
||
9 | * [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=04025A150JAT2A 04025A150JAT2A] |
||
10 | * [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=04025A220JAT2A 04025A220JAT2A] |
||
11 | |||
12 | 5 | laforge | |
13 | 2 | === Remove existing baluns === |
|
14 | |||
15 | First you will need to remove existing balun: |
||
16 | |||
17 | [[Image(motorola_filter_replacement_step_1_low.jpg, 250px)]] |
||
18 | [[Image(motorola_filter_replacement_step_2_low.jpg, 250px)]] |
||
19 | |||
20 | === Solder new baluns === |
||
21 | |||
22 | Clean up the phone and solder HHM1526 and HHM1523C1 on the right places (the black dot goes up): |
||
23 | |||
24 | [[Image(motorola_filter_replacement_step_3_low.jpg, 250px)]] |
||
25 | [[Image(motorola_filter_replacement_step_4_low.jpg, 250px)]] |
||
26 | [[Image(motorola_filter_replacement_step_5_low.jpg, 250px)]] |
||
27 | |||
28 | 3 | === Solder ceramic capacitors === |
|
29 | 2 | ||
30 | 4 | Last step is to solder ceramic capacitors 04025A150JAT2A and 04025A220JAT2A: |
|
31 | 2 | ||
32 | [[Image(motorola_filter_replacement_step_6_low.jpg, 250px)]] |
||
33 | [[Image(motorola_filter_replacement_step_7_low.jpg, 250px)]] |
||
34 | |||
35 | === Credits === |
||
36 | |||
37 | 8 | stuge | Thanks to [http://246tnt.com/gsm/rx_filter.html Sylvain] and Peter who made this possible. |