Project

General

Profile

Actions

Iota » History » Revision 2

« Previous | Revision 2/13 (diff) | Next »
laforge, 02/19/2016 10:48 PM


This is the Analog Baseband Chip TWL3025

TSP

The CLK6.5 Signal makes things a bit more complicated than we would like. The sequence of events is something like: * CLK_13M is applied continuously to TSL3025 * nTEN is in default state of high (inactive) * internal CLK6.5 is in default state low * nTEN is asserted low by TPU, some 0..65ns before CLK_13M rising edge * next CLK13M falling edge starts first CLK6.5 rising edge * every falling edge of CLK13M toggles CLK6.5 * TDR is sampled at every rising edge of CLK6.5 (including the first edge above) * 7 bits are transferred during seven rising edges of CLK6.5 * TEN stays asserted for 1 CLK13M period after last bit is transferred * TEN needs to be released before next CLK13M rising edge to prevent another transfer

[[Image(Iota:twl3025_tsp_serial.png)]]

Files (1)
twl3025_usp.png View twl3025_usp.png 10.2 KB The USP as measured on a C123 phone laforge, 01/26/2010 06:56 PM

Updated by laforge about 8 years ago · 2 revisions

Add picture from clipboard (Maximum size: 48.8 MB)