Project

General

Profile

Actions

Mobile » History » Revision 9

« Previous | Revision 9/15 (diff) | Next »
Anonymous, 02/19/2016 10:49 PM


PageOutline = The {{{mobile}}} program =

The {{{mobile}}} program is one of the various host (PC) based programs that you can use together with the {{{layer1.*.bin}}} firmware images inside the phone.

{{{mobile}}} is the most sophisticated OsmocomBB application so far. It implements most of the behavior of a regular GSM telephone, but is
extended in many ways with features interesting to researchers.

Using {{{mobile}}}, you can e.g. * perform cell (re)selection according to TS 03.22 * MM procedures like location updating, authentication, encryption * Establish MT and MO voice calls * Send and receive SMS * Perform supplementary services like USSD or call forwarding * hook it up to a PBX

In the spirit of all Osmocom projects, the user interface of {{{mobile}}} is based on text commands issued on the command line.

Prerequirements

It is assumed that you have already obtained the OsmocomBB source code and compiled both the host programs as well as the firmware
(using a cross-compiler). Please see the general OsmocomBB GettingStarted for guidance.

Getting started with {{{mobile}}}

You need to follow the usual procedure using a CalypsoSerialCable, [wiki:osmocon] and the {{{layer1.*.bin}}} firmware image for your phone.

{{{mobile}}} working: * uses the configuration file {{{~/.osmocom/bb/mobile.cfg}}} * creates a {{{vty}}} (virtual terminal) on port 4247 (per default) * prints the debug messages to stdout * sends debug messages using [wiki:GSMTAP]

To start {{{mobile}}}: {{{
cd osmocom-bb/src/host/layer23/src/mobile/
./mobile -i 127.0.0.1
}}}

Note:
You should: * start {{{mobile}}} * start [wiki:osmocon] and load the {{{layer1.*.bin}}} firmware image for your phone * press the start button on your phone
To capture sent and received packets: * launch wireshark: $ nc -u -l -p 4729 > /dev/null & wireshark -k -i lo -f 'port 4729'

To connect to the {{{vty}}}: {{{
telnet localhost 4247
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Welcome to the OsmocomBB Control interface
OsmocomBB>
}}}

Command Reference

{{{mobile}}} usage: {{{
Usage: ./mobile
Some help...
-h --help this text
-i --gsmtap-ip The destination IP used for GSMTAP.
-v --vty-port The VTY port number to telnet to. (default 4247)
-d --debug Change debug flags.
}}}

{{{vty}}} usage:
TODO

Missing features * Handover support Authors

{{{mobile}}} was primarily written by Andreas Eversberg, based on some initial work that Harald did on layer23. The list of contributors is long, see the git log for details.

Files (0)

Updated by about 8 years ago · 9 revisions

Add picture from clipboard (Maximum size: 48.8 MB)