MotorolaC155 » History » Version 7
laforge, 02/19/2016 10:48 PM
1 | 5 | laforge | [[PageOutline]] |
---|---|---|---|
2 | 1 | laforge | = Motorola C155 = |
3 | |||
4 | The C155 seems to be one of many ODM phones that Motorola bought from Compal communications in Taiwan. It is of the same family as the C118, C123, etc. |
||
5 | |||
6 | 2 | laforge | The internal name of the hardware is E99. |
7 | |||
8 | 7 | laforge | Compared to the [wiki:MotorolaC123], this phone offers |
9 | * a color LCD (same resolution) |
||
10 | * four times bigger RAM (2MByte) |
||
11 | * four times bigger NOR Flash (8MByte) |
||
12 | |||
13 | 1 | laforge | == Specifications == |
14 | * GSM 900 / GSM 1800 dual-band |
||
15 | * 101x45x21 mm, 86 grams |
||
16 | * GPRS |
||
17 | * 920mAh Li-Ion battery |
||
18 | * Ti Calypso/Iota/Rita chipset |
||
19 | |||
20 | == Hardware == |
||
21 | |||
22 | === GSM Chipset === |
||
23 | |||
24 | * DBB: Ti Calypso Baseband, D751749GHH model (Calypso Lite G2), includes 256kBytes of internal SRAM |
||
25 | * ABB: Ti TWL3014C |
||
26 | * RF: TRF6151C |
||
27 | * RF PA: SKY77324-12 |
||
28 | |||
29 | === NOR Flash + SRAM === |
||
30 | * Intel RD38F2030W0ZBQ1 |
||
31 | * 64MBit NOR (8 MByte), bottom boot |
||
32 | * 16Mbit SRAM (2 MByte) |
||
33 | * Data sheet is in our git repository |
||
34 | |||
35 | === Display === |
||
36 | |||
37 | The display is a 96x64 pixels CSTN color LCD, attached via SPI bus to the Calypso DBB chip. |
||
38 | |||
39 | The LCD controller inside the display is a Ultrachip UC1682, for which the data sheet is available at [http://www.datasheet4u.com/html/U/C/1/UC1682_UltraChip.pdf.html]. |
||
40 | We need a proper C language driver for it (any volunteers?) |
||
41 | |||
42 | 3 | laforge | === Audio Ringtone Chip === |
43 | |||
44 | It uses a Sunplus SPMA100B chip. Datasheet unknown. |
||
45 | |||
46 | 1 | laforge | === Test Points === |
47 | |||
48 | ==== Test points accessible from battery compartment ==== |
||
49 | 6 | laforge | [[Image(MotorolaC123:compal_testpads.png)]] |
50 | 1 | laforge | |
51 | Left Row of pins (from left to right |
||
52 | * TP108 -- GND |
||
53 | * TP29 -- GND (used to be VADCID) |
||
54 | * TP37 -- GND (used to be Rx IRDA) |
||
55 | * TP27 -- DLPWR (download power on), connects to Iota:RPWON |
||
56 | * TP36 -- GND (used to be Tx IRDA) |
||
57 | * TP10 -- DTR Modem |
||
58 | |||
59 | Right row of pins (from left to right) |
||
60 | * TP8 -- TDI JTAG |
||
61 | * TP11 -- DSR Modem |
||
62 | * TP9 -- CTS Modem |
||
63 | * TP18 -- TMS JTAG |
||
64 | * TP13 -- TxD Modem |
||
65 | * TP16 -- TDO JTAG |
||
66 | * TP21 -- RTS Modem |
||
67 | * TP17 -- TCK JTAG |
||
68 | * TP14 -- RxD Modem |
||
69 | * TP3 -- DLPWR |
||
70 | |||
71 | 4 | laforge | === PCB photographs === |
72 | |||
73 | Available from [http://laforge.gnumonks.org/photoalbum/devices/motorola_compal/c155] |
||
74 | |||
75 | 1 | laforge | == Misc Notes == |
76 | |||
77 | === Bootloader === |
||
78 | |||
79 | 6 | laforge | The RAM loader of the C155 assumes that the payload is a THUMB binary. [wiki:osmocon] thus always prefixes the payload with 32bit of |
80 | 1 | laforge | object code to switch back to ARM mode before jumping to the start routine. |