Project

General

Profile

Actions

Ettus USRP B2xx family » History » Revision 21

« Previous | Revision 21/26 (diff) | Next »
wirelesss, 12/01/2016 05:27 PM


DISCLAIMER

This page is user-contributed information, and not official documentation by the Osmocom project. It might be outdated or inaccurate.
Please help by improving this document, or reporting any issues to the relevant mailing list.

This page will describe how to install and configure OpenBSC, Osmo-BTS, Osmo-TRX, Osmo-PCU and OpenGGSN to create an opensource 2G/GSM network with your Ettus USRP B200/B210 SDR hardware.

This page in under development, please stay tuned.

Pre-Req:

The following guide is created on Ubuntu 14.14.03 LTS 64bit with kernel 3.19.0-26-lowlatency

1. Installing the UHD driver stack for Ettus USRP SDRs:

http://files.ettus.com/manual/page_install.html#install_linux_ourbins

2. Installing dependencies:

apt-get install libdbi0-dev libdbd-sqlite3 build-essential libtool autoconf automake git-core pkg-config libssl-dev libpcsclite-dev libusb-1.0 libncurses5-dev libgsm1-dev libpcap-dev libc-ares-dev libtalloc-dev libsctp-dev

Create a folder, where all the projects files will be stored:

mkdir osmocom
cd osmocom

Get Opencore AMR:

wget http://downloads.sourceforge.net/project/opencore-amr/opencore-amr/opencore-amr-0.1.3.tar.gz
tar xvzf opencore-amr-0.1.3.tar.gz
cd opencore-amr-0.1.3
./configure
make
make install
ldconfig
cd ..

*Get ORTP:_

Note: 0.24.2 is not working with OpenBSC!

wget http://download.savannah.gnu.org/releases/linphone/ortp/sources/ortp-0.22.0.tar.gz
tar xvzf ortp-0.22.0.tar.gz
cd ortp-0.22.0
./configure
make
make install
ldconfig
cd ..

Please refer to Build_from_source to get, built and install source for the projects listed below.

  • libosmocore
  • libosmo-abis
  • libosmo-netif
  • openggsn
  • libosmo-sccp
  • openbsc after command autoreconf -fi enter @export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
  • osmo-pcu
  • osmo-trx
  • bts

Checkout branch: 201509-fairwaves-rebase by issuing command bellow:

 git checkout 201509-fairwaves-rebase

./configure --enable-trx

Get mISDN kernel and user space:

Note: if you see "configure: error: kernel build tree does not exist" then you need to install kernel headers.

git clone git://git.misdn.eu/mISDN.git
cd mISDN
./configure 
cp mISDN.cfg.default standalone/mISDN.cfg
make modules
make modules_install
ldconfig
cd ..

git clone git://git.misdn.eu/mISDNuser.git
cd mISDNuser
make
./configure
make
sudo make install
ldconfig
cd ..
depmod –a
modprobe mISDN_core
modprobe mISDN_dsp
modprobe mISDN_l1loop nchannel=30 interfaces=2

To auto-load the mISDN kernel modules do:

cd /etc/modules-load.d/
 cat > misdn-modules.conf
 mISDN_core
 mISDN_dsp
 mISDN_l1loop nchannel=30 interfaces=2

Hit Ctrl+C
chmod 644 misdn-modules.conf
cd /

Install Asterisk (ver 1.8 !):

On Ubuntu 14.04 there is no version 1.8 Asterisk anymore, to get it, do the following:

wget http://launchpadlibrarian.net/153943558/asterisk-modules_1.8.13.1~dfsg-3ubuntu3_amd64.deb
wget http://launchpadlibrarian.net/153943773/asterisk-config_1.8.13.1~dfsg-3ubuntu3_all.deb
wget http://launchpadlibrarian.net/153943772/asterisk-dev_1.8.13.1~dfsg-3ubuntu3_all.deb
wget http://launchpadlibrarian.net/153943557/asterisk_1.8.13.1~dfsg-3ubuntu3_amd64.deb
wget http://launchpadlibrarian.net/107480639/asterisk-core-sounds-en-gsm_1.4.22-1_all.deb
wget http://launchpadlibrarian.net/58272892/asterisk-moh-opsound-gsm_2.03-1_all.deb
dpkg -i *.deb
apt-get -f install

Otherwise the Asterisk channel driver (chan_lcr) will not compile.

Get LCR (master):

git clone git://git.misdn.eu/lcr.git/
cd lcr
autoreconf -fi
./configure --with-gsm-bs --with-misdn --with-asterisk
make
make install
cp chan_lcr.so /usr/lib/asterisk/modules/
ldconfig
cd ..

Configure the LCR interfaces:

cat > /usr/etc/lcr/interface.conf 
[GSM]
gsm-bs
tones no
earlyb no
bridge ast

[ast]
remote asterisk
context from-lcr
earlyb no
tones yes
bridge GSM

Hit Ctrl+C

Add the following two lines to the bottom of options.conf:

nano /usr/etc/lcr/options.conf

socketuser asterisk
socketgroup asterisk

Configuration of Asterisk:

You can find an attached configuration file called "extensions.conf". Please put that file and overwrite the original configuration at /etc/asterisk/exetensions.conf

Then restart asterisk:

sudo service asterisk restart

Configuring the GGSN:

Use the example configuration file called "ggsn.conf" and put it to /etc/ggsn.conf

The traffic from the UEs (mobiles, USB modems etc) are terminated on a TUN interface with the IP address: 10.0.0.1
The UEs are going to get an address from this range: 10.0.0.2 - 10.0.0.254
The GGSN will listen on 127.0.0.5. In this example all the services (BSC, GGSN, SGSN, PCU etc.) are running on the same computer.

Configuring OpenBSC, Osmo-SGSN, Osmo-PCU

Please use the attached examle config files at the bottom fo this page.

Starting the services

Please note that in this example we are going to need quite a few terminals to be open, because except for LCR, GGSN and Asterisk, we are going to run the services in foreground.

Start the GGSN:

ggsn

Start LCR:

lcr fork

Open a new terminal and start the SGSN (with the sample config file provided):

sudo osmo-sgsn -c sgsn.conf

Open a new terminal and start the BSC (with the sample config file provided):

sudo osmo-nitb -C -c openbsc.conf -T -P -m

Open a new terminal and start Osmo-TRX:

sudo osmo-trx

Open a new terminal and start Osmo-BTS (with the sample config file provided):

sudo osmobts-trx -c osmo-bts.cfg

Open a new terminal and start Osmo-PCU (with the sample config file provided):

sudo osmo-pcu -c osmo-pcu.cfg

Setting up NAT for GPRS:

In order for the UEs to be able to "see" the internet, we need to enable network address translation (NAT).

First determine which network interface is connected to the internet with:

ifconfig

After you know the interface name (for example: eth0 or eth1 or em1 etc.), run the following commands.

Note that in the second command you need to use your interface name instead of "em1".

sudo echo 1 > /proc/sys/net/ipv4/ip_forward
sudo iptables -A POSTROUTING -s 10.0.0.0/24 -t nat -o em1 -j MASQUERADE
Files (6)
ggsn.conf ggsn.conf 529 Bytes GGSN config file, put it to /etc/ggsn.conf , 09/23/2015 04:07 PM
extensions.conf extensions.conf 1.5 KB Asterisk config file, put it to /etc/asterisk/extensions.conf , 09/23/2015 04:08 PM
osmo-pcu.cfg osmo-pcu.cfg 1.04 KB Example Osmo-PCU config file , 09/23/2015 04:09 PM
sgsn.conf sgsn.conf 1.12 KB Example Osmo-SGSN config file , 09/23/2015 04:09 PM
openbsc.conf openbsc.conf 3.98 KB Example OpenBSC config file , 09/23/2015 04:09 PM
osmo-bts.cfg osmo-bts.cfg 593 Bytes Example OsmoBTS config file laforge, 04/12/2017 01:09 PM

Updated by wirelesss over 7 years ago · 21 revisions

Add picture from clipboard (Maximum size: 48.8 MB)