DUL 20 Configuration » History » Version 11
lynxis, 11/11/2020 10:34 PM
1 | 1 | lynxis | h1. DUL 20 Configuration |
---|---|---|---|
2 | |||
3 | The DUL can be configured via |
||
4 | |||
5 | * OSS-RC (Ericsson operations support system-radio and core - a centralized server) |
||
6 | * EMA (Element Manager - a Windows WebUI utility) |
||
7 | 10 | lynxis | * [[moshell]] (a java based command line utility - runs on linux) |
8 | 1 | lynxis | * ncli (a command line utility which runs on the DUL itself) |
9 | |||
10 | h2. Configuration tools |
||
11 | |||
12 | h3. EMA - Element Manager |
||
13 | |||
14 | There are different versions of this tool. An ancient version can be downloaded from the DUL itself: |
||
15 | http://169.254.1.10/em/index.html |
||
16 | |||
17 | h3. ncli |
||
18 | |||
19 | With the ncli basic operations can be performed. However the ncli usually doesn't have a ManagedObject tree loaded which means it doesn't know which attributes an ManagedObject can have. |
||
20 | |||
21 | h3. moshell |
||
22 | |||
23 | The most powerful tool to configure the DUL. It loads the ManagedObject on startup. But can also operate offline on backups. |
||
24 | 9 | lynxis | See [[moshell]] for further information. |
25 | 1 | lynxis | |
26 | h2. Backup & Recover |
||
27 | |||
28 | A backup of the DUL can be created via ftp and serial. |
||
29 | The serial is required to boot into the recovery mode. |
||
30 | |||
31 | 3 | lynxis | h3. Boot DUL into recovery |
32 | 1 | lynxis | |
33 | Configure the serial connection to **9600** baud (alternative **115200**). |
||
34 | Restart the DUL by removing the power for 5 seconds. |
||
35 | If the connection is working a boot message is shown: |
||
36 | <pre> |
||
37 | 2 | lynxis | OSE Delta PowerPC/BL410660 |
38 | Start of @(#)CXC1729957 R80L37 2013-02-01 10:34:51 GMT |
||
39 | Plug-in Unit Product Name: DUL2001 |
||
40 | Plug-in Unit Product No: KDU137533/4 |
||
41 | Plug-in Unit Product rev: R1F |
||
42 | Plug-in Unit Product Date: 20120402 |
||
43 | Plug-in Unit Product Serial: XXXXXXXXXX |
||
44 | Ethernet MAC_address 0: 0x3CCAFFEE2342 |
||
45 | RAM size: 1024 Mbytes |
||
46 | 1 | lynxis | </pre> |
47 | |||
48 | Press enter to show the login prompt `username`. |
||
49 | |||
50 | Login using username "rbs" and password "rbs". |
||
51 | <pre> |
||
52 | 2 | lynxis | username: rbs |
53 | password: |
||
54 | Welcome to OSE Shell OSE5.5. |
||
55 | $ |
||
56 | 1 | lynxis | </pre> |
57 | Enter the recovery state: |
||
58 | |||
59 | <pre> |
||
60 | 2 | lynxis | $ reload -- |
61 | [..] |
||
62 | Stop due to remain in basic/backup set |
||
63 | 1 | lynxis | </pre> |
64 | |||
65 | Verify the address of the LMT B interface. |
||
66 | |||
67 | <pre> |
||
68 | 2 | lynxis | $ ifconfig |
69 | le0: inet 169.254.1.10 netmask 255.255.0.0 broadcast 169.254.255.255 |
||
70 | 1 | lynxis | </pre> |
71 | |||
72 | If the address is not correct, the address can be set by: |
||
73 | |||
74 | <pre> |
||
75 | 2 | lynxis | $ ifconfig le0 169.254.1.10 netmask 255.255.0.0 |
76 | 1 | lynxis | </pre> |
77 | |||
78 | The DUL should be reachable by icmp/ping and ftp. |
||
79 | |||
80 | 4 | lynxis | h3. Backup |
81 | 1 | lynxis | |
82 | 3 | lynxis | Backup the "partitions" /c and /d from the DUL to be safe. |
83 | /c and /d contains configuration and system files, application and firmwares. |
||
84 | The DUL supports a ftp service. |
||
85 | |||
86 | 11 | lynxis | Note: /c is mounted as /c2 in the recovery. |
87 | |||
88 | 3 | lynxis | Mount the volume of c2 on the DUL first. |
89 | |||
90 | <pre> |
||
91 | $ mount_c2 |
||
92 | $ |
||
93 | </pre> |
||
94 | |||
95 | Use your local ftp terminal to get all data. Either graphical client or text. |
||
96 | As an example **gftp** (text version) is used in a terminal on the laptop. |
||
97 | |||
98 | <pre> |
||
99 | linux ~> mkdir backup ; cd backup |
||
100 | linux ~> gftp rbs:rbs@169.254.1.10 |
||
101 | </pre> |
||
102 | |||
103 | <pre> |
||
104 | linux ~> gftp 169.254.1.10 |
||
105 | gFTP 2.0.19, Copyright (C) 1998-2008 Brian Masney <masneyb@gftp.org>. If you have any questions, comments, or suggestions about this program, please feel free to email them to me. You can always find out the latest news about gFTP from |
||
106 | my website at http://www.gftp.org/ |
||
107 | gFTP comes with ABSOLUTELY NO WARRANTY; for details, see the COPYING file. This is free software, and you are welcome to redistribute it under certain conditions; for details, see the COPYING file |
||
108 | |||
109 | Looking up 169.254.1.10 |
||
110 | Trying 169.254.1.10:21 |
||
111 | Connected to 169.254.1.10:21 |
||
112 | 220 Welcome to OSE FTP server (Version ose5.3). |
||
113 | USER rbs |
||
114 | 230 User logged in. |
||
115 | SYST |
||
116 | 215 UNIX system type. |
||
117 | TYPE I |
||
118 | 200 Command OK. |
||
119 | PWD |
||
120 | 257 "/" is current directory. |
||
121 | ftp> |
||
122 | </pre> |
||
123 | Copy /c2 and /d recursive. |
||
124 | |||
125 | <pre> |
||
126 | ftp> mget c2 |
||
127 | [..] |
||
128 | |||
129 | ftp> mget d |
||
130 | [..] |
||
131 | </pre> |
||
132 | Depending on the software version and configuration the size can vary. E.g. 300 MB - 800 MB. |
||
133 | |||
134 | Restart the node into normal operation. |
||
135 | |||
136 | <pre> |
||
137 | $ reload |
||
138 | 1 | lynxis | </pre> |
139 | 4 | lynxis | |
140 | h2. Recovery |
||
141 | |||
142 | Ensure the DUL is booted into recovery. |
||
143 | |||
144 | <pre> |
||
145 | $ reload -- |
||
146 | $ mount_c2 |
||
147 | |||
148 | $ formathd /c2 |
||
149 | > y |
||
150 | $ formathd /d |
||
151 | > y |
||
152 | |||
153 | $ reload -- |
||
154 | $ ifconfig le0 169.254.1.10 netmask 255.255.0.0 |
||
155 | </pre> |
||
156 | |||
157 | Use ftp to copy files towards the DUL |
||
158 | <pre> |
||
159 | linux ~> gftp 169.254.1.10 |
||
160 | gFTP 2.0.19, Copyright (C) 1998-2008 Brian Masney <masneyb@gftp.org>. If you have any questions, comments, or suggestions about this program, please feel free to email them to me. You can always find out the latest news about gFTP from |
||
161 | my website at http://www.gftp.org/ |
||
162 | gFTP comes with ABSOLUTELY NO WARRANTY; for details, see the COPYING file. This is free software, and you are welcome to redistribute it under certain conditions; for details, see the COPYING file |
||
163 | |||
164 | Looking up 169.254.1.10 |
||
165 | Trying 169.254.1.10:21 |
||
166 | Connected to 169.254.1.10:21 |
||
167 | 220 Welcome to OSE FTP server (Version ose5.3). |
||
168 | USER rbs |
||
169 | 230 User logged in. |
||
170 | SYST |
||
171 | 215 UNIX system type. |
||
172 | TYPE I |
||
173 | 200 Command OK. |
||
174 | PWD |
||
175 | 257 "/" is current directory. |
||
176 | ftp> |
||
177 | </pre> |
||
178 | |||
179 | Copy /c2 and /d recursive. |
||
180 | |||
181 | <pre> |
||
182 | ftp> mput c2 |
||
183 | [..] |
||
184 | |||
185 | ftp> mput d |
||
186 | [..] |
||
187 | </pre> |
||
188 | |||
189 | Restart the DUL into normal operation. |
||
190 | |||
191 | <pre> |
||
192 | reload |
||
193 | </pre> |
||
194 | |||
195 | 3 | lynxis | |
196 | 1 | lynxis | h2. Understanding ManagedObjects |
197 | 3 | lynxis | |
198 | **TODO** |
||
199 | 1 | lynxis | |
200 | h2. Step-by-Step Configuration Howto using the moshell. |
||
201 | 5 | lynxis | |
202 | 7 | lynxis | This howto is for **L13A release**. You can check the release of the DUL with the moshell. |
203 | 5 | lynxis | |
204 | <pre> |
||
205 | moshell> cvls |
||
206 | |||
207 | [...] |
||
208 | =================================================================================================================== |
||
209 | 201111-16:36 CV Name Upgrade Package Release |
||
210 | =================================================================================================================== |
||
211 | Startable: selfconfig_autocreated1 CXP102051/18_R23BM L13A (C13.0-EP7) |
||
212 | Loaded: selfconfig_autocreated1 CXP102051/18_R23BM L13A (C13.0-EP7) |
||
213 | 1 | lynxis | Executing: selfconfig_autocreated1 CXP102051/18_R23BM L13A (C13.0-EP7) |
214 | 5 | lynxis | Last created: selfconfig_autocreated1 CXP102051/18_R23BM L13A (C13.0-EP7) |
215 | ------------------------------------------------------------------------------------------------------------------- |
||
216 | [...] |
||
217 | </pre> |
||
218 | |||
219 | 7 | lynxis | h3. Cleanup old states |
220 | 5 | lynxis | |
221 | The DUL doesn't support a factory reset method other than installing the software from the scratch using the Recovery method. |
||
222 | The following howto cleans up most of the old state. |
||
223 | |||
224 | <pre> |
||
225 | # load full mom tree |
||
226 | lt all |
||
227 | |||
228 | # do not ask for confirmation |
||
229 | uv del_confirmation=0 |
||
230 | uv bldebset_confirmation=0 |
||
231 | |||
232 | bl IpSystem=1,IpSec |
||
233 | del IpSystem=1,IpSec |
||
234 | |||
235 | # returns errors if no ntp is defined |
||
236 | acc ManagedElementData=1 deleteNtpThird |
||
237 | acc ManagedElementData=1 deleteNtpSecondary |
||
238 | acc ManagedElementData=1 deleteNtpPrimary |
||
239 | |||
240 | # remove all cells |
||
241 | rdel ENodeBFunction=1,EUtranCellFDD |
||
242 | rdel ENodeBFunction=1,Cdma2000Network |
||
243 | rdel ENodeBFunction=1,GeraNetwork |
||
244 | rdel ENodeBFunction=1,UtraNetwork |
||
245 | |||
246 | # clear old MO from EnodeBFunction to recreate the refMos |
||
247 | set ENodeBFunction=1 upIpAccessHostRef |
||
248 | set ENodeBFunction=1 sctpRef |
||
249 | |||
250 | del TransportNetwork=1,Sctp=1 |
||
251 | |||
252 | # clean up synchronizsation |
||
253 | set TimingUnit gpsOutEnabled false |
||
254 | # get a list of activated synchronisations |
||
255 | get Synchronization=1 |
||
256 | # remove all entries with `syncReference =` |
||
257 | accn Synchronization=1 removeSyncRefResource IpSystem=1,IpAccessHostEt=1,IpSyncRef=1 |
||
258 | accn Synchronization=1 removeSyncRefResource Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 |
||
259 | del TuSyncRef |
||
260 | del IpSyncRef |
||
261 | |||
262 | # remove remaining Ip Mo |
||
263 | del IpSystem=1,IpAccessSctp |
||
264 | del IpSystem=1,IpAccessHostEt |
||
265 | |||
266 | # ensure the NodeIp is set to 169.254.1.10 |
||
267 | get IpOam=1,Ip=1,EthernetLink=1 |
||
268 | # check ipv4Addresses => 169.254.1.10 prefix = 16 |
||
269 | # if not, set it |
||
270 | # ensure the nodeInterfaceName is set to le0 |
||
271 | get IpOam=1,Ip=1 nodeInterfaceName |
||
272 | set IpOam=1,Ip=1 nodeInterfaceName le0 |
||
273 | # The IP now changing. exit moshell and reconnect. |
||
274 | |||
275 | del IpOam=1,Ip=1,IpHostLink |
||
276 | del Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface |
||
277 | del Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1 |
||
278 | # clean up the equipment |
||
279 | del ENodeBFunction=1,SectorCarrier |
||
280 | bl SectorEquipmentFunction |
||
281 | del SectorEquipmentFunction |
||
282 | rdel Equipment=1,AntennaUnitGroup |
||
283 | |||
284 | # remove all connection of the DUL CPRI ports |
||
285 | get Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort remoteRiPortRef |
||
286 | set Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort remoteRiPortRef |
||
287 | |||
288 | # check for RRUS |
||
289 | lpr Equipment=1,AuxPlugInUnit |
||
290 | # if only RUS/RRUS appear, remove them |
||
291 | rdel Equipment=1,AuxPlugInUnit |
||
292 | |||
293 | # check for RUS |
||
294 | lpr Equipment=1 |
||
295 | # remove other old RUS |
||
296 | </pre> |
||
297 | |||
298 | h3. setup an empty node |
||
299 | |||
300 | **It's unsure to what the license is bound. It's expected to bound to a uniqueName or the logicalName. |
||
301 | License issues will show up in the alarm list `al`.** |
||
302 | |||
303 | <pre> |
||
304 | 8 | lynxis | # load full mom tree |
305 | lt all |
||
306 | |||
307 | # do not ask for confirmation |
||
308 | uv del_confirmation=0 |
||
309 | uv bldebset_confirmation=0 |
||
310 | |||
311 | 6 | lynxis | set ManagedElement=1 userLabel somesite-01 |
312 | 5 | lynxis | |
313 | 6 | lynxis | # create network interface. PortNo defines SFP or Ethernet |
314 | cr Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1 |
||
315 | Attribute 1 of 3, dscpPbitMap (sequence:structRef-DscpPbit): d |
||
316 | Attribute 2 of 3, linkType (enumRef:LinkType): |
||
317 | Enter one of the following integers: 0:FRONT_PORTS, 1:BACKPLANE_PORTS: 0 |
||
318 | Attribute 3 of 3, portNo (long): 2 |
||
319 | 5 | lynxis | |
320 | 6 | lynxis | cr Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1 |
321 | Attribute 1 of 2, networkPrefixLength (long): 24 |
||
322 | Attribute 2 of 2, defaultRouter0 (string): 10.23.0.1 |
||
323 | Following attributes are optional. Enter attribute value or "d" for default. |
||
324 | Once the MO is created, these attributes cannot be changed (they are restricted). |
||
325 | Attribute 1 of 5, ownIpAddressActive (string): d |
||
326 | Attribute 2 of 5, ownIpAddressPassive (string): d |
||
327 | Attribute 3 of 5, rps (boolean): false |
||
328 | Attribute 4 of 5, vlanRef (moRef:ManagedObject): |
||
329 | Enter mo LDN: |
||
330 | Attribute 5 of 5, mtu (long): 1500 |
||
331 | 5 | lynxis | |
332 | 6 | lynxis | # set OAM IP |
333 | cr Ip=1,IpHostLink=1 |
||
334 | Attribute 1 of 1, ipInterfaceMoRef (moRef:ManagedObject): |
||
335 | Enter mo LDN: Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1 |
||
336 | set Ip=1,IpHostLink=1 ipv4Addresses 10.23.0.199 |
||
337 | 5 | lynxis | |
338 | 6 | lynxis | # set eNodeB IP |
339 | cr IpSystem=1,IpAccessHostEt=1 |
||
340 | Attribute 1 of 2, ipAddress (string): 10.23.0.198 |
||
341 | Attribute 2 of 2, ipInterfaceMoRef (moRef:ManagedObject): |
||
342 | Enter mo LDN: Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1 |
||
343 | Following attributes are optional. Enter attribute value or "d" for default. |
||
344 | Once the MO is created, these attributes cannot be changed (they are restricted). |
||
345 | Attribute 1 of 1, networkPrefixLength (long): 24 |
||
346 | 5 | lynxis | |
347 | 6 | lynxis | cr IpSystem=1,IpAccessSctp=1 |
348 | Attribute 1 of 1, ipAccessHostEtRef1 (moRef:IpAccessHostEt): |
||
349 | 5 | lynxis | Enter mo LDN: IpSystem=1,IpAccessHostEt=1 |
350 | |||
351 | 6 | lynxis | |
352 | # ntp settings |
||
353 | accn ManagedElementData createNtpPrimary 10.23.0.2 16 1024 true true |
||
354 | 5 | lynxis | accn ManagedElementData createNtpSecondary 10.23.0.3 16 1024 true true |
355 | 1 | lynxis | |
356 | 8 | lynxis | # optional allow ntp sync for clock ref with low priority |
357 | 6 | lynxis | cr IpSystem=1,IpAccessHostEt=1,IpSyncRef=1 |
358 | Following attributes are optional. Enter attribute value or "d" for default. |
||
359 | Once the MO is created, these attributes cannot be changed (they are restricted). |
||
360 | Attribute 1 of 1, ntpServerIpAddress (string): 10.23.0.2 |
||
361 | 5 | lynxis | |
362 | 6 | lynxis | cr IpSystem=1,IpAccessHostEt=1,IpSyncRef=2 |
363 | Following attributes are optional. Enter attribute value or "d" for default. |
||
364 | Once the MO is created, these attributes cannot be changed (they are restricted). |
||
365 | Attribute 1 of 1, ntpServerIpAddress (string): 10.23.0.3 |
||
366 | accn Synchronization=1 addSyncRefResource IpSystem=1,IpAccessHostEt=1,IpSyncRef=1 3 |
||
367 | accn Synchronization=1 addSyncRefResource IpSystem=1,IpAccessHostEt=1,IpSyncRef=2 4 |
||
368 | deb IpSystem=1,IpAccessHostEt=1,IpSyncRef=1 |
||
369 | 5 | lynxis | deb IpSystem=1,IpAccessHostEt=1,IpSyncRef=2 |
370 | 6 | lynxis | |
371 | # only GPS or external clock can be used. |
||
372 | ## external clock sync (untested). See `mom TuSyncRef` for more info about Tu |
||
373 | # cr Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 |
||
374 | # accn Synchronization=1 addSyncRefResource Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 1 |
||
375 | 1 | lynxis | # deb Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=2 |
376 | 5 | lynxis | |
377 | 8 | lynxis | # gps sync with high priority |
378 | 6 | lynxis | cr Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=2 |
379 | accn Synchronization=1 addSyncRefResource Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=2 2 |
||
380 | deb Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=2 |
||
381 | 5 | lynxis | |
382 | |||
383 | 6 | lynxis | # create sctp nodes |
384 | cr TransportNetwork=1,Sctp=1 |
||
385 | Attribute 1 of 2, numberOfAssociations (long): 10 |
||
386 | Attribute 2 of 2, rpuId (moRef:ReliableProgramUniter): |
||
387 | Enter mo LDN: ReliableProgramUniter=sctp_host |
||
388 | set TransportNetwork=1,Sctp=1 ipAccessSctpRef IpSystem=1,IpAccessSctp=1 |
||
389 | 5 | lynxis | |
390 | 6 | lynxis | # setup ENodeBFunction |
391 | # there might be old values |
||
392 | get ENodeBFunction |
||
393 | 5 | lynxis | |
394 | 6 | lynxis | # part of Cell Global Identity |
395 | set ENodeBFunction=1 eNBId 2342 |
||
396 | set ENodeBFunction=1 sctpRef TransportNetwork=1,Sctp=1 |
||
397 | set ENodeBFunction=1 eNodeBPlmnId mcc=901,mnc=70,mncLength=2 |
||
398 | set ENodeBFunction=1 upIpAccessHostRef IpSystem=1,IpAccessHostEt=1 |
||
399 | 5 | lynxis | |
400 | 6 | lynxis | # s1 link |
401 | cr ENodeBFunction=1,TermPointToMme=1 |
||
402 | # a second ip can be also set or an domainName |
||
403 | set ENodeBFunction=1,TermPointToMme=1 ipAddress1 10.23.0.2 |
||
404 | deb ENodeBFunction=1,TermPointToMme=1 |
||
405 | 5 | lynxis | |
406 | 6 | lynxis | # setup the hardware equipment |
407 | # create a subrack |
||
408 | cr Equipment=1,RbsSubrack=1 |
||
409 | Following attributes are optional. Enter attribute value or "d" for default. |
||
410 | Once the MO is created, these attributes cannot be changed (they are restricted). |
||
411 | Attribute 1 of 1, noOfSlots (long): d |
||
412 | 5 | lynxis | |
413 | 6 | lynxis | # should not be needed, this SwAllocation should be already present |
414 | get SwManagement=1,SwAllocation=RBS_RU |
||
415 | # cr SwManagement=1,SwAllocation=RBS_RU |
||
416 | # accn SwManagement=1,SwAllocation=RBS_RU addRepertoire SwManagement=1,Repertoire=LTE_RBS_RU |
||
417 | 5 | lynxis | |
418 | 6 | lynxis | # the dul needs to support this specific RUS/RRUS. Take a look on the installed RUS/RRUS productNumber |
419 | # in this case KRC11875 |
||
420 | # check if this RUS is supported |
||
421 | lpr KRC11875 |
||
422 | # SwManagement=1,PiuType=KRC11875/1_* |
||
423 | # should return a MO, this MO is required when adding a new antenna setup |
||
424 | cr Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=1 |
||
425 | Attribute 1 of 1, piuType (moRef:PiuType): |
||
426 | Enter mo LDN: PiuType=KRC11875/1_* |
||
427 | 5 | lynxis | |
428 | 6 | lynxis | # connect the RUS Data 1 port to the DUL RiPort A |
429 | set Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=1,RiPort=DATA_1 remoteRiPortRef Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=A |
||
430 | 5 | lynxis | |
431 | 6 | lynxis | # create antennagroup |
432 | cr Equipment=1,AntennaUnitGroup=1 |
||
433 | 5 | lynxis | |
434 | 6 | lynxis | cr Equipment=1,AntennaUnitGroup=1,RfBranch=1 |
435 | Attribute 1 of 2, dlAttenuation (sequence:long): |
||
436 | Enter value or sequence of values, separated by ,: 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 |
||
437 | Attribute 2 of 2, ulAttenuation (sequence:long): |
||
438 | Enter value or sequence of values, separated by ,: 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 |
||
439 | cr Equipment=1,AntennaUnitGroup=1,RfBranch=2 |
||
440 | Attribute 1 of 2, dlAttenuation (sequence:long): |
||
441 | Enter value or sequence of values, separated by ,: 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 |
||
442 | Attribute 2 of 2, ulAttenuation (sequence:long): |
||
443 | Enter value or sequence of values, separated by ,: 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 |
||
444 | cr Equipment=1,AntennaUnitGroup=1,AntennaUnit=1 |
||
445 | 5 | lynxis | |
446 | 6 | lynxis | # connect the Antenna with the RUS |
447 | set Equipment=1,AntennaUnitGroup=1,RfBranch=1 rfPortRef Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=1,DeviceGroup=ru,RfPort=A |
||
448 | set Equipment=1,AntennaUnitGroup=1,RfBranch=2 rfPortRef Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=1,DeviceGroup=ru,RfPort=b |
||
449 | 5 | lynxis | |
450 | 6 | lynxis | # unblock the RUS |
451 | deb Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=1,DeviceGroup=ru,RfPort=A |
||
452 | 5 | lynxis | |
453 | 6 | lynxis | # create sectorequipment function |
454 | cr SectorEquipmentFunction=1 |
||
455 | # on older setup this is in W, on newer this is in mW ### |
||
456 | # use mom SectorEquipmentFunction configuredOutputPower to know it# |
||
457 | set SectorEquipmentFunction=1 confOutputPower 20 |
||
458 | 5 | lynxis | |
459 | 6 | lynxis | # connect Sector Function to the antenna |
460 | set SectorEquipmentFunction rfBranchRef Equipment=1,AntennaUnitGroup=1,RfBranch=1 |
||
461 | 5 | lynxis | |
462 | 6 | lynxis | cr ENodeBFunction=1,SectorCarrier=1 |
463 | Attribute 1 of 1, sectorFunctionRef (moRef:SectorEquipmentFunction): |
||
464 | Enter mo LDN: SectorEquipmentFunction=1 |
||
465 | set ENodeBFunction=1,SectorCarrier=1 noOfRxAntennas 1 |
||
466 | set ENodeBFunction=1,SectorCarrier=1 noOfTxAntennas 1 |
||
467 | 5 | lynxis | |
468 | 6 | lynxis | # create cell |
469 | cr ENodeBFunction=1,EUtranCellFDD=1 |
||
470 | Attribute 1 of 6, earfcndl (long): 300 |
||
471 | Attribute 2 of 6, earfcnul (long): 18300 |
||
472 | Attribute 3 of 6, cellId (long): 1 |
||
473 | Attribute 4 of 6, physicalLayerCellIdGroup (long): 1 |
||
474 | Attribute 5 of 6, physicalLayerSubCellId (long): 1 |
||
475 | Attribute 6 of 6, tac (long): 1 |
||
476 | Following attributes are optional. Enter attribute value or "d" for default. |
||
477 | Once the MO is created, these attributes cannot be changed (they are restricted). |
||
478 | Attribute 1 of 5, sectorCarrierRef (sequence:moRef-SectorCarrier): |
||
479 | Enter LDN, or sequence of LDNs (separated by spaces): ENodeBFunction=1,SectorCarrier=1 |
||
480 | Attribute 2 of 5, dlChannelBandwidth (long): d |
||
481 | Attribute 3 of 5, ulChannelBandwidth (long): d |
||
482 | Attribute 4 of 5, additionalPlmnList (sequence:structRef-PlmnIdentity): d |
||
483 | Attribute 5 of 5, additionalPlmnReservedList (sequence:boolean): |
||
484 | Enter value or sequence of values, separated by ,: d |
||
485 | 5 | lynxis | |
486 | 6 | lynxis | # Check the status of all nodes |
487 | st |
||
488 | # most of the MO should be unlocked and enabled. |
||
489 | # ensure all important nodes are unlocked |
||
490 | ldeb ENodeBFunction=1,EUtranCellFDD=1 |
||
491 | ldeb ENodeBFunction=1,TermPointToMme=1 |
||
492 | ldeb SectorEquipmentFunction=1 |
||
493 | ldeb Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1 |
||
494 | ldeb Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=2 |
||
495 | ldeb Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=1 |
||
496 | 5 | lynxis | |
497 | 6 | lynxis | # finally create a new configuration version otherwise everything is lost after a restart |
498 | cvms singlecell moshell |
||
499 | 5 | lynxis | </pre> |