Project

General

Profile

Actions

NCD 901 60/1 GPS Receiver

The NCD 901 60/1 is a GPS receiver for clock reference purpose, sold as accessory to the RBS6402 eNodeB.

Major internal parts

It consists of the following major parts:

ncd90160_pcba.jpg

External interfaces

ncd90160_edge.jpg

RJ45 conenctor to RBS6402

pin-out and signals are yet TBD, but judging from other Ericsson GPS receivers, it is safe to assume 12V supply and RS485 for NMEA.

SMA connector to GNSS antenna

The SMA connector features a 5V/1W isolated phantom power DC supply

LED

The green LED blinks, when the receiver is powered and goes to constant green when the GPS signal is locked. This could also be checked with issuing:

show ManagedElement=foo,Transport=1,Synchronization=1,RadioEquipmentClock=1,clockState

from the CLI.

When the receiver is locked, the output is:

clockState=LOCKED

while it is

clockState=HOLDOVER

when there is no GPS receiver connected or the device is not locked.

Part Numbers

Part Number Description
NCD 901 60/1 GPS Receiver Unit (with RJ45 and SMA)
RPM 5132372/2900 RBS6402 GPS Cable (RJ45 + proprietary connector)
TSR 432 151/3000 DUS GPS Cable (RJ45 to RJ45)
NTB 801 0070/1 Kit consisting of three items above
Files (3)
ncd90160_pcba.jpg View ncd90160_pcba.jpg 1.29 MB laforge, 10/08/2021 10:37 AM
ncd90160_edge.jpg View ncd90160_edge.jpg 392 KB laforge, 10/08/2021 10:41 AM
ncd90160_bottom.jpg View ncd90160_bottom.jpg 524 KB laforge, 10/08/2021 10:41 AM

Updated by steviehs 2 months ago · 4 revisions

Add picture from clipboard (Maximum size: 48.8 MB)