RBS6402 » History » Revision 3
« Previous |
Revision 3/8
(diff)
| Next »
tnt, 02/18/2020 02:36 PM
RBS6402¶
Contrary to the General/typical RBS6000 family, the RBS6402 is a small cell. It is not modular and doesn't consist of modules like DUL/RUS. It doesn't have any CPRI connections. It can support up to three radio modules and comes in a varity of different LTE bands.
connectors¶
WAN B¶
this is a standard SFP connector, you can use any gigabit ethernet compatible MM or SM SFP module on it
WAN A / PoE¶
Use a LTPoE++ capable 90W PoE injector here
48V¶
This is a standard 3.5mm terminal block. You can e.g. use a Wurth Electronic 691361100002 or "Phoenix contact MC 1,5/2-ST-3,5" :https://octopart.com/1840366-phoenix+contact-6675
Fan¶
The fan connector has two pins with +5V and two pins with GND. You can use a Molex 43025-0408 part to mate it. This is just the housing, you will need crimp contacts and matching crimp tool, or you use pre-crimped wires like Molex 79758-0010.
The two top pins (near the latch) are GND, while the two bottom pins (near the enclosure) are +5V.
Updated by tnt over 4 years ago · 3 revisions