TCU 02 » History » Revision 3
Revision 2 (firs, 12/20/2020 03:53 AM) → Revision 3/5 (firs, 12/20/2020 04:02 AM)
h1. TCU 02 This is basically a [[SIU 02]] re-packaged from 1U into the RBS6000 form-factor. h2. Connectors h3. Power It uses the same connector like e.g. the [[DUL 20]] or [[DUG 20]] units. h3. Console This is an RJ45 Ethernet port. It is configured to a fixed IP address of 192.168.1.1/24 and provides telnet + SSH access. The default user name is @admin@; the default password is @hidden@. You will get access to a command line interface: <pre> Trying 192.168.1.1... Connected to 192.168.1.1. Escape character is '^]'. login: admin Password: STN CLI - ready OSmon> </pre> h3. Clock The external clock port is labeled "GPS", and is now a 8-pin GPS connector similar to the [[DUL 20]] or [[DUS 20]] and as such can connect connects to a [[GPS 02]]. This instead of 10-pin SYNC connector as on the [[SIU 02]]. h3. E1/T1 There are 8 E1/T1 ports, on 4 RJ-45 connectors. Same dual E1/T1 pinout as DAHDI cards. Pinout TODO h3. Transport Network * 4x RJ45 Ethernet * 4x 1G SFP cages for the Transport Network (TN). The ports are combo, ie, you must choose a RJ-45 OR SFP (max 4 TN ports active). h2. Configuration h3. Basic Configuration <pre> # Start Transaction starttransaction trans1 # Hostname setmoattribute trans1 STN=0 stn_name TCU0201-lab # settime Year(1970->) Mon(1-12) Day(1-31) Hour(0-23) Min(0-59) Sec(0-59) Msec(0-999) settime 2020 11 27 19 30 00 000 # Clock input from GPS setmoattribute trans1 STN=0,Synchronization=0 synchType clockInput # Create E1 interface 0 createmo trans1 STN=0,E1T1Interface=0 # Setup E1 port 0 to transmit timing from local src, and do not use any timing received on the line. setmoattribute trans1 STN=0,E1T1Interface=0 type E1 setmoattribute trans1 STN=0,E1T1Interface=0 transmitClockSource localTiming setmoattribute trans1 STN=0,E1T1Interface=0 receiveClockSource notUsed </pre> h3. Transport Network (L2/K3) <pre> # Create Ethernet Interface/L2 createmo trans1 STN=0,EthernetInterface=WAN setmoattribute trans1 STN=0,EthernetInterface=WAN portId TN_A setmoattribute trans1 STN=0,EthernetInterface=WAN mode AUTO # VLAN group for 2G ABISoIP and OAM createmo trans1 STN=0,VLANGroup=WAN setmoattribute trans1 STN=0,VLANGroup=WAN depLinkLayer STN=0,EthernetInterface=WAN # ABISoIP VLAN createmo trans1 STN=0,VLANGroup=WAN,VLAN=2G setmoattribute trans1 STN=0,VLANGroup=WAN,VLAN=2G tagValue 670 setmoattribute trans1 STN=0,VLANGroup=WAN,VLAN=2G tagged true # OAM VLAN createmo trans1 STN=0,VLANGroup=WAN,VLAN=OM setmoattribute trans1 STN=0,VLANGroup=WAN,VLAN=OM tagValue 770 setmoattribute trans1 STN=0,VLANGroup=WAN,VLAN=OM tagged true # IP Interfaces/L3 - ABISoIP createmo trans1 STN=0,IPInterface=2G setmoattribute trans1 STN=0,IPInterface=2G primaryIP_Address 10.245.67.10 setmoattribute trans1 STN=0,IPInterface=2G primarySubNetMask 255.255.255.0 setmoattribute trans1 STN=0,IPInterface=2G depLinkLayer STN=0,VLANGroup=WAN,VLAN=2G setmoattribute trans1 STN=0,IPInterface=2G trustDSCP true # IP Interfaces/L3 - OAM createmo trans1 STN=0,IPInterface=OM setmoattribute trans1 STN=0,IPInterface=OM primaryIP_Address 10.245.77.10 setmoattribute trans1 STN=0,IPInterface=OM primarySubNetMask 255.255.255.0 setmoattribute trans1 STN=0,IPInterface=OM defaultGateway 10.245.77.1 setmoattribute trans1 STN=0,IPInterface=OM depLinkLayer STN=0,VLANGroup=WAN,VLAN=OM setmoattribute trans1 STN=0,IPInterface=OM trustDSCP true setmoattribute trans1 STN=0 depIP_interface stn=0,ipinterface=OM # NTP Server - System Clock setmoattribute trans1 STN=0 systemClockTimeServer 10.1.1.1 setmoattribute trans1 STN=0 systemClockTimeServerType NTP setmoattribute trans1 STN=0 STN_systemClockUDP_Port 123 </pre> h3. ABISoIP Configuration <pre> # Trunk Group IP Transport createmo trans1 STN=0,TGTransport=BTS01-TG01 setmoattribute trans1 STN=0,TGTransport=BTS01-TG01 depIP_interface stn=0,ipinterface=2G setmoattribute trans1 STN=0,TGTransport=BTS01-TG01 pgw_ip_address 10.245.70.15 setmoattribute trans1 STN=0,TGTransport=BTS01-TG01 DSCP_L2TP_CP 48 # Super Channel createmo trans1 STN=0,TGTransport=BTS01-TG01,SuperChannel=0 setmoattribute trans1 STN=0,TGTransport=BTS01-TG01,SuperChannel=0 depE1T1Interface 0 </pre> h3. Optional <pre> # NTP - Possibly for Stratum 0 timing reference? setmoattribute trans1 STN=0,synchronization=0 synchType timeServer setmoattribute trans1 STN=0,synchronization=0 DSCP_synchronization 48 !DSCP for Synchronization! setmoattribute trans1 STN=0,synchronization=0 depIP_interface stn=0,ipinterface=OM createmo trans1 STN=0,synchronization=0,Timeserver=TS1 setmoattribute trans1 STN=0,synchronization=0,Timeserver=TS1 timeServerType NTP setmoattribute trans1 STN=0,synchronization=0,Timeserver=TS1 STN_TS_UDP_Port 123 setmoattribute trans1 STN=0,synchronization=0,Timeserver=TS1 TS_IP_Address 10.1.1.1 setmoattribute trans1 STN=0,synchronization=0,Timeserver=TS1 TS_Priority 1 # Route for ABISoIP interface createmo trans2 STN=0,RoutingTable=0,IPRoute=2G setmoattribute trans1 STN=0,RoutingTable=0,IPRoute=2G forwardingInterface STN=0,IPInterface=2G setmoattribute trans1 STN=0,RoutingTable=0,IPRoute=2G nextHopIpAddress 10.245.67.1 setmoattribute trans1 STN=0,RoutingTable=0,IPRoute=2G destIpSubnet 10.245.70.0/24 setmoattribute trans1 STN=0,RoutingTable=0,IpRoute=2G admDistance 2 </pre> h3. Configuration Commit <pre> # Commit and close checkconsistency trans1 commit trans1 endtransaction trans1 </pre>