Project

General

Profile

GrOsmoSDR » History » Version 45

« Previous - Version 45/95 (diff) - Next » - Current version
horiz0n, 02/19/2016 10:50 PM


PageOutline

= osmocom GnuRadio Blocks =

While primarily being developed for the OsmoSDR hardware, this block as well supports:

By using the OsmoSDR block you can take advantage of a common software api in your application(s) independent of the underlying radio hardware.

Build process

'''The Gnu Radio block requires a recent gnuradio (>= v3.7) to be installed.'''

Before building the block you have to make sure that all the dependencies (see list of supported devices above) you are intend to work with are properly installed. The build system of gr-osmosdr will recognize them and enable specific source/sink components thereafter.

Please note: prior pulling a new version from git and compiling it, please do a "make uninstall" first to properly remove the previous version.

Building with cmake:

{{{
git clone git://git.osmocom.org/gr-osmosdr
cd gr-osmosdr/
mkdir build
cd build/
cmake ../
}}}

Now cmake should print out a summary of enabled/disabled components. You may disable certain components by following guidelines shown by cmake. Make sure the device of your interest is listed here. Check your dependencies and retry otherwise. {{{
-- ######################################################
-- # gr-osmosdr enabled components
-- ######################################################
-- * Python support
-- * Osmocom IQ Imbalance Correction
-- * sysmocom OsmoSDR
-- * FunCube Dongle
-- * IQ File Source
-- * Osmocom RTLSDR
-- * RTLSDR TCP Client
-- * Ettus USRP Devices
-- * Osmocom MiriSDR
-- * HackRF Jawbreaker
--
-- ######################################################
-- # gr-osmosdr disabled components
-- ######################################################
--
-- Building for version: 4c101ea4 / 0.0.1git
-- Using install prefix: /usr/local
}}}

Now build & install {{{
make
sudo make install
sudo ldconfig
}}}

NOTE: The osmocom source/sink blocks will appear under 'Sources' and 'Sinks' categories in GRC menu.

To build the API documentation: {{{
cd build/
cmake ../ -DENABLE_DOXYGEN=1
make -C docs
}}}

http://bgamari.github.io/posts/2013-06-15-hackrf.html

Automated installation

Marcus D. Leech has kindly integrated the forementioned build steps into his gnuradio installation script at [http://www.sbrac.org/files/build-gnuradio]. This is the most user-friendly option so far.

Device specification
You can specify the source or sink device using a comma separated string of argument=value pairs. The always-up-to-date block documentation with examples is available [http://cgit.osmocom.org/gr-osmosdr/tree/grc/gen_osmosdr_blocks.py#n100 right here]. === FCD Source ===
Argument Notes
fcd=<device-index> 0-based device identifier
=== OsmoSDR Source ===
Argument Notes
osmosdr=<device-index> 0-based device identifier
buffers=<number-of-buffers> Default is 32
buflen=<length-of-buffer> Default is 256kB, must be multiple of 512
=== RTL-SDR Source ===
Argument Notes
rtl=<device-index> 0-based device identifier OR serial number
rtl_xtal=<frequency> Frequency (Hz) used for the RTL chip, accepts eng notation
tuner_xtal=<frequency> Frequency (Hz) used for the tuner chip, accepts eng notation
buffers=<number-of-buffers> Default is 32
buflen=<length-of-buffer> Default is 256kB, must be multiple of 512
direct_samp=0 1 2 Enable direct sampling mode on the RTL chip. 0: Disable, 1: use I channel, 2: use Q channel
offset_tune=0 1 Enable offset tune mode for E4000 tuners

NOTE: use rtl_eeprom -s to program your own serial number to the device

NOTE: if you don't specify rtl_xtal/tuner_xtal, the underlying driver will use 28.0MHz

=== RTL-SDR TCP Source ===
Argument Notes
rtl_tcp=<hostname>:<port> hostname defaults to "localhost", port to "1234"
psize=<payload-size> Default is 16384 bytes
direct_samp=0 1 2 Enable direct sampling mode on the RTL chip 0=Off, 1=I-ADC input enabled, 2=Q-ADC input enabled
offset_tune=0 1 Enable offset tune mode for E4000 tuners
=== Miri Source ===
Argument Notes
miri=<device-index> 0-based device identifier
buffers=<number-of-buffers> Default is 32

NOTE: if you don't specify rtl_xtal/tuner_xtal, the underlying driver will use 28.0MHz

=== UHD Source / Sink ===
Argument Notes
uhd Use this argument without a value
nchan=<channel-count> For multichannel USRP configurations use the subdev parameter to specify stream mapping
subdev=<subdev-spec> Examples: "A:0", "B:0", "A:0 B:0" when nchan=2. Refer original ettus documentation on this
lo_offset=<frequency> Offset frequency in Hz, must be within daughterboard bandwidth. Accepts eng notation

Additional argument/value pairs will be passed to the underlying driver, for more information see
[http://files.ettus.com/uhd_docs/manual/html/general.html#specifying-the-subdevice-to-use specifying the subdevice] and
[http://files.ettus.com/uhd_docs/manual/html/identification.html#common-device-identifiers common device identifiers] in the Ettus documentation.

=== HackRF Source / Sink ===
Argument Notes
hackrf Use this argument without a value
buffers=<number-of-buffers> Default is 32

Only the first device found may be used at the moment because of libhackrf limitation.

Transmit support has been verified by using the [http://sdr.osmocom.org/trac/attachment/wiki/GrOsmoSDR/hackrf-dab.jpg crc-mmbTools DAB sdr transmitter].

=== IQ File Source ===
Argument Notes
file=<path-to-file-name>
freq=<frequency> Center frequency in Hz, accepts eng notation
rate=<sampling-rate> Mandatory, in samples/s, accepts eng notation
repeat=true false Default is true
throttle=true false Throttle flow of samples, default is true
Included Apps

=== Spectrum Browser ===

Image(fft-lte.png)

usage examples: {{{
osmocom_fft -a rtl=0 -v -f 100e6 -s 2.4e6 -g 15
osmocom_fft -a hackrf -v
osmocom_fft -a uhd -v
}}} === Signal generator ===

Image(siggen-gsm.png)

usage examples: {{{
osmocom_siggen -a hackrf -s 5e6 -f 100e6 --sine
osmocom_siggen -a hackrf -s 5e6 -f 100e6 --sweep -x 2M -y 1 -c34
osmocom_siggen_nogui -a hackrf -f 100e6 --sweep -x 2e6 -y 10 -v
osmocom_siggen_nogui -a uhd,subdev=A:0 -f 100e6 --sweep -x 2e6 -y 10 -s 4e6 -v
}}} === Spectrum sensing ===

TODO: document

Known Apps

The following 3rd party applications are successfully using gr-osmosdr:

'''Name''' '''Type''' '''Author''' '''URL'''
gr-pocsag GRC Flowgraph Marcus Leech [https://www.cgran.org/browser/projects/gr-pocsag/trunk]
multimode RX GRC Flowgraph Marcus Leech [https://www.cgran.org/browser/projects/multimode/trunk]
simple_fm_rvc GRC Flowgraph Marcus Leech [https://www.cgran.org/browser/projects/simple_fm_rcv/trunk]
Wireless Temp. Sensor RX Gnuradio App Kevin Mehall [https://github.com/kevinmehall/rtlsdr-433m-sensor]
gqrx SDR GUI Alexandru Csete [https://github.com/csete/gqrx]
tetra_demod_fft Trunking RX osmocom team [http://cgit.osmocom.org/cgit/osmo-tetra/tree/src/demod/python/osmosdr-tetra_demod_fft.py osmosdr-tetra_demod_fft.py] and the [http://tetra.osmocom.org/trac/wiki/osmo-tetra#Quickexample HOWTO]
airprobe GSM sniffer osmocom team et al [http://git.gnumonks.org/cgi-bin/gitweb.cgi?p=airprobe.git]
gr-smartnet (WIP) Trunking RX Nick Foster [br[http://www.reddit.com/r/RTLSDR/comments/vbxl0/attention_grsmartnet_users_or_attempted_users/">http://www.reddit.com/r/RTLSDR/comments/us3yo/rtlsdr_smartnet/]br[http://www.reddit.com/r/RTLSDR/comments/vbxl0/attention_grsmartnet_users_or_attempted_users/ Notes from the author]
gr-air-modes ADS-B RX Nick Foster [https://www.cgran.org/wiki/gr-air-modes] call with --rtlsdr option
gr-ais (fork) AIS RX Nick FosterbrAntoine SirinellibrChristian Gagneraud [https://github.com/chgans/gr-ais]
GNSS-SDR GPS RX (Realtime!) Centre Tecnològic debrTelecomunicacions de Catalunya [http://www.gnss-sdr.org/documentation/gnss-sdr-operation-realtek-rtl2832u-usb-dongle-dvb-t-receiver Documentation] and [http://www.gnss-sdr.org]
gr-scan Scanner techmeology [http://www.techmeology.co.uk/gr-scan/]
pocsag-mrt Multichannel RealtimebrDecoder iZsh [https://github.com/iZsh/pocsag-mrt]
osmo-gmr-rtl GMR1 RX Dimitri Stolnikov [http://gmr.osmocom.org/trac/wiki/GettingStarted#RTLSDRdongles]
simple_ra '''(NEW)''' Radio Astronomy App Marcus Leech [https://cgran.org/wiki/simple_ra]
FS20_decode '''(NEW)''' FS20 Decoder Thomas Frisch [https://github.com/eT0M/rtl_sdr_FS20_decoder]
OpenLTE '''(NEW)''' LTE Toolkit Ben Wojtowicz [http://sourceforge.net/p/openlte/home/Home/]
Credits

gr-osmosdr is developed by Dimitri Stolnikov with contributions from Hoernchen and Steve Markgraf.

Add picture from clipboard (Maximum size: 48.8 MB)