Project

General

Profile

GrOsmoSDR » History » Version 86

jynik, 02/19/2016 10:50 PM
Touched up bladeRF xb200 filter info and gain mappings

1 1 horiz0n
[[PageOutline]]
2 1 horiz0n
3 47 horiz0n
= osmocom Gnu Radio Blocks =
4 1 horiz0n
5 20 horiz0n
While primarily being developed for the OsmoSDR hardware, this block as well supports:
6 1 horiz0n
7 20 horiz0n
 * [http://tetra.osmocom.org/trac/wiki/Funcube_Dongle FunCube Dongle] through libgnuradio-fcd
8 50 horiz0n
 * [http://www.funcubedongle.com/?page_id=1073 FUNcube Dongle Pro+] through [https://github.com/dl1ksv/gr-fcdproplus gr-fcdproplus]
9 44 horiz0n
 * [http://sdr.osmocom.org/trac/ sysmocom OsmoSDR] Devices through [http://cgit.osmocom.org/osmo-sdr/ libosmosdr]
10 51 horiz0n
 * [http://nuand.com/ Nuand LLC bladeRF] through [https://github.com/Nuand/bladeRF libbladeRF library]
11 20 horiz0n
 * [http://greatscottgadgets.com/hackrf/ Great Scott Gadgets HackRF] through [https://github.com/mossmann/hackrf libhackrf]
12 77 sylvain
 * [http://www.ettus.com/product Ettus USRP] Devices through [http://files.ettus.com/manual/page_identification.html Ettus UHD library]
13 56 horiz0n
 * [http://umtrx.org Fairwaves UmTRX] through [https://github.com/fairwaves/UHD-Fairwaves Fairwaves' fork of Ettus' UHD library]
14 61 horiz0n
 * RFSPACE [http://www.rfspace.com/RFSPACE/SDR-IQ.html SDR-IQ], [http://www.rfspace.com/RFSPACE/SDR-IP.html SDR-IP], [http://rfspace.com/RFSPACE/NetSDR.html NetSDR] [http://www.rfspace.com/RFSPACE/NetSDR-X2.html (incl. X2 option)]
15 20 horiz0n
 * RTL2832U based DVB-T dongles through [http://sdr.osmocom.org/trac/wiki/rtl-sdr librtlsdr]
16 20 horiz0n
 * RTL-TCP spectrum server (see librtlsdr project)
17 20 horiz0n
 * MSi2500 based DVB-T dongles through [http://cgit.osmocom.org/libmirisdr/ libmirisdr]
18 81 horiz0n
 * [http://www.sdrplay.com SDRplay RSP] through [http://www.sdrplay.com/api_drivers.html SDRplay API library]
19 69 horiz0n
 * [http://www.airspy.com/ AirSpy R820t] dongles through [https://github.com/airspy/host libairspy]
20 42 horiz0n
 * gnuradio .cfile input through libgnuradio-blocks
21 20 horiz0n
22 20 horiz0n
By using the OsmoSDR block you can take advantage of a common software api in your application(s) independent of the underlying radio hardware.
23 20 horiz0n
24 1 horiz0n
== Build process ==
25 1 horiz0n
26 48 horiz0n
'''The Gnu Radio block requires a recent gnuradio (>= v3.7 if building master branch or 3.6.5 when building gr3.6 branch) to be installed.'''
27 20 horiz0n
28 43 horiz0n
Before building the block you have to make sure that all the dependencies (see list of supported devices above) you are intend to work with are properly installed. The build system of gr-osmosdr will recognize them and enable specific source/sink components thereafter.
29 1 horiz0n
30 1 horiz0n
Please note: prior pulling a new version from git and compiling it, please do a "make uninstall" first to properly remove the previous version.
31 1 horiz0n
32 1 horiz0n
Building with cmake:
33 30 horiz0n
34 1 horiz0n
{{{
35 1 horiz0n
git clone git://git.osmocom.org/gr-osmosdr
36 1 horiz0n
cd gr-osmosdr/
37 48 horiz0n
}}}
38 48 horiz0n
39 48 horiz0n
If you are building for gnuradio 3.6 series, you have to switch to the gr3.6 branch as follows
40 48 horiz0n
{{{
41 48 horiz0n
git checkout gr3.6
42 48 horiz0n
}}}
43 48 horiz0n
44 51 horiz0n
then continue with
45 48 horiz0n
{{{
46 1 horiz0n
mkdir build
47 1 horiz0n
cd build/
48 14 horiz0n
cmake ../
49 30 horiz0n
}}}
50 30 horiz0n
51 34 horiz0n
Now cmake should print out a summary of enabled/disabled components. You may disable certain components by following guidelines shown by cmake. Make sure the device of your interest is listed here. Check your dependencies and retry otherwise.
52 30 horiz0n
{{{
53 30 horiz0n
-- ######################################################
54 30 horiz0n
-- # gr-osmosdr enabled components                         
55 30 horiz0n
-- ######################################################
56 30 horiz0n
--   * Python support
57 30 horiz0n
--   * Osmocom IQ Imbalance Correction
58 1 horiz0n
--   * sysmocom OsmoSDR
59 51 horiz0n
--   * FUNcube Dongle
60 51 horiz0n
--   * FUNcube Dongle Pro+
61 30 horiz0n
--   * IQ File Source
62 30 horiz0n
--   * Osmocom RTLSDR
63 30 horiz0n
--   * RTLSDR TCP Client
64 30 horiz0n
--   * Ettus USRP Devices
65 30 horiz0n
--   * Osmocom MiriSDR
66 1 horiz0n
--   * HackRF Jawbreaker
67 51 horiz0n
--   * nuand bladeRF
68 61 horiz0n
--   * RFSPACE Receivers
69 30 horiz0n
-- 
70 30 horiz0n
-- ######################################################
71 30 horiz0n
-- # gr-osmosdr disabled components                        
72 1 horiz0n
-- ######################################################
73 30 horiz0n
-- 
74 51 horiz0n
-- Building for version: v0.1.0-4-g37aba331 / 0.1.1git
75 30 horiz0n
-- Using install prefix: /usr/local
76 30 horiz0n
}}}
77 30 horiz0n
78 30 horiz0n
Now build & install
79 30 horiz0n
{{{
80 1 horiz0n
make
81 1 horiz0n
sudo make install
82 1 horiz0n
sudo ldconfig
83 1 horiz0n
}}}
84 1 horiz0n
85 44 horiz0n
NOTE: The osmocom source/sink blocks will appear under 'Sources' and 'Sinks' categories in GRC menu.
86 1 horiz0n
87 10 chris
To build the API documentation:
88 10 chris
{{{
89 10 chris
cd build/
90 1 horiz0n
cmake ../ -DENABLE_DOXYGEN=1
91 1 horiz0n
make -C docs
92 14 horiz0n
}}}
93 44 horiz0n
94 1 horiz0n
== Automated installation ==
95 1 horiz0n
96 1 horiz0n
Marcus D. Leech has kindly integrated the forementioned build steps into his gnuradio installation script at [http://www.sbrac.org/files/build-gnuradio]. This is the most user-friendly option so far.
97 7 horiz0n
98 11 chris
== Device specification ==
99 33 horiz0n
You can specify the source or sink device using a comma separated string of argument=value pairs. The always-up-to-date block documentation with examples is available [http://cgit.osmocom.org/gr-osmosdr/tree/grc/gen_osmosdr_blocks.py#n100 right here].
100 19 horiz0n
101 18 horiz0n
=== FCD Source ===
102 18 horiz0n
||Argument||Notes||
103 54 horiz0n
||fcd=<device-index>|| 0-based device identifier, optional||
104 54 horiz0n
||device=hw:2|| overrides the audio device||
105 54 horiz0n
||type=2|| selects the dongle type, 1 for Classic, 2 for Pro+||
106 50 horiz0n
107 50 horiz0n
The "device" argument overrides the audio device used by the underlying driver to access the dongle's IQ sample stream.
108 50 horiz0n
109 50 horiz0n
The "type" argument selects the dongle type, 1 for Classic, 2 for Pro+.
110 18 horiz0n
111 58 horiz0n
=== IQ File Source ===
112 58 horiz0n
||Argument||Notes||
113 58 horiz0n
||file=<path-to-file-name>||||
114 76 horiz0n
||freq=<frequency>|| Center frequency in Hz, accepts scientific notation||
115 76 horiz0n
||rate=<sampling-rate>|| Mandatory, in samples/s, accepts scientific notation||
116 58 horiz0n
||repeat=true|false|| Default is true||
117 58 horiz0n
||throttle=true|false|| Throttle flow of samples, default is true||
118 58 horiz0n
119 1 horiz0n
=== OsmoSDR Source ===
120 28 horiz0n
||Argument||Notes||
121 28 horiz0n
||osmosdr=<device-index>|| 0-based device identifier||
122 1 horiz0n
||buffers=<number-of-buffers>|| Default is 32||
123 28 horiz0n
||buflen=<length-of-buffer>|| Default is 256kB, must be multiple of 512||
124 1 horiz0n
125 11 chris
=== RTL-SDR Source ===
126 28 horiz0n
||Argument||Notes||
127 28 horiz0n
||rtl=<device-index>|| 0-based device identifier OR serial number||
128 76 horiz0n
||rtl_xtal=<frequency>|| Frequency (Hz) used for the RTL chip, accepts scientific notation||
129 76 horiz0n
||tuner_xtal=<frequency>|| Frequency (Hz) used for the tuner chip, accepts scientific notation||
130 1 horiz0n
||buffers=<number-of-buffers>|| Default is 32||
131 28 horiz0n
||buflen=<length-of-buffer>|| Default is 256kB, must be multiple of 512||
132 29 horiz0n
||direct_samp=0|1|2|| Enable direct sampling mode on the RTL chip. 0: Disable, 1: use I channel, 2: use Q channel||
133 29 horiz0n
||offset_tune=0|1|| Enable offset tune mode for E4000 tuners||
134 28 horiz0n
135 28 horiz0n
NOTE: use rtl_eeprom -s to program your own serial number to the device
136 32 horiz0n
137 11 chris
NOTE: if you don't specify rtl_xtal/tuner_xtal, the underlying driver will use 28.0MHz
138 1 horiz0n
139 1 horiz0n
=== RTL-SDR TCP Source ===
140 28 horiz0n
||Argument||Notes||
141 1 horiz0n
||rtl_tcp=<hostname>:<port>|| hostname defaults to "localhost", port to "1234"||
142 1 horiz0n
||psize=<payload-size>|| Default is 16384 bytes||
143 29 horiz0n
||direct_samp=0|1|2|| Enable direct sampling mode on the RTL chip 0=Off, 1=I-ADC input enabled, 2=Q-ADC input enabled||
144 29 horiz0n
||offset_tune=0|1|| Enable offset tune mode for E4000 tuners||
145 1 horiz0n
146 28 horiz0n
=== Miri Source ===
147 28 horiz0n
||Argument||Notes||
148 28 horiz0n
||miri=<device-index>|| 0-based device identifier||
149 28 horiz0n
||buffers=<number-of-buffers>|| Default is 32||
150 28 horiz0n
151 80 horiz0n
=== SDRplay Source ===
152 80 horiz0n
153 80 horiz0n
The sdrplay source uses a precompiled (closed source) library available from http://www.sdrplay.com/api_drivers.html to interface with the hardware. To enable this nonfree driver you have to call cmake with the additional parameter -DENABLE_NONFREE=TRUE
154 80 horiz0n
155 80 horiz0n
||sdrplay|| Use this argument without a value||
156 80 horiz0n
157 1 horiz0n
=== UHD Source / Sink ===
158 28 horiz0n
||Argument||Notes||
159 28 horiz0n
||uhd|| Use this argument without a value||
160 28 horiz0n
||nchan=<channel-count>|| For multichannel USRP configurations use the subdev parameter to specify stream mapping||
161 28 horiz0n
||subdev=<subdev-spec>|| Examples: "A:0", "B:0", "A:0 B:0" when nchan=2. Refer original ettus documentation on this||
162 76 horiz0n
||lo_offset=<frequency>|| Offset frequency in Hz, must be within daughterboard bandwidth. Accepts scientific notation||
163 1 horiz0n
164 1 horiz0n
Additional argument/value pairs will be passed to the underlying driver, for more information see
165 1 horiz0n
[http://files.ettus.com/uhd_docs/manual/html/general.html#specifying-the-subdevice-to-use specifying the subdevice] and 
166 1 horiz0n
[http://files.ettus.com/uhd_docs/manual/html/identification.html#common-device-identifiers common device identifiers] in the Ettus documentation.
167 54 horiz0n
168 54 horiz0n
=== bladeRF Source / Sink ===
169 71 horiz0n
Arguments that affect both the source & sink (i.e., the underlying device), when applied to either are marked '''bold'''.
170 71 horiz0n
171 1 horiz0n
||Argument||Notes||
172 85 jynik
||bladerf[=instance|serial]||Selects the specified bladeRF device by a 0-indexed "device instance" count or by the device's serial number. 3 or more characters from the serial number are required. If 'instance' or 'serial' are not specified, the first available device is used. ||
173 71 horiz0n
||'''fpga'''=<'/path/to/the/bitstream.rbf'>||Load the FPGA bitstream from the specified file. This is required only once after powering the bladeRF on. If the FPGA is already loaded, this argument is ignored, unless 'fpga-reload=1' is specified.||
174 71 horiz0n
||'''fpga-reload'''=1||Force the FPGA to be reloaded. Requires fpga=<bitrstream> to be provided to have any effect.||
175 71 horiz0n
||buffers=<count>||Number of sample buffers to use. Increasing this value may alleviate transient timeouts, with the trade-off of added latency. This must be greater than the 'transfers' parameter. Default=32||
176 71 horiz0n
||buflen=<count>||Length of a sample buffer, in *samples* (not bytes). This must be a multiple of 1024. Default=4096||
177 71 horiz0n
||transfers=<count>||Number of in-flight sample buffer transfers. Defaults to one half of the 'buffers' count.||
178 71 horiz0n
||stream_timeout_ms=<timeout>||Specifies the timeout for the underlying sample stream. Default=3000.||
179 75 horiz0n
||'''loopback'''=<mode>||Configure the device for the specified loopback mode (disabled, baseband, or RF). See the libbladeRF documentation for descriptions of these available options: none, bb_txlpf_rxvga2, bb_txlpf_rxlpf, bb_txvga1_rxvga2, bb_txvga1_rxlpf, rf_lna1, rf_lna2, rf_lna3. The default mode is 'none'.
180 71 horiz0n
||'''verbosity'''=<level>||Controls the verbosity of output written to stderr from libbladeRF. The available options, from least to most verbose are: silent, critical, error, warning, info, debug, verbose. The default level is determined by libbladeRF.||
181 86 jynik
||'''xb200'''[=filter]||Automatic filter selection will be enabled if no value is given to the xb200 parameter. Otherwise, a specific filter may be selected per the list presented below.||
182 72 horiz0n
183 78 horiz0n
184 78 horiz0n
{{{
185 72 horiz0n
The following values are valid for the xb200 parameter:
186 73 horiz0n
"custom"  : custom band
187 73 horiz0n
"50M"     :  50MHz band
188 73 horiz0n
"144M"    : 144MHz band
189 73 horiz0n
"222M"    : 222MHz band
190 73 horiz0n
"auto3db" : Select fiterbank based on -3dB filter points
191 73 horiz0n
"auto"    : Select filerbank based on -1dB filter points (default)
192 78 horiz0n
193 78 horiz0n
194 86 jynik
gr-osmosdr <-> bladeRF gain mappings
195 78 horiz0n
196 78 horiz0n
Sink:
197 86 jynik
BB Gain: TX VGA1 [-35, -4]
198 78 horiz0n
IF Gain: N/A
199 86 jynik
RF Gain: TX VGA2 [0, 25]
200 78 horiz0n
201 78 horiz0n
Source:
202 86 jynik
RF Gain: LNA Gain {0, 3, 6}
203 78 horiz0n
IF Gain: N/A
204 86 jynik
BB Gain: : RX VGA1 + RX VGA2 [5, 60]
205 78 horiz0n
}}}
206 78 horiz0n
207 28 horiz0n
208 38 horiz0n
=== HackRF Source / Sink ===
209 38 horiz0n
||Argument||Notes||
210 82 horiz0n
||hackrf=<device-index>|| 0-based device identifier OR serial number||
211 84 horiz0n
||bias=0|1|| Disable or enable antenna bias voltage in receive mode (source)||
212 83 horiz0n
||bias_tx=0|1|| Disable or enable antenna bias voltage in transmit mode (sink)||
213 1 horiz0n
||buffers=<number-of-buffers>|| Default is 32||
214 1 horiz0n
215 82 horiz0n
You can specify either hackrf=0 and hackrf=1 to select by a device index, or the serial number (or an unique suffix of a serial number), hackrf=f00d and hackrf=1234abba. hackrf_info lists multiple devices and their serial numbers. Device selection by serial number tail ("hackrf=beeff00d") requires updated hackrf firmware. The firmware changes have been in the hackrf git master, but there's no official firmware binary published yet (02.06.2015).
216 82 horiz0n
217 82 horiz0n
Beware of a little catch, there are some examples floating on the net with "hackrf=1" as the device argument. Device index numbers are 0-based (like with rtlsdr and other drivers), so you'll have to use hackrf=0 if you only have a single device attached, hackrf=1 would be the second device. Before this patch the hackrf gr-osmosdr driver did not care about the parameter at all.
218 28 horiz0n
219 1 horiz0n
Transmit support has been verified by using the [http://sdr.osmocom.org/trac/attachment/wiki/GrOsmoSDR/hackrf-dab.jpg crc-mmbTools DAB sdr transmitter].
220 61 horiz0n
221 1 horiz0n
=== RFSPACE Source ===
222 61 horiz0n
||Argument||Notes||
223 63 horiz0n
||sdr-iq[=<serial-port>]|| Optional parameter, serial-port defaults to the serial port (like /dev/ttyUSB0) used by first detected SDR-IQ||
224 63 horiz0n
||sdr-ip[=<hostname>][:<port>]|| Optional parameters, hostname defaults to "localhost", port to "50000" or the first detected SDR-IP||
225 61 horiz0n
||netsdr[=<hostname>][:<port>]|| Optional parameters, hostname defaults to "localhost", port to "50000" or the first detected NetSDR||
226 7 horiz0n
||nchan=<channel-count>|| Optional parameter for NetSDR, must be 1 or 2||
227 63 horiz0n
228 58 horiz0n
The SDR-IP/NetSDR discovery protocol (UDP broadcast) is implemented, thus specifying the ip & port should not be neccessary. Note: for the receiver to operate properly it is required that the UDP packets (port 50000) carrying the sample data can reach your PC, therefore configure your firewall/router/etc. accordingly...
229 64 horiz0n
230 64 horiz0n
The ftdi_sio driver is being used for SDR-IQ. It creates a character device of the form:
231 64 horiz0n
232 64 horiz0n
crw-rw---- 1 root dialout 188, 0 Dec 19 22:14 /dev/ttyUSB0
233 64 horiz0n
234 64 horiz0n
To be able to open the device without root permissions add yourself to the "dialout" group or do a "chmod 666 /dev/ttyUSB0" after pluggin in.
235 70 horiz0n
236 70 horiz0n
=== AirSpy Source ===
237 70 horiz0n
238 70 horiz0n
||airspy|| Use this argument without a value||
239 80 horiz0n
||bias=1|0|| Enable or disable DC bias at the antenna input||
240 35 horiz0n
241 35 horiz0n
== Included Apps ==
242 35 horiz0n
243 45 horiz0n
=== Spectrum Browser ===
244 45 horiz0n
245 57 horiz0n
[[Image(fft-lte.png)]]
246 58 horiz0n
247 57 horiz0n
RTSA-like spectrum visualization is available through [https://sdr.osmocom.org/trac/wiki/fosphor fosphor] component. Call osmocom_fft with -F switch to enable it (a graphics card supporting OpenCL/OpenGL interop is a requirement).
248 57 horiz0n
249 57 horiz0n
[[Image(fosphor.png)]]
250 57 horiz0n
251 35 horiz0n
[[Image(fosphor2.png)]]
252 36 horiz0n
253 35 horiz0n
usage examples:
254 1 horiz0n
{{{
255 66 horiz0n
osmocom_fft -a rtl=0 -v -f 100e6 -s 2.4e6 -g 15
256 66 horiz0n
osmocom_fft -a rfspace -v
257 35 horiz0n
osmocom_fft -a bladerf -v
258 36 horiz0n
osmocom_fft -a hackrf -v
259 69 horiz0n
osmocom_fft -a uhd -v
260 35 horiz0n
osmocom_fft -a airspy -v
261 67 horiz0n
}}}
262 67 horiz0n
263 67 horiz0n
DC offset and IQ imbalance correction controls may be enabled using --dc-offset-mode=0 and --iq-balance-mode=0 command line switches respectively.
264 1 horiz0n
265 45 horiz0n
=== Signal generator ===
266 65 horiz0n
267 35 horiz0n
[[Image(siggen-gsm.png)]]   [[Image(gsm-hackrf-8M.png, 500px)]]
268 36 horiz0n
269 49 horiz0n
usage examples:
270 49 horiz0n
{{{
271 39 horiz0n
osmocom_siggen -a hackrf -f 100e6 --sine
272 39 horiz0n
osmocom_siggen -a hackrf -f 100e6 --sweep -x 2M -y 1 -c34
273 36 horiz0n
osmocom_siggen_nogui -a hackrf -f 100e6 --sweep -x 2e6 -y 10 -v
274 67 horiz0n
osmocom_siggen_nogui -a uhd,subdev=A:0 -f 100e6 --sweep -x 2e6 -y 10 -s 4e6 -v
275 35 horiz0n
osmocom_siggen -a bladerf -f 1G --sweep -x 4M -y 1 -s 4M
276 35 horiz0n
}}}
277 35 horiz0n
=== Spectrum sensing ===
278 35 horiz0n
279 7 horiz0n
TODO: document
280 7 horiz0n
281 7 horiz0n
== Known Apps ==
282 7 horiz0n
283 7 horiz0n
The following 3rd party applications are successfully using gr-osmosdr:
284 7 horiz0n
285 15 horiz0n
||'''Name'''||'''Type'''||'''Author'''||'''URL'''||
286 8 horiz0n
||gr-pocsag||GRC Flowgraph||Marcus Leech||[https://www.cgran.org/browser/projects/gr-pocsag/trunk]||
287 16 horiz0n
||multimode RX||GRC Flowgraph||Marcus Leech||[https://www.cgran.org/browser/projects/multimode/trunk]||
288 1 horiz0n
||simple_fm_rvc||GRC Flowgraph||Marcus Leech||[https://www.cgran.org/browser/projects/simple_fm_rcv/trunk]||
289 1 horiz0n
||Wireless Temp. Sensor RX||Gnuradio App||Kevin Mehall||[https://github.com/kevinmehall/rtlsdr-433m-sensor]||
290 1 horiz0n
||gqrx||SDR GUI||Alexandru Csete||[https://github.com/csete/gqrx]||
291 1 horiz0n
||tetra_demod_fft||Trunking RX||osmocom team||[http://cgit.osmocom.org/cgit/osmo-tetra/tree/src/demod/python/osmosdr-tetra_demod_fft.py osmosdr-tetra_demod_fft.py] and the [http://tetra.osmocom.org/trac/wiki/osmo-tetra#Quickexample HOWTO] ||
292 1 horiz0n
||airprobe||GSM sniffer||osmocom team et al||[http://git.gnumonks.org/cgi-bin/gitweb.cgi?p=airprobe.git]||
293 16 horiz0n
||gr-smartnet (WIP)||Trunking RX||Nick Foster||[http://www.reddit.com/r/RTLSDR/comments/us3yo/rtlsdr_smartnet/][[br]][http://www.reddit.com/r/RTLSDR/comments/vbxl0/attention_grsmartnet_users_or_attempted_users/ Notes from the author]||
294 16 horiz0n
||gr-air-modes||ADS-B RX||Nick Foster||[https://www.cgran.org/wiki/gr-air-modes] call with --rtlsdr option||
295 15 horiz0n
||gr-ais (fork)||AIS RX||Nick Foster[[br]]Antoine Sirinelli[[br]]Christian Gagneraud||[https://github.com/chgans/gr-ais]||
296 15 horiz0n
||GNSS-SDR ||GPS RX (Realtime!)||Centre Tecnològic de[[br]]Telecomunicacions de Catalunya||[http://www.gnss-sdr.org/documentation/gnss-sdr-operation-realtek-rtl2832u-usb-dongle-dvb-t-receiver Documentation] and [http://www.gnss-sdr.org]||
297 15 horiz0n
||gr-scan ||Scanner||techmeology||[http://www.techmeology.co.uk/gr-scan/]||
298 15 horiz0n
||pocsag-mrt||Multichannel Realtime[[br]]Decoder||iZsh||[https://github.com/iZsh/pocsag-mrt]||
299 68 horiz0n
||osmo-gmr-rtl||GMR1 RX||Dimitri Stolnikov||[http://gmr.osmocom.org/trac/wiki/GettingStarted#RTLSDRdongles]||
300 68 horiz0n
||simple_ra||Radio Astronomy App||Marcus Leech||[https://cgran.org/wiki/simple_ra]||
301 1 horiz0n
||FS20_decode||FS20 Decoder||Thomas Frisch||[https://github.com/eT0M/rtl_sdr_FS20_decoder]||
302 56 horiz0n
||OpenLTE '''(NEW)'''||LTE Toolkit||Ben Wojtowicz||[http://sourceforge.net/p/openlte/home/Home/]||
303 68 horiz0n
||sdrangelove '''(NEW)'''||SDR GUI||Christian Daniel||[http://sdrangelove.org]||
304 28 horiz0n
||gr-dvbt '''(NEW)'''||DVB-T Transmitter & Receiver||Bogdan Diaconescu||[https://github.com/BogdanDIA/gr-dvbt] [http://yo3iiu.ro/blog/?p=1191 Blog Post] [http://nuand.com/forums/viewtopic.php?f=8&t=3499#p5124 bladeRF transmit flowgraph]||
305 28 horiz0n
306 53 horiz0n
== Credits ==
307 59 horiz0n
308 1 horiz0n
gr-osmosdr is developed by Dimitri Stolnikov with contributions from Hoernchen, Steve Markgraf, Sylvain Munaut and Nuand LLC folks.
Add picture from clipboard (Maximum size: 48.8 MB)