Wiki » History » Revision 2
Revision 1 (laforge, 11/25/2016 04:20 PM) → Revision 2/10 (laforge, 11/25/2016 09:04 PM)
h1. multi-voltage dual USB UART This is a CP2105 based dual-port USB UART. As a very special feature, this device allows you to manually select the UART voltage levels to 1.8, 2.3, 2.5, 2.8, 3.0 or 3.3 Volts. It is thus ideal for a lab environment, where you frequently need to interconnect with various embedded electronics devices that have UARTs at unusual voltages. Both UART ports feature RxD/TxD/RTS/CTS signals and have TVS diodes for ESD protection. Miscellaneous CP2105 GPIOs are available on a separate header h2. Pictures !mv-uart-front.jpg! !mv-uart-back.jpg! h2. Design Files / Schematics / Layour The EAGLE design files for this open hardware project are available in the @osmocom-small-hardware.git@ repository and can be checked out using @git clone git://git.osmocom.org/osmo-small-hardware.git@. PDF renderings of schematics and component placement are attached below. !mv-uart.png! h2. Availability A fully assembled circuit board can be obtained from http://shop.sysmocom.de/products/multi-voltage-usb-dual-uart