Project

General

Profile

Wiki » History » Version 1

laforge, 08/31/2019 05:08 PM

1 1 laforge
h1. m.2 (NGFF) WWAN modem USB breakout board
2 1 laforge
3 1 laforge
{{>toc}}
4 1 laforge
5 1 laforge
This is a small break-out board for m.2 (NGFF) type cellular / WWAN modems.
6 1 laforge
7 1 laforge
It allows you to insert a m.2 modem from any vendor, and it will provide you with:
8 1 laforge
9 1 laforge
* miniUSB-B (3.0) socket for connection to a USB Host (like your PC/Laptop or Embedded System)
10 1 laforge
* 5V DC input for power supply (USB supply usually insufficient for a modem)
11 1 laforge
* all unused m.2 pins on a 2.54mm break-out header
12 1 laforge
* 2x SIM card slot for a 2FF-sized SIM, USIM or RUIM cards (dual-SIM)
13 1 laforge
14 1 laforge
Particularly the break-out header is useful to get access to various signals exported in a non-standard fashion by some modem models, such as digital audio PCM.
15 1 laforge
16 1 laforge
h2. Design Files, Schematics, Component Placement
17 1 laforge
18 1 laforge
The design files can be found in the @ngff-breakout@ directory of the @osmo-small-hardware@ git repository.  See http://git.osmocom.org/osmo-small-hardware/tree/ngff-breakout
19 1 laforge
20 1 laforge
h2. Where to buy
21 1 laforge
22 1 laforge
The general idea of Open Hardware projects is that anyone is allowed to build the design. So feel free to take the design files and build it yourself, either modified or unmodified.  Please make sure you always
23 1 laforge
* attribute the original author (Attribution)
24 1 laforge
* release any changes to the design files under the same terms (Share Alike)
25 1 laforge
26 1 laforge
If you would like to buy a fully-assembled version of this board, you will be able to order it (once we have validated the design) from the "sysmocom webshop":http://shop.sysmocom.de/
Add picture from clipboard (Maximum size: 48.8 MB)