Project

General

Profile

SoftwarePage » History » Version 2

matt, 10/24/2017 05:30 AM

1 2 matt
h2.GNURadio
2
3 1 zecke
The demodulator and decoder program described below makes use of the [http://www.gnuradio.org GNURadio framework].
4
5 2 matt
h2.Receiver
6
7 1 zecke
The most basic part of the software is the [DecoderPage P25 receiver program]. This takes a signal source as its input and produces audio and a stream of messages as its output. The message streams can be captured to file or forwarded either to the TAP device or to a file for later processing. Instructions for getting and building the source code are available [BuildInstructionsPage here].
8
9 2 matt
h2.Sniffer
10
11 1 zecke
A modified version of the [http://www.wireshark.org WireShark] packet sniffer is used to inspect the contents of the message stream. Custom dissectors pick apart the P25 messages and allow the inspection of individual data items. To use !WireShark the source code distribution must be patched and then built and installed on the target platform. Details of this procedure can be found [WireSharkPage here].
Add picture from clipboard (Maximum size: 48.8 MB)