SignalScopePage » History » Revision 2
Revision 1 (max, 04/22/2017 04:04 PM) → Revision 2/30 (max, 04/22/2017 04:04 PM)
= Signal Scope = == Installation == Before running the scope app, check that the following packages are also installed: * GNU Radio * The op25 blocks * Frank's gr-fsk4 block * The op25 repeater block Other than these pre-requisites, no special setup or installation is needed. == Running with the disc-tap option == The signal scope does not require the USRP. If you have a discriminator-tapped receiver, use the "-a" option:
