Project

General

Profile

Actions

BS11LMT » History » Revision 2

« Previous | Revision 2/8 (diff) | Next »
Anonymous, 02/19/2016 10:47 PM
add LMT connector pinout


How to use LMT * connect serial port of PC with J2 on BS11 using the cable that came with the BS11 * start LMT program

=== LMT rs232 connector pinout ===

If you look at the BS-11 interface (Antenne connectors top), its the upper 8-pin connector:

{{{
The four E1 BNC connectors are above here.

(Rx) x x x x (right pin: Gnd)
(Tx) x x x x (right pin: +5V) |
+ LMT
}}}

see also [http://bs11-abis.gnumonks.org/trac/attachment/wiki/BS11_Configuration/bs11_power_lmt_cabling.jpg bs11_power_lmt_cabling.jpg]

Known Versions (and issues?)

=== LMT v4.17 ===

=== LMT v4.21 ===

Files (3)
img_6412-1.jpg View img_6412-1.jpg 255 KB , 04/21/2009 08:02 PM
img_6414-1.jpg View img_6414-1.jpg 303 KB , 04/21/2009 08:03 PM
bs11_power_lmt_cabling.jpg View bs11_power_lmt_cabling.jpg 376 KB laforge, 02/21/2016 11:10 AM

Updated by about 8 years ago · 2 revisions

Add picture from clipboard (Maximum size: 48.8 MB)