BS11LMT » History » Version 3
Anonymous, 02/19/2016 10:47 PM
| 1 | 1 | laforge | |
|---|---|---|---|
| 2 | == How to use LMT == |
||
| 3 | |||
| 4 | * connect serial port of PC with J2 on BS11 using the cable that came with the BS11 |
||
| 5 | * start LMT program |
||
| 6 | |||
| 7 | 2 | laforge | === LMT rs232 connector pinout === |
| 8 | |||
| 9 | If you look at the BS-11 interface (Antenne connectors top), its the upper 8-pin connector: |
||
| 10 | |||
| 11 | {{{ |
||
| 12 | The four E1 BNC connectors are above here. |
||
| 13 | |||
| 14 | (Rx) x x x x (right pin: Gnd) |
||
| 15 | (Tx) x x x x (right pin: +5V) |
||
| 16 | | |
||
| 17 | + LMT |
||
| 18 | }}} |
||
| 19 | |||
| 20 | see also [http://bs11-abis.gnumonks.org/trac/attachment/wiki/BS11_Configuration/bs11_power_lmt_cabling.jpg bs11_power_lmt_cabling.jpg] |
||
| 21 | |||
| 22 | 3 | laforge | '''J2:''' |
| 23 | |||
| 24 | [[Image(img_6412-1.jpg, 15%)]] |
||
| 25 | |||
| 26 | {{{ |
||
| 27 | 1(GND) |
||
| 28 | | |
||
| 29 | | 2(TX) |
||
| 30 | | | |
||
| 31 | X 0 X 0 |
||
| 32 | 0 0 X 0 |
||
| 33 | | |
||
| 34 | 3(RX) |
||
| 35 | }}} |
||
| 36 | |||
| 37 | |||
| 38 | '''RS232:''' |
||
| 39 | |||
| 40 | [[Image(img_6414-1.jpg, 15%)]] |
||
| 41 | |||
| 42 | {{{ |
||
| 43 | 1(GND) |
||
| 44 | | |
||
| 45 | | 2(TX) |
||
| 46 | | | |
||
| 47 | | | 3(RX) |
||
| 48 | | | | |
||
| 49 | X 0 X X 0 |
||
| 50 | 0 0 0 0 |
||
| 51 | }}} |
||
| 52 | 1 | laforge | == Known Versions (and issues?) == |
| 53 | |||
| 54 | === LMT v4.17 === |
||
| 55 | |||
| 56 | === LMT v4.21 === |
