Project

General

Profile

Meas web » History » Version 8

laforge, 03/23/2018 12:56 PM

1 8 laforge
{{include(cellular-infrastructure:MacroLegacy)}}
2
3 6 csaba
Not finished yet!
4 1 csaba
5
6 7 csaba
h2. Web version of the [[OpenBSC]] meas_vis utility
7
8
9
This tool will allow you to display and browse the measurement reports of [[OpenBSC]] on a web based interface.
10 2 csaba
11
https://github.com/fairwaves/meas_web
12
13
How to install and configure the meas_web utlility:
14
15
Get the code:
16
17
git clone https://github.com/fairwaves/meas_web.git
18
19
Install dependencies:
20
21
1. Install websocketd:
22
23
https://github.com/joewalnes/websocketd/releases/
24
25
In this example we are going to use a 64bit version:
26
27
wget https://github.com/joewalnes/websocketd/releases/download/v0.2.11/websocketd-0.2.11_amd64.deb
28
29
sudo dpkg -i websocketd-0.2.11_amd64.deb
30
31
2. Install runit:
32
33
sudo apt-get install runit
34 3 csaba
35
36
3. Configure runit:
37
38 4 csaba
Copy the content of the meas_web/etc folder to your /etc folder:
39
40
cd meas_web
41
42
sudo cp -avr etc /
43
44 5 csaba
4. Make sure the "meas_vis" utility is compiled:
45
46
Go to the utility folder of your openbsc source:
47
48
cd openbsc/openbsc/src/utils
49
50
If you can't find a meas_vis binary, please run:
51
52
sudo apt-get install libcdk5-dev
53
54
sudo make meas_vis
55
56
Now you need to have the binary version of meas_vis in openbsc/openbsc/src/utils
57
58
Because meas_json is not yet part of the master, you need to download and compile it:
59
60
wget http://cgit.osmocom.org/openbsc/plain/openbsc/src/utils/meas_json.c?h=achemeris/meas_json
61
62
mv meas_json.c\?h\=achemeris%2Fmeas_json meas_jscn.c
63
64
65
5. Add the following line at the bottom of your openbsc.conf:
66 3 csaba
67
mncc-int
68
 meas-feed destination 127.0.0.1 8888
Add picture from clipboard (Maximum size: 48.8 MB)