Actions
- Table of contents
- MCUF serial console
MCUF serial console¶
The serial console of the MCUF has at least three different modes:
<pre>
<pre>
h2. Command Reference MMI-ROM
h3. chg_level
change the access level. If you want level 3 access, you have to type in the two passwords: 3stooges and 4beatles
h3. set_site <siteID>
you can set the site ID (range: 0-104). However, the siteID must be identical with the siteID stored on the PCMCIA card.
It seems for a Horizon macro (master cabinet) the site ID should be 18.
If you enter a wrong site ID, you will get a _FATAL SWFM ERROR (Bad database - Cannot adjust database for site)_. The system will reboot and you can try your luck with the next site ID number ;)
Once you entered the correct siteID, the system transitions into the MMI-RAM prompt.
<pre>
MMI-ROM 1015 -> set_site 18
Setting subsystem to 19 for site 18
Process 0x95 (Temp CM) requested a self-initiated soft reset
!!! REBOOT !!!
Reset due to self-initiated soft reset
[01/01/80 00:31:38] MMI-RAM 1015 -> Waiting for System Initialization to complete.....
[01/01/80 00:31:49] MMI-RAM 1015 -> Database display commands accepted.
[01/01/80 00:31:54] MMI-RAM 1015 -> Initialization complete. All commands accepted.
</pre>
h2. Command reference MMI-RAM
h3. state <siteID>
<pre>
[01/01/80 00:32:03] MMI-RAM 1015 -> state
ERROR: Missing Parameters, only received: 0.
[01/01/80 00:32:18] MMI-RAM 1015 -> state 18
DEVICE STATUS INFORMATION FOR LOCATION 18:
OPER STATES: D:Disabled E:Enabled B:Busy
ADMIN STATES: L:Locked U:Unlocked E:Equipped S:Shutdown
Last Transition Related
Device State Reason dd/mm hh:mm:ss Function
------------- ----- ------------------------- --------------- -------------
CSFP 0 0 0 D-U NO CODE 01/01 00:31:53 None
BTP 0 0 0 B-U NO REASON 01/01 00:31:50 None
DRI 0 0 0 D-U Code Load 01/01 00:32:01 None
DRI 0 1 0 D-U DRI Not Detected 01/01 00:31:58 None
DRI 1 0 0 D-U Code Load 01/01 00:32:01 None
DRI 1 1 0 D-U DRI Not Detected 01/01 00:31:58 None
DRI 2 0 0 D-U Code Load 01/01 00:32:01 None
DRI 2 1 0 D-U DRI Not Detected 01/01 00:31:58 None
MSI 0 0 0 B-U NO REASON 01/01 00:31:56 None
MMS 0 0 0 B-U MMS Providing Clock 01/01 00:31:57 None
MMS 0 1 0 D-U Synch Loss OOS Timer 01/01 00:31:57 None
RSL 0 0 0 E-U 64Kbps Link 01/01 00:31:57 None
RSL 0 1 0 D-U NO REASON 01/01 00:31:42 None
GCLK 0 0 0 B-U GCLK in Fast Tune Mode 01/01 00:31:57 None
EAS 0 0 0 B-U NO REASON 01/01 00:31:50 None
CAB 0 0 0 B-U NO REASON 01/01 00:31:42 None
SITE 0 0 0 D-U NO REASON 01/01 00:31:42 None
PATH 0 0 0 D-U NO REASON 01/01 00:31:42 None
PATH 0 1 0 D-U NO REASON 01/01 00:31:42 None
FUNCTION STATUS INFORMATION FOR LOCATION 18:
OPER STATES: E:Enabled B:Busy ADMIN STATES: E:Equipped
Last Transition Related
Function State Reason dd/mm hh:mm:ss Device
------------- ----- ------------------------- --------------- -------------
RTF 0 0 0 E-E NO REASON 01/01 00:31:42 None
RTF 0 1 0 E-E NO REASON 01/01 00:31:42 None
RTF 1 0 0 E-E NO REASON 01/01 00:31:42 None
RTF 1 1 0 E-E NO REASON 01/01 00:31:42 None
RTF 2 0 0 E-E NO REASON 01/01 00:31:42 None
END OF STATUS REPORT
</pre>
h2. Command Reference EMON
In order to enter EMON, you need to enter level3 of MMI-ROM and then press Ctrl+N
h3. capture
<pre>
[12/06/08 01:01:36] MCU:emon_1015 % capture
Data captured 12/06/2008 00:56:49
Consumed CPU Message Message Receive Context
Process ID Time (us) Util. Send Receive Suspend Switch
-------------- --------- ------- ------- ------- ------- -------
00 Null 257143 1.01% 0 0 0 25
06 COM 1468 0.01% 1 0 1 2
07 btask 1241 0.00% 0 0 1 1
12 exec dlsp 14325 0.06% 15 22 22 22
14 tty_dlsp 15859 0.06% 1 75 28 29
16 filter 21657 0.09% 0 0 1 1
17 monitor 13700 0.05% 6 1 2 9
1E sync_fw_rl 261 0.00% 0 0 1 1
3E mcu_dlsp 10473 0.04% 7 7 3 10
50 MIP 27834 0.11% 81 25 22 39
70 mmi_rom 3163 0.01% 6 2 2 8
F1 SWFM_PRINT 4153 0.02% 0 0 0 0
Consumed CPU Message Device System
Driver/OS Time (us) Util. Send Intr. Calls
-------------- --------- ------- ------- ------- -------
EXEC 905
TTY 102 0.00% 0 3 80
FILTER 1
COM 2
NVRAM 13
HDLC 5014 0.02% 15 34 21
ROUTER 11
TIMER 321418 1.27% 0 5200 0
QUICC 1
MSW 0 0.00% 0 0 952
PIX 2
SYNC 0 0.00% 0 0 3
Transition Consumed CPU State
States Time (us) Util. Count
-------------- --------- ------- -------
Idle to INTR 24694428 97.25% 78
INTR to Idle 364 0.00% 53
CTXSW to Idle 491 0.00% 25
WARNING: Elapsed time and tick time do not match.
Elapsed time (microseconds) = 25393094
Tick time (microseconds) = 26000000
Consumed CPU Message Receive Context Device System
Time (us) Util. Snd+Rcv Suspend Switch Intr. Calls
h14. ========= ======= ======= ======= ======= =======
Totals 25393094 100.00% 264 83 147 5237 1991
Total - Null 25135951 98.99%
Elapsed time = 25.39 seconds
</pre>
h3. msw_connects
<pre>
[12/06/08 01:04:12] MCU:emon_1015 % msw_connects 0
Audit for LINK = 0.
TS Source (port-TS)
0 0x755 pattern 0x55
1 0x755 pattern 0x55
2 0x755 pattern 0x55
3 0x755 pattern 0x55
4 0x755 pattern 0x55
5 0x755 pattern 0x55
6 0x755 pattern 0x55
7 0x755 pattern 0x55
8 0x755 pattern 0x55
9 0x755 pattern 0x55
10 0x755 pattern 0x55
11 0x755 pattern 0x55
12 0x755 pattern 0x55
13 0x755 pattern 0x55
14 0x755 pattern 0x55
15 0x755 pattern 0x55
16 0x755 pattern 0x55
17 0x755 pattern 0x55
18 0x755 pattern 0x55
19 0x755 pattern 0x55
20 0x755 pattern 0x55
21 0x755 pattern 0x55
22 0x755 pattern 0x55
23 0x755 pattern 0x55
24 0x755 pattern 0x55
25 0x755 pattern 0x55
26 0x755 pattern 0x55
27 0x755 pattern 0x55
28 0x755 pattern 0x55
29 0x755 pattern 0x55
30 0x755 pattern 0x55
31 0x755 pattern 0x55
TCU Allocation Registers
TS Uplink value Downlink value
0 0x0001 0x0001
1 0x0001 0x0001
2 0x0001 0x0001
3 0x0301 0x0001
4 0x0001 0x0001
5 0x0101 0x0101
6 0x0001 0x0001
7 0x0001 0x0001
8 0x0001 0x0001
9 0x0301 0x0001
10 0x0001 0x0001
11 0x0001 0x0001
12 0x0001 0x0001
13 0x0001 0x0001
14 0x0001 0x0001
15 0x0001 0x0101
16 0x0001 0x0001
17 0x0001 0x0001
18 0x0001 0x0001
19 0x0001 0x0001
20 0x0001 0x0001
21 0x0201 0x0101
22 0x0001 0x0001
23 0x0001 0x0001
24 0x0001 0x0001
25 0x0301 0x0101
26 0x0001 0x0001
27 0x0001 0x0001
28 0x0001 0x0001
29 0x0301 0x0001
30 0x0001 0x0001
31 0x0001 0x0101
</pre>
h3. help
<pre>
[01/01/80 00:00:37] MCU:emon_1015 % help
Commands available:
! alias analyze baud
bstats ca_iir_filter capture count_reset
coverage csfp_objects cstats ctbl_objects
debug dri_msg eft ex_iir_dis
ex_iir_mod filter help history
iir_dis iir_mod iir_rte iir_time_stamp
l_dump l_modify link_test lstats
mem_use memory mmu_stats msg_send
mstats msw_connects objects pbegin
pcmcia pend perf pstats
reset rlogin router_tbl swfm
time time_stamp tstats tty_backlog_dump
unalias zstats
</pre>
h3. objects
Output of software objects with no PCMCIA card:
<pre>
[01/01/80 00:00:49] MCU:emon_1015 % objects
Object Dv Object
Num Name Version Date Time Checksum Size S Ty Specific
h3. ======== =========== =========== ===== ========== ======== = ==
000 exec 08.00.00.35 24-Jan-2008 10:58 0x01ebf709 00418345 1 09 c8
003 null 08.00.00.35 24-Jan-2008 10:58 0x00008c25 00000492 2 09 c8
004 bootlib 08.00.00.35 24-Jan-2008 11:09 0x0017f900 00017866 1 09 c8
006 ex_com 08.00.00.35 24-Jan-2008 11:04 0x001abe24 00019575 2 09 c8
007 btask 08.00.00.35 24-Jan-2008 11:05 0x0009857d 00007128 2 09 cf
008 mcuboot 08.00.00.35 24-Jan-2008 11:09 0x03d4e1ed 00807616 1 09 0f
018 ex_dlsp 08.00.00.35 24-Jan-2008 11:02 0x0033707c 00039088 2 09 c8
020 ex_tty 08.00.00.35 24-Jan-2008 10:59 0x00134363 00013699 2 09 c8
022 ex_ftr 08.00.00.35 24-Jan-2008 11:03 0x000d2ed8 00010770 2 09 c8
023 emon 08.00.00.35 24-Jan-2008 11:00 0x00831024 00094654 2 09 c8
030 xsync_f 08.00.00.35 24-Jan-2008 11:01 0x00040687 00002994 2 09 88
062 mcu_dsp 08.00.00.35 24-Jan-2008 11:06 0x002c28de 00033739 2 09 8f
080 mip 08.00.00.35 24-Jan-2008 11:08 0x007d65ab 00089895 2 09 c8
111 mmi_rom 08.00.00.35 24-Jan-2008 11:09 0x001ac15c 00019855 2 09 8f
160 uboot 06.05.00.04 20-Jun-2001 11:00 0x000c74a6 00008641 1 10 88 0000 0000
Load version information not present
</pre>
Output of objects with PCMCIA card installed:
<pre>
[12/06/08 01:03:11] MCU:emon_1015 % objects
Object Dv Object
Num Name Version Date Time Checksum Size S Ty Specific
h3. ======== =========== =========== ===== ========== ======== = ==
000 exec 08.00.00.35 24-Jan-2008 10:58 0x01ebf709 00418345 1 09 c8
002 dbase 00.00.03.fd 15-May-2008 11:12 0x026205f6 01069062 1 03 14d1 eef8
003 null 08.00.00.35 24-Jan-2008 10:58 0x00008c25 00000492 2 09 c8
004 bootlib 08.00.00.35 24-Jan-2008 11:09 0x0017f900 00017866 1 09 c8
005 libcomn 08.00.00.00 08-Jun-2004 10:59 0x00004303 00000202 1 06 f8
006 ex_com 08.00.00.35 24-Jan-2008 11:04 0x001abe24 00019575 2 09 c8
007 btask 08.00.00.35 24-Jan-2008 11:05 0x0009857d 00007128 2 09 cf
008 mcuboot 08.00.00.35 24-Jan-2008 11:09 0x03d4e1ed 00807616 1 09 0f
012 rssboot 08.00.00.35 24-Jan-2008 12:11 0x020a40c5 00290068 1 12 20
013 options 09.00.00.00 05-Mar-2008 13:04 0x0002281d 00001144 1 04
018 ex_dlsp 08.00.00.35 24-Jan-2008 11:02 0x0033707c 00039088 2 09 c8
020 ex_tty 08.00.00.35 24-Jan-2008 10:59 0x00134363 00013699 2 09 c8
022 ex_ftr 08.00.00.35 24-Jan-2008 11:03 0x000d2ed8 00010770 2 09 c8
023 emon 08.00.00.35 24-Jan-2008 11:00 0x00831024 00094654 2 09 c8
030 xsync_f 08.00.00.35 24-Jan-2008 11:01 0x00040687 00002994 2 09 88
032 cp_rrsm 08.00.00.34 07-Dec-2007 10:47 0x026ca2ec 00487135 1 05 b8
034 cp_crm 08.00.00.35 24-Jan-2008 12:04 0x056d776f 01082366 1 05 b8
036 cp_cbs 08.00.00.33 05-Nov-2007 09:52 0x007181c0 00090582 1 05 b8
048 rs_cfm 08.00.00.33 05-Nov-2007 09:51 0x00390f3b 00031855 1 07 30
049 rs_ho 08.00.00.34 07-Dec-2007 11:00 0x008bb71f 00077886 1 07 30
050 rs_lyr1 08.00.00.34 07-Dec-2007 11:16 0x00d7d4cb 00121095 1 07 30
051 rs_abis 08.00.00.34 07-Dec-2007 11:29 0x00720c0e 00063101 1 07 30
052 rs_lyr2 08.00.00.33 05-Nov-2007 10:48 0x002892c2 00022675 1 07 30
060 sm_mbts 08.00.00.33 05-Nov-2007 09:46 0x005bc0b7 00069519 1 09 3f
062 mcu_dsp 08.00.00.35 24-Jan-2008 11:06 0x002c28de 00033739 2 09 8f
068 fm_crtr 08.00.00.35 24-Jan-2008 10:59 0x0008f60c 00011626 1 06 f8
070 fm_mvp 08.00.00.35 24-Jan-2008 11:28 0x0022af26 00027024 1 09 3f
071 fm_mca 08.00.00.35 24-Jan-2008 11:54 0x041a22e4 00781446 1 09 3f
072 fm_sync 08.00.00.33 05-Nov-2007 10:46 0x003f2bff 00046487 1 09 3f
075 fm_ftp 08.00.00.34 07-Dec-2007 10:38 0x0205c69c 00409054 1 05 f8
076 fm_mmf 08.00.00.33 05-Nov-2007 11:10 0x00367cbe 00042382 1 05 b8
077 fm_sap 08.00.00.35 24-Jan-2008 11:01 0x00636f45 00077150 1 05 f8
079 fm_mfcp 08.00.00.33 05-Nov-2007 10:05 0x007d4ef2 00098860 1 17 3f
080 mip 08.00.00.35 24-Jan-2008 11:08 0x007d65ab 00089895 2 09 c8
097 st_ssp 08.00.00.33 05-Nov-2007 10:12 0x000f4cdd 00011373 1 05 b8
111 mmi_rom 08.00.00.35 24-Jan-2008 11:09 0x001ac15c 00019855 2 09 8f
113 om_cm 08.00.00.34 07-Dec-2007 11:00 0x053d9ec8 01054286 1 05 f8
120 om_mmmi 08.00.00.35 24-Jan-2008 11:33 0x038690c2 00699229 1 09 3f
160 uboot 06.05.00.04 20-Jun-2001 11:00 0x000c74a6 00008641 1 10 88 0000 0000
165 TSM_FEP 08.00.00.07 27-Oct-2004 22:31 0x00258b0f 00020528 1 16 b0 0a00 0200
166 CC_TSM 08.00.00.30 12-Sep-2007 05:31 0x008db67d 00077444 1 16 b0 0a00 1800
169 a51 08.00.00.00 22-Jun-2004 13:13 0x00011259 00001077 1 19
170 a52 08.00.00.00 22-Jun-2004 13:13 0x0001519b 00001290 1 19
177 niu 08.00.00.30 11-Sep-2007 13:01 0x0118f93a 00163419 1 10 bf 0018 0200
184 cs1_ccc 08.00.00.35 22-Jan-2008 14:39 0x010b4a4f 00146012 1 18
185 cs1_eqc 08.00.00.0a 13-Jan-2005 16:30 0x015a0a59 00185538 1 18
193 001100 08.00.00.00 21-Jun-2004 10:53 0x00014b89 00001311 1 08 b8 0011 0000
194 001100 08.00.00.00 21-Jun-2004 11:42 0x0001cdf8 00001607 1 08 b8 0011 0000
200 sync_fw 08.00.00.00 16-Jun-2004 15:52 0x007756ac 00127364 1 26 bf 000f 0000
201 SCP 08.00.00.13 19-Jul-2005 19:07 0x00ae701f 00161502 1 08 b8 0a00 0300
202 SEQ 08.00.00.09 09-Dec-2004 22:21 0x001dfba4 00029750 1 08 b8 0a00 0300
207 niu_hds 07.06.00.00 15-Nov-2000 15:23 0x015f6b88 00229657 1 10 bf 0000 0202
Load version information not present
</pre>
h3. pstats
<pre>
[12/06/08 01:02:14] MCU:emon_1015 % pstats
PROCESS USER_STACK MAILBOXES
ID NAME INSTANCE PRIORITY SIZE MAXIMUM CURRENT PEAK
-- ---- -------- -------- ---- ------- ------- ----
00 Null 00000003 00 00001000 0020 0014 0014
06 COM 00000006 05 00008000 0022 0002 0002
07 btask 00000007 01 00004000 0009 0005 0005
12 exec dlsp 00000012 19 00008000 0080 0010 0010
14 tty_dlsp 00000014 04 00004000 000c 000c 000c
16 filter 00000016 02 00004000 0009 0004 0004
17 monitor 00000017 03 00005000 0020 0014 0014
1e sync_fw_rl 0000001e 04 00004000 000c 0001 0001
3e mcu_dlsp 0000003e 05 00002000 000a 0007 0007
50 MIP 00000050 0f 00002000 0032 002c 002c
70 mmi_rom 0000006f 03 00004000 0006 0006 0006
f1 SWFM_PRINT 00000000 03 00004000 0000 0000 0000
</pre>
h2. Logs ==
Normal boot log with PCMCIA card installed ===
<pre>
!!! REBOOT !!!
Memory full configured Reset due to power reset
Checking DRAM: 16 of 16 MB complete
Motorola MCU Boot Software Version 1.8.0.0.35 24-Jan-08
Copyright 2008, Motorola Incorporated
Board type is MCU-F
QUICC microcode revision 0x0083
Exec microboot version 4
taking PCMCIA version of object 2
taking PCMCIA version of object 5
taking PCMCIA version of object 12
taking PCMCIA version of object 13
taking PCMCIA version of object 32
taking PCMCIA version of object 34
taking PCMCIA version of object 36
taking PCMCIA version of object 48
taking PCMCIA version of object 49
taking PCMCIA version of object 50
taking PCMCIA version of object 51
taking PCMCIA version of object 52
taking PCMCIA version of object 60
taking PCMCIA version of object 68
taking PCMCIA version of object 70
taking PCMCIA version of object 71
taking PCMCIA version of object 72
taking PCMCIA version of object 75
taking PCMCIA version of object 76
taking PCMCIA version of object 77
taking PCMCIA version of object 79
taking PCMCIA version of object 97
taking PCMCIA version of object 113
taking PCMCIA version of object 120
taking PCMCIA version of object 165
taking PCMCIA version of object 166
taking PCMCIA version of object 169
taking PCMCIA version of object 170
taking PCMCIA version of object 177
taking PCMCIA version of object 184
taking PCMCIA version of object 185
taking PCMCIA version of object 193
taking PCMCIA version of object 194
taking PCMCIA version of object 200
taking PCMCIA version of object 201
taking PCMCIA version of object 202
taking PCMCIA version of object 207
MMI-ROM 0000 ->
MMI-ROM 0000 ->
MMI-ROM 1015 ->
</pre>
h3. Normal boot log with no PCMCIA card installed
<pre>
!!! REBOOT !!!
Memory full configured Reset due to power reset
Checking DRAM: 16 of 16 MB complete
Motorola MCU Boot Software Version 1.8.0.0.35 24-Jan-08
Copyright 2008, Motorola Incorporated
Board type is MCU-F
QUICC microcode revision 0x0083
Exec microboot version 4
PCMCIA: Socket 0 empty.
MMI-ROM 0000 ->
MMI-ROM 0000 ->
MMI-ROM 1015 ->
</pre>
h3. emon start log after Ctrl+N
<pre>
MCU:emon_1015 %
[12/06/08 01:06:53] MCU:emon_0000 % Database is not compressed
MIP: Starting Micro IP
MIP: In slot 0
MIP: csfp_swap = 'NO_CSFP_SWAP'
MIP: Reset type is x48000025.
MIP: Current seconds is 897700014.
MIP: Soft reset count read is 0.
MIP: Writing time 897700014, count 1.
MIP: Will contact BSC.
MIP: Performing Hard Reset.
MIP: Disable phase detector 1 and 2
MIP: SYNC pulse the phase det strobe
MIP: 1015 is master MCU
MIP: Establishing links to NIU frame 0, slot 0
MIP: Establishing links to NIU frame 1, slot 0
NG EXEC DLSP dl_message_con: Control mailbox opened for channel 1,
NG EXEC DLSP dl_message_con: HDLC link active timer started for first hdlc link, channel 1
NG EXEC DLSP dl_message_con: Control mailbox opened for channel 3,
NG EXEC_DLSP process_hdlc_msg: LINK ESTABLISHED for channel 1, Link Mailbox id = 1001
NG EXEC_DLSP process_hdlc_msg: LUI mailbox created
NG EXEC_DLSP process_hdlc_msg: Low priority LAPD mailbox created
NG EXEC_DLSP process_hdlc_msg: HDLC link active timer stopped.
NG EXEC_DLSP process_hdlc_msg: NIU Flow mailbox id for local channel 1 = 3001h
MIP: HDLC link connected on frame 0, slot 0
[12/06/08 01:06:54] MCU:emon_1015 % MIP: CPU assigned ok on frame 0, slot 0
MIP: NIU/NIU2 set for E1 interface
MIP: Default span 0 CHECKED HDSL settings are, ptype=0, msett=2.
MIP: Default span 1 CHECKED HDSL settings are, ptype=0, msett=2.
MIP: Default span 2 CHECKED HDSL settings are, ptype=0, msett=2.
MIP convert_to_niu_data.c: NIU/NIU2 config type is 8, int_hdsl_flag=0, ext_hdsl_flag=0, hdsl_16_ts_flag=0.
MIP: Span response from NIU/NIU2 is PASS
MIP: Span data has been set for NIU/NIU2 on frame 0, slot 0
MIP: NIU/NIU2 set for E1 interface
MIP: Default span 0 CHECKED HDSL settings are, ptype=0, msett=2.
MIP: Default span 1 CHECKED HDSL settings are, ptype=0, msett=2.
MIP: Default span 2 CHECKED HDSL settings are, ptype=0, msett=2.
MIP convert_to_niu_data.c: NIU/NIU2 config type is 8, int_hdsl_flag=0, ext_hdsl_flag=0, hdsl_16_ts_flag=0.
MIP: Span response from NIU/NIU2 is PASS
MIP: Span data has been set for NIU/NIU2 on frame 0, slot 0
MIP: Link state 1, channel 0, span 0, timeslot 1.
MIP: Current link owner is process 80, cpu x1015, mbox x7001.
MIP: Current span is 0; current timeslot is 1; expected 0 1.
MIP: Establishing second RSL on NIU/NIU2 frame 0, slot 0, span 1, timeslot 2
MIP: Link state 1, channel 1, span 1, timeslot 2.
MIP: Current link owner is process 80, cpu x1015, mbox x7003.
MIP: Current span is 1; current timeslot is 2; expected 1 2.
NG EXEC DLSP dl_message_con: Control mailbox opened for channel 5,
NG EXEC_DLSP process_hdlc_msg: LINK ESTABLISHED for channel 5, Link Mailbox id = 9001
NG EXEC_DLSP process_hdlc_msg: NIU Flow mailbox id for local channel 5 = 5001h
MIP: HDLC link connected on frame 0, slot 0, span 1
MIP: Link state 1, channel 1, span 1, timeslot 2.
MIP: Current link owner is process 80, cpu x1015, mbox x7003.
MIP: Current span is 1; current timeslot is 2; expected 1 2.
MIP: Bad EXEC DLSP return code 1
MIP: HDLC link failed to connect on frame 1, slot 0 with code 5
MIP: Tag 0x00 indicates nv_write successful!
[12/06/08 01:12:17] MCU:emon_1015 %
</pre>
Updated by laforge about 8 years ago · 5 revisions
