OsmoGGSN » History » Revision 6
Revision 5 (wirelesss, 12/07/2016 04:28 PM) → Revision 6/34 (wirelesss, 12/08/2016 01:12 PM)
h1. [[OpenGGSN]] [[OpenGGSN]] is an implementation of the Gateway GPRS Support Node ("GGSN":http://en.wikipedia.org/wiki/GGSN) element in the GPRS core network. [[OpenGGSN]] was developed in 2002 to 2004 by Mondru AB and was abandoned for some years before adopted by the Osmocom project around 2010. h2. Source Code / git repository The source code is maintained in the osmcoom git at http://git.osmocom.org/openggsn/ h2. Binary packages OpenGGSN packages are created as part of the Osmocom nightly debian builds, see [[cellular-infrastructure:NightlyBuilds]] h2. Support / mailing lists Please direct any questions regarding use, configuration or development of OpenGGSN to the osmocom-net-gprs@lists.osmocom.org mailing list, to which you can subscribe at https://lists.osmocom.org/mailman/listinfo/osmocom-net-gprs h2. Building and using OpenGGSN with kernel-gtp Ubuntu 16.10, kernel 4.8.0-30-generic is used. * Installing dependencies and build library @libgtpnl@ You On Debian, you can install those packages with: <pre> sudo apt install libtalloc-dev libpcsclite libmnl-dev </pre> Please follow instructions provided at [[https://osmocom.org/projects/cellular-infrastructure/wiki/Build_from_Source]] in order to install these library and projects: Information about dependencies between Osmocom projects is given at the above link: * libgtpnl <pre> sudo make install sudo ldconfig </pre> * libosmocore * openggsn <pre> ./configure --enable-gtp-linux </pre> Following message is shown at end of the command @ ./configure --enable-gtp-linux@ response: <pre> openggsn Configuration: GTP Linux kernel support: yes </pre> <pre> sudo make install sudo ldconfig </pre>