Bsc nat VTY » History » Version 12
Anonymous, 02/19/2016 10:48 PM
1 | 1 | [[PageOutline]] |
|
---|---|---|---|
2 | |||
3 | 5 | laforge | This page is a reference fo all VTY commands that you can use interactively on the bsc_nat VTY telnet interface. |
4 | 1 | ||
5 | In addition, the same commands are used for the configuration file. |
||
6 | |||
7 | == configuration reference == |
||
8 | |||
9 | === nat level === |
||
10 | 4 | Configure the nat. Global settings |
|
11 | |||
12 | 6 | ==== msc ip A.B.C.D ==== |
|
13 | 4 | * Set the MSC IP address used to connect to the MSC. |
|
14 | |||
15 | 6 | ==== msc port <1-65500> ==== |
|
16 | 4 | * Set the MSC Port used to connect to the MSC. |
|
17 | 1 | ||
18 | 9 | ==== timeout auth NR ==== |
|
19 | * Time in seconds to wait for the authentication reponse of a BSC. |
||
20 | 1 | ||
21 | 9 | ==== timeout ping NR ==== |
|
22 | * Time in seconds to wait between two PING messages |
||
23 | |||
24 | ==== timeout pong NR ==== |
||
25 | * Time in seconds to wait for a reply of a PING before closing the connection |
||
26 | |||
27 | ==== token STR ==== |
||
28 | * Authentication token used to authenticate the BSC. Currently this is transfered |
||
29 | in clear text. |
||
30 | |||
31 | ==== ip-dscp TOS ==== |
||
32 | 1 | * Set the IP Type of Service (ToS) for the incoming BSC connections. |
|
33 | |||
34 | 9 | ==== access-list-name ==== |
|
35 | * The name of the access-list to use on the NAT. Only the deny rules will be evaluated. |
||
36 | |||
37 | 10 | === bsc BSC_NR === |
|
38 | 1 | * Configure the BSC with the number |
|
39 | |||
40 | 10 | ==== location_area_code <0-65535> ==== |
|
41 | 1 | * Set the location area code that this BSC is handling |
|
42 | |||
43 | 10 | ==== token TOKEN ==== |
|
44 | 1 | * A token for the BSC. The real bsc needs to send this token to use the lac and other filters. This is no real authentication or security scheme. |
|
45 | 7 | ||
46 | 10 | ==== paging forbidden (0|1) ==== |
|
47 | 9 | * Decide if paging messages should be forwarded to the BSC. |
|
48 | |||
49 | 10 | ==== description STR. ==== |
|
50 | 9 | * A description for the BSC. |
|
51 | |||
52 | 10 | ==== access-list-name STR ==== |
|
53 | 12 | * Use the access-list for the BSC. First the allow rules will be evaluated, then the deny rules. |
|
54 | 11 | ||
55 | === access lists === |
||
56 | * Configuration for access-lists controling which IMSIs are allowed to connect |
||
57 | |||
58 | ==== access-list NAME allow REGEXP ==== |
||
59 | * Add a regexp for the to be allowed IMSIs |
||
60 | |||
61 | ==== access-list NAME deny REGEXP ==== |
||
62 | * Add a regext for the to be denied IMSIs |