Project

General

Profile

Actions

Bsc nat VTY » History » Revision 13

« Previous | Revision 13/16 (diff) | Next »
Anonymous, 02/19/2016 10:48 PM
Try to make it clear that this is a list where entries are added to.


PageOutline

This page is a reference fo all VTY commands that you can use interactively on the bsc_nat VTY telnet interface.

In addition, the same commands are used for the configuration file.

configuration reference

=== nat level ===
Configure the nat. Global settings

==== msc ip A.B.C.D ==== * Set the MSC IP address used to connect to the MSC.

==== msc port <1-65500> ==== * Set the MSC Port used to connect to the MSC.

==== timeout auth NR ==== * Time in seconds to wait for the authentication reponse of a BSC.

==== timeout ping NR ==== * Time in seconds to wait between two PING messages

==== timeout pong NR ==== * Time in seconds to wait for a reply of a PING before closing the connection

==== token STR ==== * Authentication token used to authenticate the BSC. Currently this is transfered
in clear text.

==== ip-dscp TOS ==== * Set the IP Type of Service (ToS) for the incoming BSC connections.

==== access-list-name ==== * The name of the access-list to use on the NAT. Only the deny rules will be evaluated.

=== bsc BSC_NR === * Configure the BSC with the number

==== location_area_code <0-65535> ==== * Set the location area code that this BSC is handling

==== token TOKEN ==== * A token for the BSC. The real bsc needs to send this token to use the lac and other filters. This is no real authentication or security scheme.

==== paging forbidden (0|1) ==== * Decide if paging messages should be forwarded to the BSC.

==== description STR. ==== * A description for the BSC.

==== access-list-name STR ==== * Use the access-list for the BSC. First the allow rules will be evaluated, then the deny rules.

=== access lists === * Configuration for access-lists controling which IMSIs are allowed to connect

==== access-list NAME allow REGEXP ==== * Add a regexp for the to be allowed IMSI list.

==== access-list NAME deny REGEXP ==== * Add a regext for the to be denied IMSI list.

Files (0)

Updated by about 8 years ago · 13 revisions

Add picture from clipboard (Maximum size: 48.8 MB)