Bsc nat VTY » History » Revision 14
Revision 13 (Anonymous, 02/19/2016 10:48 PM) → Revision 14/16 (Anonymous, 02/19/2016 10:48 PM)
[[PageOutline]]
This page is a reference fo all VTY commands that you can use interactively on the bsc_nat VTY telnet interface.
In addition, the same commands are used for the configuration file.
== configuration reference ==
=== nat level ===
Configure the nat. Global settings
==== msc ip A.B.C.D ====
* Set the MSC IP address used to connect to the MSC.
==== msc port <1-65500> ====
* Set the MSC Port used to connect to the MSC.
==== timeout auth NR ====
* Time in seconds to wait for the authentication reponse of a BSC.
==== timeout ping NR ====
* Time in seconds to wait between two PING messages
==== timeout pong NR ====
* Time in seconds to wait for a reply of a PING before closing the connection
==== token STR ====
* Authentication token used to authenticate the BSC. Currently this is transfered
in clear text.
==== ip-dscp TOS ====
* Set the IP Type of Service (ToS) for the incoming BSC connections.
==== access-list-name ====
* The name of the access-list to use on the NAT. Only the deny rules will be evaluated.
==== no access-list-name ====
* Stop using an access-list on the NAT.
=== bsc BSC_NR ===
* Configure the BSC with the number
==== location_area_code <0-65535> ====
* Set the location area code that this BSC is handling
==== token TOKEN ====
* A token for the BSC. The real bsc needs to send this token to use the lac and other filters. This is no real authentication or security scheme.
==== paging forbidden (0|1) ====
* Decide if paging messages should be forwarded to the BSC.
==== description STR. ====
* A description for the BSC.
==== access-list-name STR ====
* Use the access-list for the BSC. First the allow rules will be evaluated, then the deny rules.
==== no access-list-name ===
* Do not use an access-list forthe BSC.
=== access lists ===
* Configuration for access-lists controling which IMSIs are allowed to connect
==== access-list NAME allow REGEXP ====
* Add a regexp for the to be allowed IMSI list.
==== access-list NAME deny REGEXP ====
* Add a regext for the to be denied IMSI list.
