OsmoDevCon2018 » History » Revision 12

« Previous | Revision 12/56 (diff) | Next »
neels, 12/06/2017 04:38 PM


This page is used to plan and coordinate regarding the Osmocom Developer Conference 2018

Osmocom Developer Conference 2018

Contrary to OsmoCon2018, the Osmocom Developer Conference 2018 (OsmoDevCon2018) is an event by project members for project members.
As such, the primary audience is people who have been contributing to at least one of the Osmocom projects.

It is not targeted at users.

Attendance requires registration (see below) and notification of acceptance. There number of participants is limited to about 20.


April 20-23rd, 2018

Time: We will start at 10am in the morning, will take lunch break from 1pm to 3pm and have an open
end at night. We have a key to IN-Berlin to come and go as we please.


In the rooms of IN-Berlin e.V., Lehrter Str. 53, 10557 Berlin, Germany, the Universe. (Map)

The meeting / seminar / conference room at IN-Berlin is located on ground floor and has windows facing east.
In front of those windows is a road + sidewalk which is directly in north-south direction,
i.e. it may be possible to set up some (GPS, Thuraya, etc.) antennas on the sidewalk, if required.
Some kind of pole+stand is required, though.


The format of this workshop is not primarily formal lectures/talks. It's more like "guided discussions", i.e. there are topics and each topic will get an "owner" who should introduce the topic and lead the discussion related to it.


(if you want to attend, please add your name below ASAP, no later than January 31st, 2018):


  1. laforge
  2. vadim
  3. tnt
  4. ptrkrysik
  5. zecke
  6. kevin


  1. Hoernchen
  2. pau
  3. neels

[please add your name if you would like to request attending the event]


TBD. We will get two keys to the rooms and will be permitted access 24 hours per day.

We intend to start at 10am on the first day, and finish around 3pm on the last day.


Thread Who What How long When
Misc TBD Adaptive Digital Predistortion on LimeSDR ? ?
Misc TBD nextepc as LTE core network ? ?
CellNet laforge state of osmo-ttcn3-hacks ? ?
CellNet pespin state of osmo-gsm-tester ? ?
CellNet nhofmeyr year 1 after the NITB split ? ?
Misc steve-m? USB VGA dongles ? ?
CellNet all Osmocom releases ? ?
? TBD jenkins, gerrit, tooling ? ?

Workshop / Hacking

Who What How long

Avoiding dehydration during the day

IN-Berlin has a fridge with a selection of cold beverages (lemonades, club mate, water, beers) available to be purchased at extremely low prices (about 1 EUR / bottle). There are tea and coffee-making facilities. They also carry some candy-bar type snacks. There are several supermarkets within walking distance from the venue, if you'd like to bring your own.


This year we'll have light lunches (sandwiches, salads, cold cuts) brought to IN-Berlin every day. Cooked food will be served only for dinner. Exception is the final day (Monday).

Date Supplier Type of Food


Dinner catering will be brought into IN-Berlin every night. Sponsoring is TBD.

Date Supplier Type of Food


Travel funding is currently not yet available from any sponsor.


Berlin still has two active airports during OsmoDevCon2018: Tegel (TXL) and Schoenefeld (SXF). TXL is closer to the venue.


You can take long distance trains to Berlin Hauptbahnhof (main station), which is only 15mins walking (or 3 bus stops) from the venue.

Public Transport

Check for maps, fares, etc.


There is some public parking in Lehrter Str., where IN-Berlin is located, but it is quite crowded. Parking your car might
not be easy.


Berlin has tons of options, from very cheap to plush and expensive. Pick your favorite.

The closest low-end option in walking distance (about 7 mins) is the A&O Hostel Berlin-Hauptbahnhof.

A more expensive alternative within 15 minutes of walking is Motel One Berlin-Hauptbahnhof

Who brings what kind of equipment/supplies?

Qty Description Who
- Coffee, Coffee Filters laforge
- Milk (for coffee) laforge

Technical Equipment

Qty Description Who
3 power strips with 10 outlets laforge
1 Fan-less 16-port Ethernet switch for main table laforge
plenty Ethernet cabling in various length laforge
1 Duct Tape laforge
>=1 sysmoBTS (any model) laforge
>=1 nano3G laforge
1 FreeCalypso FCDEV3B laforge
Files (0)

Updated by neels about 6 years ago · 12 revisions

Add picture from clipboard (Maximum size: 48.8 MB)