Osmo-sip-connector » History » Revision 23
Revision 22 (dexter, 02/06/2017 03:31 PM) → Revision 23/87 (dexter, 02/06/2017 03:32 PM)
h1. Osmo-sip-connector
h2. Introduction
osmo-sip-connector translates between MNCC and SIP protocols. It does not handle RTP by itself but with the help of external SIP server it can be used for tests.
Sample configuration:
<pre>
app
mncc
socket-path /tmp/bsc_mncc
sip
local 10.9.10.105 5069
remote 10.9.10.105 5060
</pre>
Running osmo-sip-connector:
<pre>
osmo-sip-connector -c ~/.config/osmocom/osmo-sip-connector.cfg
</pre>
Running NITB:
<pre>
./src/osmo-nitb/osmo-nitb -c ~/.config/osmocom/open-bsc.cfg -l ~/.config/osmocom/hlr.sqlite3 -d DLMUX:DRTP -m
</pre>
The configuration above assumes that SIP server is running on the same machine. Attached is example configuration file for Kamailio https://www.kamailio.org SIP server which can be used to route calls between mobile phones. It also handles 2 special numbers 500 (routed to sip:music@iptel.org) and 600 (routed to sip:echo@iptel.org): by dialing them you can use echo test or hear nice music from your mobile.
*Note:* in attached kamailio.cfg, for 64bit systems, you may need to adjust
<pre>
mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/"
</pre>
N. B: Those numbers are meant only as an example for quick tests - please consider running your own Asterisk instance if you expect more than couple of calls, do not abuse http://www.iptel.org/service
h2. Asterisk howto
This howto was created and tested using Debian 8.7.1. It is assumed that there is already a working installation of osmo-nitb already exists. In the following steps we will show how to integrate an existing installation with asterisk using osmo-sip-connector. The following image illustrates how the network components wile be laid out:
{{graphviz_link()
digraph G{
//rankdir = LR;
Phone -> BTS [label = "Um"];
BTS -> "osmo-nitb" [label = "A.bis"];
"osmo-nitb" -> "osmo-sip-connector" [label = "mncc"];
"osmo-sip-connector" -> "asterisk" [label = "sip"];
"BTS" -> "asterisk" [label = "rtp"];
}
}}
h3. Preparations
As we assume that we use an existing and working osmo-nitb configuration as a starting point most of the relevant dependencies are already installed.
h4. Install dependancies
The extension we are about to make requires to install some additional packages.
<pre>
sudo apt-get install libsofia-sip-ua-glib-dev
sudo apt-get install asterisk
</pre>
h4. Install osmo-sip-connector
The installation of osmo-sip-connector is as straight forward as you know it already from other osmocom projects:
<pre>
git clone git://git.osmocom.org/osmo-sip-connector.git
cd osmo-sip-connector/
autoreconf -fi
./configure
make
sudo make install
</pre>
